Evolution of the periodicities in 2S 0114+650

We have analysed 9 years of data from the All Sky Monitor on the Rossi X-ray Timing Explorer for 2S 0114+650 to study the evolution of its spin, binary, and super-orbital periods. The spin history of the neutron star in this system exhibits torque reversals lasting 1 year. The newly discovered super-orbital period has remained stable over the 9-year span, making 2S 0114+650 the fourth known system to exhibit stable super-orbital modulation. We compare its super-orbital period evolution with those of the other three such systems.     

S形蒙皮零件成形工艺

通过运用S3F软件对S形蒙皮拉形过程进行模拟仿真分析,评估S蒙皮拉形工艺性;预测拉形过程中将产生的缺陷;制定合理工艺方案;优化零件设计和模具结构;实现了该蒙皮零件在数控蒙皮拉伸机上的拉形。     

Near infrared studies of the massive X-ray binary 2S 0114+65

We present near-infrared spectroscopy of the massive X-ray binary 2S 0114+650. These observations covering the spectral range 1.08–2.35 μm span the region where Paschen and Brackett series recombination lines of hydrogen are expected to be seen, namely, Paβ , Brγ and Br 10–17 lines. The absence of any of these lines in emission supports earlier inferences that the optical component in 2S 0114+650 is unlikely to be a Be star but rather a B type supergiant. Near-IR photometry gives J = 8.78, H = 8.53 and K = 7.96; these values show marginal variations from earlier reported measurements.     

宇航矢量伺服控制器在SiP中的设计与实现

磁场导向控制FOC（field-oriented control）矢量控制算法在伺服驱动控制系统中一般由CPU或DSP实现，难以满足航天应用中实时性较高场景下的需求。为提高宇航电机系统控制的实时性与可靠性，从FOC矢量控制算法的硬件加速角度出发，详细介绍了伺服控制器的设计，给出了一种全数字、高性能的伺服控制器硬件加速设计方案，并在具有可编程逻辑功能的宇航级SiP6117S芯片上进行了验证。仿真实验表明，相比于前人的设计，通过调整观测数据的量化精度来降低硬件加速过程中的处理延时，能有效改善多级流水延迟并在一定程度上提升算法的实时性。     

Evaluation of geomagnetic field models using magnetometer measurements for satellite attitude determination system at low earth orbits: Case studies

In this study, different geomagnetic field models are compared in order to study the errors resulting from the representation of magnetic fields that affect the satellite attitude system. For this purpose, we used magnetometer data from two Low Earth Orbit (LEO) spacecraft and the geomagnetic models IGRF-12 (Thébault et al., 2015) and T89 (Tsyganenko, 1989) models to study the differences between the magnetic field components, strength and the angle between the predicted and observed vector magnetic fields. The comparisons were made during geomagnetically active and quiet days to see the effects of the geomagnetic storms and sub-storms on the predicted and observed magnetic fields and angles. The angles, in turn, are used to estimate the spacecraft attitude and hence, the differences between model and observations as well as between two models become important to determine and reduce the errors associated with the models under different space environment conditions. We show that the models differ from the observations even during the geomagnetically quiet times but the associated errors during the geomagnetically active times increase. We find that the T89 model gives closer predictions to the observations, especially during active times and the errors are smaller compared to the IGRF-12 model. The magnitude of the error in the angle under both environmental conditions was found to be less than 1°. For the first time, the geomagnetic models were used to address the effects of the near Earth space environment on the satellite attitude.     

旋翼跨音速非定常黏性绕流的高效CFD模拟方法

为提高旋翼跨音速黏性绕流CFD模拟的效率,建立了一套基于隐式LU-SGS算法和OpenMP并行策略的旋翼非定常流场高效数值求解方法。首先,基于二维剖面翼型的Poisson方程求解和网格插值、翻折方法生成绕桨叶的O-C-O型贴体正交网格,并采用高效的"扰动衍射"(Disturbance diffraction method,DDM)挖洞方法、并行化″Inverse map″(IM)的贡献单元搜索方法,构建了旋翼运动嵌套网格系统。在此基础上,以耦合S-A湍流模型的非定常RANS方程为主控方程,对流通量采用高精度的Roe-MUSCL格式进行离散,时间推进采用隐式LU-SGS双时间方法,同时采用OpenMP并行策略加速旋翼流场求解。最后,运用所建立的方法分别对悬停ONERA 7A旋翼、前飞Caradonna-Tung(C-T)旋翼无升力状态及SA349/2旋翼有升力状态的气动特性及涡尾迹特征进行了模拟,通过与试验值对比验证了文中方法在旋翼非定常流场CFD模拟中的有效性和高效性。     

基于μC/OS-Ⅱ的串口通信在S3C2410A上的实现

文章在三星公司的嵌入式处理器S3C2410A为核心的硬件平台上,将嵌入式实时操作系统μC/OS-Ⅱ和μC/GUI在ARM9上整合实现,成功地实现了基于μC/OS-Ⅱ在S3C2410A上的双向串口通信功能。     

民用航空发动机维修工程分析平台设计与实现

随着国产民用大飞机的研制和应用,民用航空发动机的研制和应用需求也逐步显现。为了提高国内民用航空发动机的派遣可靠性,需要对其维修工程服务产品进行专业分析,并通过信息化、规范化的方法促进其维修工程服务产品的发展和应用。首先,研究民用航空发动机维修工程分析的技术应用和行业发展,基于发动机维修工程分析和相关标准规范明确平台的核心模块功能和开发需求;在此基础上,开发发动机维修工程分析平台,并通过实际操作测试平台的各项功能;最后,以发动机燃控系统为例验证该平台的可操作性。结果表明：发动机维修工程分析平台各项功能正常、流程完善、数据合理,为后期设计优化和工程迭代工作奠定了重要的数据基础。     

基于RT—LAB的半实物仿真系统研究

半实物仿真是导弹研制过程中的一个重要环节,仿真实验可以最小的成本检验导弹各个部件的性能及工作的协调性。本文基于某型红外导引头半实物仿真系统,详细介绍了QNX下自制板卡驱动程序的开发方法、编程要点以及可能遇到的问题,给出了RT～LAB软件的使用方法以及仿真模型的搭建方法。研究表明,RT—LAB可以方便快捷地将Simulink模型应用于半实物仿真系统,使用QNX系统作为目标节点,提高了仿真系统的实时性、稳定性和可靠性。某型红外导引头的半实物仿真系统中的运行结果表明该系统运行稳定、可靠。