改进PointNetLK的点云智能配准与位姿图优化方法

针对空间在轨服务任务中的非合作目标相对位姿测量问题,提出一种目标可测部位点云的智能配准方法。首先,通过Straight Through滤波算法对半物理仿真平台采集得到的点云进行目标提取,以消除背景数据等杂乱信息;其次,改进PointNetLK神经网络点云配准算法,将提取后的点云数据作为输入,从而获得初步配准结果,解决非合作目标先验信息缺失导致的无法配准问题;最后,建立基于位姿图的优化模型,以降低配准误差,提高配准精度。实验结果表明,与传统迭代最近点(ICP)算法相比,配准综合误差从6.3598降低到1.7291,精度提高约 72.81% 单次耗时从33.16 s降低到4.2 s,效率提升约87.33%,与当前SM ICP等其他算法相比,也具有一定的优势。     

基于左手材料的翼面隐身结构设计及优化

翼面隐身结构能同时满足飞行器机翼气动、结构和隐身的要求,但在空间有限的机翼中应用时,由于结构特点使其隐身效果受到限制。为了解决该问题,在传统隐身结构中加入左手材料(LHM)进行改进。首先选取一种典型的LHM,从隐身设计角度出发,利用其雷达散射截面(RCS)计算不同入射角度下的后向吸收率,对其电磁特性进行研究。然后根据LHM的电磁特性,将其应用于翼面隐身结构,在相同的RCS减缩效果下,应用LHM可有效降低隐身结构体积。最后,为了进一步提高隐身效果,提出一种夹芯型LHM翼面隐身结构,并对该隐身结构中的结构参数利用代理模型进行优化。研究结果表明,相较金属翼面段RCS降低了15dB以上,较相同结构的翼面隐身结构RCS降低了10dB以上。     

A strategic flight conflict avoidance approach based on a memetic algorithm

Conflict avoidance （CA） plays a crucial role in guaranteeing the airspace safety. The cur- rent approaches, mostly focusing on a short-term situation which eliminates conflicts via local adjust- ment, cannot provide a global solution. Recently, long-term conflict avoidance approaches, which are proposed to provide solutions via strategically planning traffic flow from a global view, have attracted more attentions. With consideration of the situation in China, there are thousands of flights per day and the air route network is large and complex, which makes the long-term problem to be a large-scale combinatorial optimization problem with complex constraints. To minimize the risk of premature convergence being faced by current approaches and obtain higher quality solutions, in this work, we present an effective strategic framework based on a memetic algorithm （MA）, which can markedly improve search capability via a combination of population-based global search and local improve- ments made by individuals. In addition, a specially designed local search operator and an adaptive local search frequency strategy are proposed to improve the solution quality. Furthermore, a fast genetic algorithm （GA） is presented as the global optimization method. Empirical studies using real traffic data of the Chinese air route network and daily flight plans show that our approach outper- formed the existing approaches including the GA .based approach and the cooperative coevolution based approach as well as some well-known memetic algorithm based approaches.     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

扩压叶栅最佳弯叶片生成线与进口马赫数之间的关系

为了研究扩压叶栅最佳弯叶片生成线与叶栅进口马赫数之间的关系,用优化的方法,在八个不同进口马赫数下对弯叶片生成线(积叠线)的弯角和弯高进行优化,优化的目标函数为叶栅总压损失系数。结果表明:在同一弯角下,弯叶片总压损失系数随弯高的增大而减小,弯高为50%时总压损失系数最小,最佳弯叶片生成线的弯高为50%。在同一弯高下,总压损失系数随弯角增大呈现类似抛物线的形式的变化规律,存在着一个最佳弯角使总压损失系数最小。在不同进口马赫数下,最佳弯角随着进口马赫数的增加而增大,通过三次多项式曲线拟合得到了一个相对准确的最佳弯角与进口马赫数之间的关系。     

民用飞机生产线自动控制系统的信息安全问题探析

随着信息化技术越来越多地应用到工业控制系统,不可避免地也带来了各类风险和威胁,系统的信息安全问题也就越发需要引起重视。对民用飞机生产线自动化控制系统存在的安全隐患进行了探究和分析,结合其他领域的工控系统安全措施,针对本系统的一些威胁和漏洞提出了安全风险防范方案。     

基于主动失谐优化的叶轮瞬态加减速振动抑制

提出了一种基于主动失谐优化的叶轮瞬态加减速振动抑制方法.首先建立了瞬态加减速激励下的叶轮降阶模型,获得了表征失谐对瞬态振幅影响的失谐放大因子.然后基于降阶模型,采用蒙特卡洛仿真快速计算了一系列瞬态激励下失谐放大因子的概率密度分布,结果表明:失谐放大因子在大多数瞬态激励下受到随机小失谐的影响大于在稳态激励下受到的影响,且...     

STK三维模型制作与优化方法研究

为建立逼真的三维模型,在STK(卫星工具包)软件中进行任务仿真,讨论了直接获取mdl格式模型、编写mdl文件、转换模型等3种STK模型制作方法,并对这几种制作方法的优缺点进行了分析。针对不同制作方法带来的模型问题,重点探讨了组件层次调整、形状修改、显示效果优化、动作关节优化、特效设置等5种mdl格式模型优化方法。通过实例说明5种优化方法的优化效果,结果表明相关方法能有效地优化模型。     

PC级实时仿真系统的几种实现方案

本文较为详尽地介绍了基于PC级硬件平台的控制系统实时仿真系统的几种实现方案，通过这些方案的有机组合可以形成不同档次，不同需求的实时仿真系统。     

地下原油无缆电加热系统可靠性措施的计算机仿真与优化 …

本文根据给定的油井地质资料，用计算机对其进行拟合再现，着重讨论了井下原油无缆电加热系统的可靠性措施及其计算机仿真与优化决策方法。