推力室涡流冷却技术试验研究

涡流冷却是一种新型液体火箭发动机推力室冷却技术。在理论分析和数值计算的基础上,设计了采用气氢/气氧作为推进剂的试验用涡流冷却推力室,进行了多次冷流试验和点火试验。在不采用其它冷却措施的情况下,完成了工作时间为20s的点火试验。试验结果表明,涡流冷却推力室工作稳定,气氧形成了有效的冷涡流,圆筒段外壁面温升为5K,部分气氧形成的气膜也对喷管形成了有效的保护。     

涡轮试验台燃烧装置建模与仿真()基于混合物分数的分区模型

针对以空气、煤油为反应物的涡轮试验台燃烧装置及其出口段建立了一种系统层次上的可以处理燃烧和流动耦合效应的模块化数值模型,并提出了一种基于混合物分数的热力计算方案和混合物分数方程,与基于质量流量混合比模型的仿真结果以及试验结果的对比表明,基于混合物分数的模型解决了以往研究中存在的瞬态仿真稳定性问题,并具有与试验结果一致的仿真精度。     

Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

单反射面紧缩场接收机灵敏度要求评估方法

根据洛伦兹互易定理,提出了一种对单反射面紧缩场接收机灵敏度要求进行评估的方法.分别计算紧缩场馈源发射的电磁波以及标准定标球散射的电磁波在位于反射面和静区中间的参考平面上的近场分布,并考虑反射面效率和馈源发射功率,即可得到在测量过程中,对接收机灵敏度的要求.该方法能够全面反应目标雷达散射截面、工作频率、馈源性能和位置、反射面形状尺寸及其边齿结构和边缘绕射、紧缩场静区中心位置等因素的影响.利用该方法对北京航空航天大学微波暗室紧缩场的接收机灵敏度要求进行评估,并与实验测试结果对比,进而验证该方法的正确性.     

内并联型TBCC进气道方案设计及验证

提出了一种带可变几何泄流腔的内并联型涡轮基组合循环(TBCC)进气道设计方案.介绍了进气道的总体设计思路,给出了进气道的设计马赫数、转级马赫数及飞行轨迹,对不同来流条件下进气道的工作方式以及全马赫数范围进气道型面调整的安排进行了论述,确定了进气道主要气动参数与型面参数的选取原则.通过数值模拟和高速风洞试验的手段,对进气道设计方案的可行性进行了验证.数值模拟结果表明:当Ma₀≤2.5时,进气道的总压恢复系数均在0.8以上,当2.5<Ma₀≤4.5时,进气道的总压恢复系数均在0.3以上,符合进气道总体方案的要求;冲压模态下,冲压通道的出口马赫数均小于0.4,出口静压均大于0.5个标准大气压,均能满足冲压燃烧室的燃烧需求.风洞试验结果表明:模态转换过程中,进气道涡轮通道具有良好的进/发匹配特性,且进气道涡轮/冲压通道具有良好的相容性能.研究结果可为我国开展组合动力研究提供方案参考和技术储备.      

全尺寸飞机结构试验技术

全尺寸飞机结构试验是以对真实的飞机结构施加外载的方式,模拟其在使用中可能遇到的受载情况。通过测量飞机的响应,核对其设计是否达到要求,检验飞机是否安全可靠。全尺寸飞机结构试验作为一种传统的、可靠的验证手段,一直占据着不可替代的重要位置。本文结合飞机结构试验技术的发展,对全尺寸飞机结构试验相关技术进行了分析。     

自动组卷系统试题数据库的设计与实现

目的为了在自动组卷系统中合理地保存试题和试卷;方法利用数据库函数简化字段生成操作,在组卷后较好的保存试卷信息;结果提出一种试题数据库设计方案,能够合理保存试题;结论在实际使用中取得较好的效果。     

Full-scale crash test and FEM simulation of a crashworthy helicopter seat

Crashworthy seat structure with considerable energy absorption capacity is a key component for aircraft to improve its crashworthiness and occupant survivability in emergencies.According to Federal Aviation Administration(FAA) regulations,seat performance must be certified by dynamic crash test which is quite expensive and time-consuming.For this reason,numerical simulation is a more efficient and economical approach to provide the possibility to assess seat performances and predict occupant responses.A numerical simulation of the crashworthy seat structure was presented and the results were also compared with the full-scale crash test data.In the numerical simulation,a full-scale three-dimensional finite element model of the seat/occupant structure was developed using a nonlinear and explicit dynamic finite element code LS-DYNA3D.Emphasis of the numerical simulation was on predicting the dynamic response of seat/occupant system,including the occupant motion which may lead to injuries,the occupant acceleration-time histories,and the energy absorbing behavior of the energy absorbers.The agreement between the simulation and the physical test suggestes that the developed numerical simulation can be a feasible substitute for the dynamic crash test.      

激光冲击强化提高主动连杆振动疲劳性能

针对某型发动机放气活门主动连杆转接R处的疲劳断裂问题,进行了主动连杆激光冲击强化工艺研究;完成了原型件和激光冲击强化、喷丸及加大R3种处理工艺后主动连杆振动疲劳对比试验.结果表明,在317MPa的应力水平下,激光冲击强化、喷丸和加大R后主动连杆疲劳寿命分别为原型件的5.24倍、3.89倍及1.36倍;与其它2种工艺相比,激光冲击强化具有强化效果好、工艺稳定性高、易于实现等优点,是截至目前减少主动连杆疲劳断裂故障的最佳处理工艺.主动连杆激光冲击强化后表面粗糙度较小,产生深度约1.4mm的高数值残余压应力层,表层晶粒细化至纳米晶并伴随高密度位错.三者共同作用可以有效缓解转接R处的应力集中,抑制疲劳裂纹在转接R处的萌生和扩展,是主动连杆振动疲劳寿命提高的主要原因.     

泵前阀开关波纹管组件改进设计

某型号发动机泵前阀在抽典试验中开关腔波纹管组件发生了疲劳失效,经对失效原因及机理进行分析,对波纹管组件进行了改进设计,并对原状态波纹管组件及新设计进行了有限元计算分析和疲劳寿命估计。计算结果表明,新设计波纹管应力分布相对合理,疲劳寿命水平有较大提高。设计改进后生产了试验件并进行了阀门试验,试验与计算结果相当并满足发动机使用要求。