锌层活化法的应用

本文说明了锌层活化法的原理和应用。     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

To improve performances of multi-objective optimization algorithms, such as convergence and diversity, a hybridization- encouraged mechanism is proposed and realized in elitist nondominated sorting genetic algorithm （NSGA-Ⅱ）. This mechanism uses the normalized distance to evaluate the difference among genes in a population. Three possible modes of crossover operators--＂Max Distance＂, ＂Min-Max Distance＂, and ＂Neighboring-Max＂--are suggested and analyzed. The mode of ＂Neighboring-Max＂, which not only takes advantage of hybridization but also improves the distribution of the population near Pareto optimal front, is chosen and used in NSGA-Ⅱ on the basis of hybridization-encouraged mechanism （short for HEM-based NSGA-Ⅱ）. To prove the HEM-based algorithm, several problems are studied by using standard NSGA-Ⅱ and the presented method. Different evaluation criteria are also used to judge these algorithms in terms of distribution of solutions, convergence, diversity, and quality of solutions. The numerical results indicate that the application of hybridization-encouraged mechanism could effectively improve the performances of genetic algorithm. Finally, as an example in engineering practices, the presented method is used to design a longitudinal flight control system, which demonstrates the obtainability of a reasonable and correct Pareto front.     

针栓式喷注单元膜束撞击雾化混合过程数值模拟

为了全面认识针栓式喷注器喷雾场结构，基于自适应网格加密技术和分三相计算的PLIC VOF（Piecewise Linear Interface Calculation Volume of Fluid）方法对针栓式喷注单元膜束撞击雾化混合过程进行了仿真分析，通过对两路推进剂分别进行界面追踪，获得了膜束撞击雾化混合过程的详细结构特征，与高速摄影试验结果定性定量对比均吻合较好，验证了数值方法的准确性。以此为基础对膜束撞击的喷雾场结构、撞击变形过程、流场涡结构、雾化破碎典型特征及破碎后的雾化混合分布特征进行了识别分析，结果表明：膜束撞击形成了液束未穿透液膜和液束穿透液膜2种不同的喷雾扇结构。膜束撞击形成的喷雾扇呈"Ω"形，膜束同时发生弯曲变形和横截面变形。另外，膜束撞击同时受到正压和剪切应力作用，导致了一系列复杂涡流现象，使得相互作用增强，雾化混合均增强，这也是膜束撞击喷注构型优于膜膜撞击的本质原因。最后，还发现膜束撞击喷雾场液滴分布呈现分区结构特征，分别是液束控制主导的上雾化区、液膜控制主导的下雾化区及夹在中间的混合区，实际中应兼顾雾化特性和混合特性，选取中等动量比膜束撞击，这可为针栓式喷注器的理论研究和工程设计提供重要参考。     

卷首语

为有效实施航天工程管理,确保多型号并举的研制任务一次成功,中国航天科技集团公司在吸收国外相关实践和研究成果的基础上,针对宇航产品小子样研制特点,系统地提出了航天产品工程。经过几年的探索和实践,产品工程作为一项提升各单位研制生产能力、提高型号保障水平的综合性工程技术已经在各单位取得了共识,并且在实际工作中取得了实质性进展。2011年9月22日至10月     

开口风洞声阵列测量的剪切层修正方法

开口风洞中的相位传声器阵列测量，必须进行剪切层修正才能得到真实的噪声源位置信息。在0.55m×0.40m声学风洞中开展了剪切层修正的实验研究，得到了不同风速条件下的剪切层速度剖面、声波传播延迟时间和声源定位的结果。根据实验结果，对剪切层速度剖面的Gortler理论解进行了验证，并对比分析了4种剪切层修正方法。研究结果表明:选择自相似参数σ=9，ξ₀=0.2时剪切层速度剖面测量值与理论值符合较好；剪切层厚度与轴向距离的关系为y=0.15x；马赫数Ma≤0.3、测量角θ_m在40°~140°范围内，不同剪切层修正方法对声波延迟时间计算结果的相对误差在1%以内。提出了射线追踪快速计算方法，该方法较常规射线追踪法的计算速度可提高2个数量级，从而使其适用于声阵列在线测量。     

金属多层膜超晶格结构研究

用高分辨的三晶体x—射线衍射仪测量了Zr、Cu金属交替的多层膜的x—射线小角反射谱。用扩展了的Born—wolf光学模型对Zr、Cu多层膜的x—射线小角反射数据进行了定量分析。结果表明，该金属多层膜在其生长方向具有超晶格结构。在两层金属膜之间的界面上，由于内扩散，形成了界面交混层，它使x—射线小角反射所产生的高阶Bragg峰的强度减弱。由于两种金属膜的晶格不匹配，使高阶Bragg峰加宽。界面的粗糙度可用来模拟x—射线小角反射曲线的阻尼振荡效应。     

资源三号卫星廊坊地区遥感数据的融合处理

本文以资源三号卫星河北省廊坊地区2A级全色遥感影像和多光谱影像数据为基础,采用遥感数字图像处理软件ERDASIMAGINE进行了研究区域的提取,并对提取的感兴趣区进行了几何校正,即图像配准处理,然后进行了融合处理,分别采用了空间增强的分辨率融合算法、改进IHS分辨率融合算法以及小波分辨率融合算法,通过和融合前的影像进行对比,融合后的影像既保留了多光谱影像的丰富的波谱信息,同时具有了全色影像的高空间分辨率的特征,最后对比三种融合算法,得出改进的IHS分辨率融合算法效果最佳。     

甚小型卫星发展综述

介绍了立方星(CubeSat)、片上卫星(SpaceChip)、印制电路板卫星(PCBSat)、多芯片组件卫星(MCMSat)4种甚小型卫星的发展情况和技术特点。CubeSat技术最为成熟,已发射多颗此类卫星,但体积固定,成本较高;SpaceChip是卫星小型化的最终目标,它成本最低,集成度最高,体积最小,但通信距离较短;PCBSat的成本和性能居中,设计复杂度低,且元器件有商用现货供应,但功耗较大;MCMSat综合了PCBSat和SpaceChip的技术特点,技术复杂。我国甚小型卫星可选择优先发展PCBSat;重点突破商用现货元器件的筛选,以及空间应用技术、一体化姿态控制技术、新型微推进技术、轻型高效的蓄电池和太阳电池技术等。