Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.     

Flutter analysis of an airfoil with nonlinear damping using equivalent linearization

The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.     

结合损伤力学与有限元方法预估铆接结构疲劳寿命

利用飞机铆接试验件疲劳试验数据,结合损伤力学与有限元方法,通过MATLAB调用ABAQUS进行损伤演化方程参数的遗传优化反演。将反演得到的损伤演化方程用于飞机结构疲劳寿命预估中,对机翼蒙皮锪窝形式的铆接结构进行了寿命计算和分析,并与试验数据作对比,证明了方法的可行性。     

浅析运输类飞机经济舱头排旅客座椅头部损伤判据的影响因素

介绍了头部损伤判据HIC的概念、适航要求及影响运输类飞机客舱头排旅客座椅HIC的相关参数;叙述了旅客座椅头排距、头部撞击壁板的刚度、安全带织带伸长率、乘坐摩擦系数等参数的影响和重要程度;对如何设计符合HIC要求的经济舱头排旅客座椅和壁板提出了建议。     

“心经”“妙法”铸金牌——航天推进技术研究院研制高质量火箭发动机纪实

神舟九号任务发动机的研制,是在充分继承已有成熟技术基础上进行的。开展可靠性增长设计和适应性改进,既要载人,又要交会对接,是一个需要运用合理科学的可靠性试验方法。经过改进-试验-再改进-再试验的反复过程,打造出质量过硬的高可靠性发动机,具有前所未有的极大难度。     

用于可重构机床控制系统的电力线通信技术

介绍了可重构机床对通信系统的要求,提出了一种基于宽带电力线通信(PLC,Power Line Communication)技术的新型通信系统.通过对机床电力线的信道特性和噪声频谱的分析与测量,选定了通信系统的载波频率和带宽等参数.为了对抗电力线信道的多径效应,提高频谱利用率,实现可靠高效的数据传输,采用正交频分复用技术(OFDM,OrthogonalFrequency Division Multiplex)作为调制解调方式.开发了PLC调制解调器,定义了物理层帧结构.最后以机床主轴伺服系统为例对该通信系统进行了实验验证.实验结果表明,该系统实现了有效数据传输率10 Mbit/s,误比特率(BER,Bit Error Rate)小于10-8的高效数据传输.     

环形水射流流场的实验研究与统计分析

在11、12和15MPa射流压力下对环形自由水射流流场进行实验研究,以获得该射流场的能量特征与液滴尺寸分布规律。运用相位多普勒粒子测速（PDPA）技术对射流流场中的速度分布和液滴粒径分布进行测量,并对通过不同位置控制体的单个液滴行为进行了统计分析。研究表明：环形射流流束中心存在着较宽的高速区域,且射流能量沿着射流方向衰减缓慢;距离喷嘴的轴向距离越大,射流横断面上的速度与液滴粒径分布越平坦;射流压力对流束中心的轴向速度变化影响较大,对液滴粒径分布的影响不明显;射流流束中心区的湍流脉动较弱,但通过位于射流中心位置的控制体的液滴粒径谱较宽。     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.