用Radon变换迭代法重建含有遮挡物的三维折射率场

本文通过计算机模拟研究，结合气体折射率场的光验知识．考查了将Ｒａｄｏｎ变换迭代法用于光学干涉层析计量含有遮挡物的三维折射率场的重建精度。作为一个应用实例，测量和计算了某一截面的气体温度分布，并与热电偶测量的值进行了比较。     

New multifrequency measurements of the spectrum of the cosmic background radiation

New measurements of the Cosmic Background Radiation temperature at 12 cm, 6.3 cm, 3 cm, 0.9 cm and 0.3 cm have made in July 1982 from the White Mountain High Altitude Research Station. The results are presented and the existence of spectral distortions discussed.     

空间飞行与回转器回旋条件下青菜开花与花粉发育的研究

比较研究了SJ-8返回式卫星留轨舱微重力条件与地面三维回转模拟微重力条件下青菜生长与发育情况.研究发现空间微重力条件下青菜开花过程需要大约18 h,明显长于地面对照5 h左右.回转器模拟实验结果表明,改变重力影响了花瓣的伸展与发育及花粉的产量,回转条件下花粉细胞中的微管排列明显不同于静止对照.细胞骨架受到干扰可能是改变重力条件下花粉产量降低的原因之一.本研究首次报道了在空间飞行试验中成功地采用了显微实时图像技术观察植物的开花过程,并获得了从花蕾到开花结束各阶段清晰的图像.      

三乙胺与硝酸-27S自燃技术研究

三乙胺和硝酸-27S作为自燃推进剂可应用于火箭发动机中。对这两种自燃推进剂的燃烧性能进行了研究,应用逐步逼近法计算其热力性质,当最佳混合比为4．1,燃烧室压力为4．5MPa时,最佳海平面比冲为2786m／s。通过试验证明了三乙胺和硝酸-27S自燃技术的可行性。     

红外反射材料In(Sn)2O3(ITO)的微波吸收性能

测试7.7vol%和15.8vol%In(Sn)2O3(ITO)/石蜡在2~18GHz的介电谱。测定10vol%和20vol%In(Sn)2O3(ITO)/环氧树脂在2~8GHz的反射率。结果显示,ITO材料具有很好的介电损耗。当涂层厚度d=3mm时,两种涂层分别在4.51GHz和6.27GHz有-10.5dB和-14dB的反射率。理论值显示,15.8vol%ITO/石蜡复合材料在4.56~11GHz的反射率低于-10dB,有好的吸波性能。同时分析ITO的介电损耗机理。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

基于枝切截断的高质量相位解缠算法

针对传统枝切截断相位解缠算法受残差检测理论缺陷的影响,不能实现对相位完全正确解缠,在总结枝切截断法和质量图导向法的基础上,提出一种新的相位解缠算法。在残差检测理论的基础上,使用一种新的表征相位质量的可靠性导向图指导放置枝切阻断线,对低质量相位的界定使用一种自适应阈值的方法使残差检测达到最优,提高了相位解缠的质量。对于一些背景噪声严重的情况,调制度预处理的方法提高了相位解缠的鲁棒性。实验结果表明,该算法能自动避开相位不连续区域,得到较高质量的相位解缠结果。     

基于3D打印技术的微波开关设计与实践

文章介绍了一种基于3D打印技术的R型波导开关的设计方法,并对影响微波开关性能指标的射频参数、切换时间进行了验证。验证结果表明,微波开关的射频指标无恶化,切换时间缩短,微波开关可靠性得到提升。通过3D打印技术的应用,减轻开关重量17%以上,生产周期缩短60%以上。文章论述了微波开关射频指标、切换时间的设计过程和验证结果,解决了X频段R型波导开关切换时间长和重量大的不足,为波导微波开关制造提供了一种新的途径。     

双模块下颌式内转进气道/圆锥前体一体化布局研究

为实现三维内转进气道的内收缩流场与圆锥前体的外压缩流场的良好匹配,提出了一种双模块下颌式内转进气道/圆锥前体(Double-modules Chin Inward-turning Inlet and Conical Forebody,DCII/CF)一体化设计方法,获得一种新颖的双发并置、侧向安装的DCII/CF一体化布局。针对该布局形式,开展了DCII/CF一体化构型与传统的单模块内转进气道/圆锥前体(Single-module Inward-turning Inlet and Conical Forebody,SII/CF)一体化构型的数值对比研究。结果表明：DCII/CF一体化布局不仅为内转进气道提供了优秀的前体附面层排移效果,还有效避免了传统SII/CF布局中前体附面层与进气道内部流场之间的相互干扰。在Ma∞=6.0设计状态,DCII/CF一体化布局的进气道总压恢复系数相较传统的SII/CF布局有了显著提高,从0.403提高至0.482;但由于前体附面层的排移,该布局的捕获流量略有降低, SII/CF的流量系数为0.956,该布局则为0.917。而在非设计状态,该布局形式同样具备较好的总压恢复性能,在Ma∞=5.0与Ma∞=4.0的总压恢复系数分别达到了0.586和0.682,明显高于SII/CF的总压恢复系数0.507和0.619。     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.