软件可靠性测试数据生成方法研究

阐述了构造非实时软件运行剖面的方法,以及根据运行剖面生成非实时软件可靠性测试数据的方法,并提出了构造实时软件运行剖面和生成实时软件可靠性测试数据的思路。最后给出实例,系统地演示非实时软件可靠性测试数据的生成过程。     

基于复合疲劳试验的涡轮叶片振动应力反推法

提出了一种利用复合疲劳试验和外场故障数据反推涡轮叶片实际振动应力的方法.该方法针对与故障叶片同批次的叶片,开展数个振动应力水平下的单件试验和某一特定振动应力水平下的成组试验,利用极大似然法推导出叶片的概率-应力-寿命曲线(P-S-N);最后基于99.87%存活率下的概率-应力-寿命曲(P_99.87%-S-N),结合叶片的外场故障统计结果,反推出叶片实际工作中振动应力的范围和可能的最大振动应力.      

基于开源GIS数据的广域小重叠卫星影像定位模型精化

设计了一种适用于大区域、小重叠卫星影像有理多项式模型(RPC)定位精度优化的技术流程,基于开源数字正射影像(DOM)、数字高程模型(DEM)数据和RPC几何模型约束,通过优化尺度不变特征变换(SIFT)特征提取与匹配算法,实现了无像幅约束的控制点和连接点的快速稳健匹配,应用DEM支持下的RPC模型二维区域网方法实现了多景影像RPC模型精度的联合精化。GF-1卫星WFV影像的实验结果表明:在DEM支持下经过区域网平差后,RPC模型的定位精度可达到像素级水平。     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.     

旋转捷联惯导系统原理及典型方案分析

旋转捷联惯导系统采用旋转调制误差补偿技术对陀螺仪和加速度计误差进行调制,可以提高系统导航精度。文章借助捷联系统基本误差方程,简要分析了旋转调制误差补偿的机理;通过对几种典型IMU旋转方案的分析和仿真,验证了旋转调制误差补偿技术的有效性并比较了不同旋转方案的特点。     

立足服务求双赢 创新发展助航天

<正>航天是既需要传统的制造手段,又需要结合现代的设计和虚拟制造技术的典型行业。唯有如此,才能满足日益增长的技术性能要求。ESI集团作为虚拟测试方案的先锋,多年来开发了一系列连贯的应用软件,经过航天工业生产的验证,不仅能够组合成多种专业的价值链,更是形     

环喉型塞式喷管的数值仿真研究

通过流场数值仿真计算方法对环喉型塞式喷管进行了研究,对比计算了不同外流条件下塞式喷管的流场结构和性能.分析表明该塞式喷管的结构方案独特,具有稳定的高空高速性能,与传统的钟型喷管相比低空性能更优异.     

一种适用于高速OFDM的符号定时同步算法

OFDM系统以其优秀的频带利用率受到了广泛的应用。本文就OFDM系统在高速数据传输环境下出现的符号定时同步问题与经典同步算法中的问题的不同点做了分析,并对针对小子载波数情况出现的不同对已有的经典符号定时同步算法做出了相应的改进。最后使用Matlab对其进行了仿真,可以得出在小子载波数的情况下捕获性能良好,是一种可以用于高速OFDM系统的符号定时同步算法。     

一种双钟型喷管液氧/甲烷发动机系统方案

根据双钟型喷管高度补偿特点及技术研究现状,提出了一种双钟型喷管液氧甲烷发动机系统方案,进行了双钟型喷管基弧段及延伸段面积比优化,并与其他系统方案进行了性能对比分析。研究表明,对于地面起动的芯级发动机,采用双钟型喷管是提高发动机综合比冲性能以及运载器有效载荷的有效途径。