对广西水资源生态补偿机制的思考

通过对广西水资源污染状况的分析,结合国内外进行生态补偿的实践经验,提出对水资源生态补偿机制的设计、健全水资源生态补偿相关法律法规等五方面的措施,构建和完善广西水资源生态补偿机制。     

J2级经纬仪竖盘指标自动补偿误差不确定度

介绍了按照ＪＪＧ４１４—９４《光学经纬仪》检定、校准Ｊ２级经纬仪竖盘指标自动补偿误差时，依据“’９３国际指南”要求，对其测量不确定度进行的分析、计算。     

某型发动机起动T4超温故障诊断

针对某型发动机在试车起动过程中T4超出规定限制值的故障,从工作机理上进行了研究,并详细分析了其故障原因,形成排除故障树.     

空间辐射环境危害综合监测原理样机研制

依据空间辐射环境的分布特性及具体空间辐射效应的特征判据,设计出多功能、模块化的航天器空间环境危害监测样机。该样机可针对不同运行轨道辐射环境采用不同的探测模块组合,能够实现单粒子效应、总剂量效应、位移损伤效应、表面充电效应和深层充电效应等辐射危害的综合监测,且具有高集成、低功耗的特性,可为卫星平台提供有效的辐射危害实时监测告警和故障诊断支持。     

一种同轴腔温漂问题的仿真

文章在三维仿真软件HFSS和CST中建立谐振腔模型，给出建模的原理和注意点；详细研究了腔体各尺寸随温度变化对腔体本征频率的影响的正负性及影响大小，得出引起腔体频率变化的主要结构因素；重点分析了调谐螺钉纵向扰动及径向扰动对谐振频率的影响。结合LC谐振电路对结果进行分析，得出减小温漂的措施。并根据仿真结果，对腔体的各个部分合理使用不同材料，使腔体温漂得到补偿。     

基于BMU/LVDS总线的闭环总检查测试技术研究

为了更好地满足控制系统总检查测试的有效性和覆盖性要求,本文提出了火箭控制系统总检查的闭环测试方案。同时,新一代运载火箭所采用的总线监控单元BMU和箭地高速串行总线LVDS等新技术使方案的实现成为了可能。本文先介绍和论述了方案提出的必要性、原理以及实现的技术支持;接着提出了几点闭环实现的设计思路;最后在某型号火箭控制系统综合实验的基础上搭建了闭环测试平台,对惯组的有效性以及迭代制导算法的适应性进行了系统级的验证,实验表明方案能够很好地满足地面测试的有效性和覆盖性。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.