热处理对9 Cr13 Mo3 Co3 Nb2 V组织与硬度的影响

采用金相分析、硬度测试等技术手段,研究热处理对马氏体不锈钢9Cr13Mo3Co3Nb2V组织和硬度的影响。结果表明：9Cr13Mo3Co3Nb2V经淬火、冰冷处理及多次回火后,残余奥氏体充分转变为回火马氏体,并产生较强的二次硬化效果,进而获得稳定的组织和高的硬度;在350℃以上回火时,由于组织中二次碳化物的析出,开始出现二次硬化倾向,至480~520℃时,回火硬度达到了最大值。     

Ti2AlNb合金双层辉光等离子表面渗钼的扩散行为研究

Ti2AlNb合金(O相)具有高的比强度、断裂韧性以及优良的抗蠕变性能,因而在航空制造中成为一种颇具吸引力的高温结构材料.但是,较差的耐磨性是其主要的缺陷并限制其实际应用.为解决这一问题,对Ti2AlNb合金进行双层辉光等离子表面渗Mo.探讨主要工艺参数对Mo的扩散行为的影响.采用扫描电镜(SEM)、X射线衍射(XRD)和辉光放电光谱仪(GDS)分析表面合金化层的成分分布和微观结构.测定从表面到中心的显微硬度变化曲线.结果表明温度与时间均对扩散过程具有显著的影响.最后通过回归分析计算出在优化的工艺温度980℃下的扩散系数.     

Preparation and Microstructure of Cu/Ti_3SiC_2 Nanocomposite

Mixed micron-sized Cu/Ti3SiC2 (vol5%) powder was mechanically milled using agate balls and zirconia balls separately. Then followed an examination of it with the FEI-SEM. The experimental results show that, distributed homogenously in Cu matrix, the Ti3SiC2 particles have a size of about 30-50 nm after milled with agate balls for 8 h, while it remains approximately unchanged after milled with zirconia balls. The microstructure of the mixture at different ball-milling stages was also studied. Bulks of Cu/Ti3SiC2 nano-composite were fabricated by hot pressing nano-sized Cu/Ti3SiC2 powder at the temperature of 1 073 K under 100 MPa. Then came an investigation of the effects of the particle size and agglomerate state of Ti3SiC2 as well as the microstructure of Cu/Ti3SiC2 nano-composite. It was found that the nano-sized Ti3SiC2 particles distribute evenly in copper.     

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl^- ion concentrations. The results demonstrate that the Cl^- ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples passivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those passivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti：Ni = 9.01：1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.     

不同制备工艺对MoSi2涂层抗氧化性能的影响

为解决MoSi2和SiC线膨胀系数差异,在带有SiC外涂层的C/C复合材料表面采用等离子喷涂、电弧沉积和固渗等工艺制备MoSi2涂层。涂层表面形貌分析发现,等离子喷涂MoSi2涂层多孔不致密,电弧沉积MoSi2涂层易开裂剥落;而固渗MoSi2涂层致密均匀,且界面结合力好。氧化试验也表明,固渗MoSi2涂层性能较好。     

Ti2AlNb基合金的研究进展

着重介绍了Ti2AlNb基合金的成分、显微组织及性能，综述了合金元素及热处理工艺对Ti2Al-Nb基合金组织性能的影响，介绍了Ti2AlNb基合金熔炼凝固特性，并展望Ti2AlNb基合金的未来。     

La2O3对Li2O-Al2O3-SiO2系统微晶玻璃性能的影响

以丙烯酰胺、N，N’-亚甲基双丙烯酰胺、碳酸锂、硝酸铝和正硅酸乙酯为原料，采用丙烯酰胺凝胶法成功地制备出多组分氧化物Li2O-Al2O3-SiO2（LAS）微晶玻璃超微粉末，并掺杂了稀土氧化物La2O3。将粉体压制烧结得到微晶玻璃块体。用IR，XRD，SEM等测试手段研究了掺杂对微晶玻璃组织与性能的影响，测定了微晶玻璃的热膨胀系数。实验表明：La2O3的加入使微晶玻璃的相变温度降低到900℃；掺杂后微晶玻璃的粒径减小；丙烯酰胺凝胶法制备的Li2O-Al2O3-SiO2（LAS）微晶玻璃热膨胀系数达到10^2数量级，掺La2O3，使Li2O-Al2O3-SiO2（LAS）微晶玻璃的热膨胀系数增大。     

Hf和Zr在高温材料中作用机理研究

在高温合金中,元素Hf和Zr可以促进γ γ′共晶、MC(2)碳化物、M2SC碳硫化物和Ni5M相的形成,改变草书状MC和M3B2成为块状并且通过净化晶界或枝晶间自由态的S来提高这些薄弱部位的结合强度,从而延迟裂纹的形成和扩展.Hf和Zr可提高铸造高温合金室温拉伸和中温持久的强度和塑性.Hf,Zr抑制次生碳化物M23C6和M6C的生成,从而提高了合金在高温长时热暴露时的显微组织稳定性.Hf,Zr降低合金的初熔温度,Ni5Hf和Ni5Zr相的初熔被认为是Hf,Zr影响初熔的主要原因.通过1150℃/8h的预处理,Ni5Hf以Ni5Hf γ(C)→MC(2) γ反应或者固溶两种方式被消除.元素Hf可以缩小枝晶间失去毛细管补缩能力和固相线之间的温度范围,还能降低枝晶间液池沟通所需的液体量.在凝固后期枝晶间的富Hf熔体具有很好的流动性、浸润性和趋肤效应,这些都是降低合金热裂倾向、提高合金可铸性和焊接性能的有利因素.具有高的化学活性的富Hf液膜容易在铸件表面形成Hf2O薄层.Hf和Zr是钎焊用中间层合金的降熔点元素.根据凝固过程中富Hf,Zr熔体的成分最终发展出Ni-18.6Co-4.5Cr-4.7W-25.6Hf和Ni-10Co-8Cr-4W-13Zr两种中间层合金,使单晶高温合金的无Si、B连接成为现实.还发展出了定向凝固片状Ni3Al/Ni7Hf2共晶合金,成分为Ni-5.8Al-32Hf和Ni-4Al-26Hf-8Cr-4W.Ni-5.8Al-32Hf合金的最佳凝固条件为温度梯度G=250℃·cm-1和凝固生长速率R=5μm·s-1;Ni-4Al-26Hf-8Cr-4W,凝固条件为G=350℃·cm-1和R=1μm·s-1.     

超硬不锈钢9Cr13Ni6Co5Be回火组织与硬度研究

研究超硬不锈钢9Cr13Ni6Co5Be回火组织特征和性能特点.结果表明,9Cr13Ni6Co5Be钢在470℃回火析出金属间化合物Be2Fe,导致材料在室温具有高于HRC66的硬度.分析强化相析出规律,确定Be2Fe与马氏体基体的位向关系为((-1)10)M//((-2)10)Be2Fe,[112]M//[241]Be2Fe.该钢具有良好的高温硬度,300℃硬度HRC＞64,500℃硬度HRC＞58.     

新型TMC-2复合材料叶片小余量锻造工艺研究

研究了新型TMC-2复合材料的叶片小余量锻造工艺。结果表明,采用小余量锻造工艺研制的叶片锻件组织均匀,金属变形流线分布合理,因而,叶片的疲劳性能和抗腐蚀能力得到提高,同时,使用寿命得以延长。采用TMC-2复合材料研制的小余量叶片,在高温下具有优良的蠕变和热稳定性能。