Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

航天器虚拟热试验平台的软件架构及其应用

针对我国目前航天领域型号试验任务重、成本高的特点,文章提出搭建航天器虚拟热试验平台以缩短型号研制周期、减少研发成本。虚拟热试验平台结构拟由5个单独模块组成:试验系统描述及边界条件输入模块,虚拟试验运算模块,模型修正模块,结果报表及经济性分析模块和虚拟试验数据库。另外提出了虚拟热试验平台在航天器真空热试验中的应用。     

深空探测器热控系统设计方法研究

针对国外深空探测器热控系统设计方法进行了调研和综述,并在此基础上提出了深空探测器的热控系统设计特点,为我国深空探测器热控系统的设计提供参考。     

高速旋转部件在载人航天器热控系统中的应用

文章阐述了高速旋转部件在载人航天器热控系统中的应用现状,提出了增长部件寿命、改进系统可靠性的建议并介绍了磁悬浮技术。     

模糊自整定PID控制及其在航天产品真空热试验中的应用分析

文章首先分析了航天产品热试验时被控对象的特点,并进行了建模分析,接着介绍了如何通过参数自整定技术获得PID的3个初始参数,并进行了模糊自校正PID控制器设计。为了检验该控制方法的控制效果,文章选取了3次有代表性的试验数据进行了仿真分析。结果表明,模糊自校正PID控制方法具有适应性强、控制精度高、抑制试验系统温度滞后明显的优点,该方法较原控制方法超调量有所减小,过渡过程有所加快,抗干扰能力显著增强,较好地解决了控制系统快速性和小超调量之间的矛盾。     

舵机滚珠丝杠在内部热源作用下响应特性

舵机滚珠丝杠在运行过程中由于摩擦作用和电机运行产生的内部热源会导致其结构温度上升和变形,是影响滚珠丝杠副运行精度的因素之一。本文基于有限元理论建立舵机滚珠丝杠副模型,并通过在ANSYS Workbench中插入命令流的方式实现了在滚珠丝杠上施加移动摩擦热载荷,获得了滚珠丝杠副在内部热源作用下的温度、变形和应力响应特性。结果表明:滚珠丝杠轴向热流密度呈双峰趋势,且其高温区域主要集中在螺母行程范围内的中间区域;随着转速的增加,滚珠丝杠各处温度及其波动幅度加大;丝杠最大热应力位于与轴承配合的轴肩最外侧处。     

基于磁路法与等效热网络法的航天 永磁同步电机设计与仿真

针对航天永磁同步电机方案初步设计耗时长、过度依赖商业软件的问题,基于磁路法和热网络法,提出了一套方案设计阶段航天永磁同步电机磁热性能快速预估与仿真方法。给出了定子内径、定子外径、铁芯长度、匝数等关键参数的取值准则,建立了包含36个节点集总参数热网络模型,并以端部绕组为例给出了热平衡方程的详细推导过程。通过与成熟商业软件对比,其电磁计算最大误差出现在电流有效值上,偏差值为607%;与样机实测值对比,绕组温升最大误差为73%,满足方案设计阶段预示精度要求,为方案设计阶段航天永磁同步电机快速性能预估提供有力支撑。     

固体火箭发动机燃烧、热结构与内流场国防科技重点实验室

固体火箭发动机燃烧、热结构与内流场国防科技重点实验室,是我国惟一的固体火箭推进领域的国家级重点实验室,由航天科技集团公司第四研究院第四十一所和西北工业大学联合建设。自1995年建成以来,已具备了国内一流的研究条件,成为我国开展先进固体推进技术自主创新研究、人才培养、学术交流与合作、科学实验的开放式研究平台。