资源卫星数据收集系统及其应用

简要说明了资源卫星数据收集系统(DCS)的原理、组成和特点,在对分布范围广、参数缓变和传输速率低的数据进行采集方面,资源卫星DCS具有很大的优势和很高的利用价值。结合环保监测应用的需求,对资源卫星DCS应用系统方案进行了详细设计。     

基于DSP和FPGA的GPS伪随机码并行快速捕获方案设计

讨论了高动态下GPS伪随机码并行搜索的基本原理,以及自适应门限确定方法与搜索过程中应注意的问题。提出了一种基于高速DSP和FPGA的全数字解扩接收机方案,阐述了工作流程,并给出了系统的结构框图,经测试验证实现了伪随机码并行快速捕获的功能。     

进场着陆飞行品质的地面试验研究

针对电传控制增稳飞机进行了进场着陆的飞行品质地面模拟试验研究，验证了适合于进场着陆的控制律，并得出一些重要的有关进场着陆的驾驶员评定意见。此外，还计算了轨迹角超调值，验证了该参数数可以作为一个重要的飞行品质准则。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Neural adaptive control for a ground experiment of the space proximity operation in a six-degree-of-freedom micro-gravity simulation system

In this study, a neural adaptive controller is developed for a ground experiment with a spacecraft proximity operation. As the water resistance in the experiment is highly nonlinear and can significantly affect the fidelity of the ground experiment, the water resistance must be estimated accurately and compensated using an active force online. For this problem, a novel control algorithm combined with Chebyshev Neural Networks (CNN) and an Active Disturbance Rejection Control (ADRC) is proposed. Specifically, the CNN algorithm is used to estimate the water resistance. The advantage of the CNN estimation is that the coefficients of the approximation can be adaptively changed to minimize the estimation error. Combined with the ADRC algorithm, the total disturbance is compensated in the experiment to improve the fidelity. The dynamic model of the spacecraft proximity maneuver in the experiment is established. The ground experiment of the proximity maneuver that considers an obstacle is provided to verify the efficiency of the proposed controller. The results demonstrate that the proposed method outperforms the pure ADRC method and can achieve close-to-real-time performance for the spacecraft proximity maneuver.     

卫星通信地球站站址勘测的研究

介绍了卫星通信地球站站址勘测技术要求;讨论了方位角与俯仰角计算,微波干扰电平允许值计算,微波干扰测试以及发射协调距离的估算;从而得出建站最必要的技术结论。     

三层壁喷管的不稳定导热

文章介绍了固体火箭发动机三层壁喷管的不稳定导热的计算方法,导出壁面温度分布规律和各层壁温的计算公式,并指出工作时间与内表面壁温和影响喷管烧蚀的关系。     

树脂基碳纤维复合材料的热物理性能之一——导热系数

本文讨论了树脂基碳纤维复合材料热导与各种纤维体积含量V_f及温度的关系,研究了树脂基碳纤维复合材料的传热机理,并给出了大量的导热系数数据。     

碳基复合相变装置及在大热耗单机温控中的应用

碳基复合相变装置以高导热碳基复合相变材料为主要储能和导热载体,利用高导热膨胀石墨强化导热,运用相变材料的潜热实现热量的削峰填谷,可有效抑制短时大热耗单机的温升,减少单机非工作时段所需的补偿功耗,节省卫星的重量资源和功耗资源。主要介绍了一种高导热碳基复合相变装置,结合复合相变装置与卫星结构板优化的综合散热系统,用于解决星载短时工作的大热耗单机温度控制问题。通过理论计算与热仿真分析相结合,对复合相变装置进行了优化设计;通过开展专项试验对复合相变装置的热性能和空间环境适应性进行了充分验证;并在整星真空热平衡试验中,验证了复合相变装置对大热耗单机的温度控制效果。     

任意转角石英晶片电弹常数的快速计算

电弹常数是描述压电材料最重要的常数,压电元器件的设计以其所用压电材料的电弹常数为基础。石英晶体是目前应用最广的压电材料,由于晶体的各向异性,其电弹常数的值随品片的切割方位而变,且通常须用矩阵表示。因此,任意切型和切角的电弹常数计算就变得非常复杂。本文对任意切型的电弹常数归纳了一种简便的计算方法并在微机上编出了相应的程序。通过运行本文工作的程序,即可随时得到任意切型及切角电弹常数的理论值,这样就可为研制和设计工作提洪可靠的理论依据,并节省大量的人工计算时间。