Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

几种常用格式和湍流模型在高速流动中的适用性研究

针对高超声速飞行器中存在的强激波、激波/边界层干扰、分离、湍流等复杂流动现象,对比分析了当前计算流体力学中的主要空间离散格式及湍流模型,发现不同格式对强激波的分辨率基本相同,Roe和LDE(low diffusion E-CUSP(convective upwind split pressure))格式对摩擦因数和传热系数的模拟优于其他格式;S-A(Spalart-Allmaras)一方程湍流模型计算的摩擦因数比k-ωSST(shear stress transport)两方程湍流模型高10%左右,而后者预测的分离区约为前者的2倍,且分离点靠前.     

INS/GNSS组合导航系统校准方法

惯性导航系统(INS)和全球导航卫星系统(GNSS)组合的导航系统应用越来越广泛,它的校准问题亟待解决。本文简要介绍了目前广泛使用的各种导航系统,论述了INS/GNSS组合导航系统的工作原理及组合算法;详细分析了INS/GNSS组合导航系统各种测试及校准方法,比较了各种校准方法的优缺点;提出了INS/GNSS组合导航系统校准装置应具备的条件:可产生标准的空间位置和速度、可产生标准的姿态角度变化、可有效地接收GNSS卫星信号、统一的时间基准与同步信号。     

基于某型发动机发展 STOVL 动力性能方案研究

短距起飞/垂直降落（STOVL）飞机由于其优越的作战性能,受到了世界航空大国的高度重视。通过借鉴目前最先进的 STOVL 动力 F135- PW -600发动机技术发展思路,研究了基于国内某型发动机改 STOVL 动力方案时,主发动机与升力风扇之间的匹配和约束关系。研究结果表明：随着升力风扇压比和流量的增加,主发动机升力减小,升力风扇升力增加;同一主发动机状态下,升力风扇流量越大,发动机前后升力平衡的升力风扇压比越小,总升力越大;主发动机性能越高,发动机前后升力平衡的升力风扇压比和流量越大,发动机总升力也越大。     

SINS/GNSS组合导航测试系统用惯导模拟源技术研究

针对光纤陀螺SINS(捷联惯性导航系统)与GNSS(全球卫星导航系统)组合导航产品高动态性能测试难的问题,本文研究了一种组合导航测试系统,并对捷联惯导模拟源进行了重点研究.首先以捷联惯导解算算法为基础逆推出了捷联惯导模拟源算法,然后对捷联惯导模拟源进行了功能实现,可以与导航卫星信号模拟源同步向组合导航计算机发送数据用于组合导航解算.最后对捷联惯导模拟源的功能与性能进行了验证.结果表明,捷联惯导模拟源功能正常,模拟数据的精度达到设计要求.利用此惯导模拟源与导航卫星信号模拟源配套使用,将可满足后续SINS/GNSS组合导航系统的相关性能测试或验证要求.     

浅析运输类飞机经济舱头排旅客座椅头部损伤判据的影响因素

介绍了头部损伤判据HIC的概念、适航要求及影响运输类飞机客舱头排旅客座椅HIC的相关参数;叙述了旅客座椅头排距、头部撞击壁板的刚度、安全带织带伸长率、乘坐摩擦系数等参数的影响和重要程度;对如何设计符合HIC要求的经济舱头排旅客座椅和壁板提出了建议。     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.     

飞机冲压空气涡轮系统的动态特性分析

冲压空气涡轮是飞机能源失效时使用的关键应急系统。首先依据冲击空气涡轮（RAT）工作原理确定其物理架构；然后对涡轮部件、能源转换装置、展开装置和展开随动机构等4个主要部件进行力学分析，建立各部件的力学方程组。依据该力学方程组，建立涉及力学、液压、刚体动力学的多学科冲压空气涡轮系统模型。使用该模型仿真了某真实系统在不同工况和设计参数下的动态特性，研究了关键设计参数对系统性能的影响，为冲压空气涡轮系统正向设计提供依据。最终，某型冲压空气涡轮系统风洞试验数据验证了所提系统模型的准确性。