7一种双S形进气道流场特性殛控制的试验研究

In order to provide the line of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle(UCAV), a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribut ion measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators (VGs) is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate: (1) Compared with the baseline serpentine design without flow control the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion (

) decreases from 11. 7% to 2.3% by using the VGs. (2) With the descent of the free stream Mach number the total pressure loss decreases. How ever, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. (3) When Ma₀=0.6-0.8, α= −4°-8° and β= 0°-6°, the total pressure recovery varies between 0.936 and 0.961, the circular total pressure distortion coefficient varies between 1.4% and 5.4% and the synthesis distortion coefficient has a ranges from 3.8% to 7.0%. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.     

Time delay compensation in lateral-directional flight control systems at high angles of attack

The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack. In this investigation, the effects of time delay on the lateral-directional stability augmentation system in high-α regime are discussed based on the $\dot{\beta }$ model, which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateral-directional unsteady aerodynamic characteristics at high angles of attack. Both the $\dot{\beta }$ model and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-α maneuvers. The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay. Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based on $\dot{\beta }$ model are designed to address the time delay in different maneuvers. The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack. Finally, the gain-prediction compensator is combined with a linearized $\dot{\beta }$ model reference adaptive controller to compensate the adverse effects of very large time delay, which exhibits excellent performance when addressing the extreme conditions at high angles of attack.     

燃烧室电火花点火模型

为了准确掌握影响航空发动机燃烧室点火边界的关键因素,并建立燃烧室点火边界预测模型,对单头部燃烧室的点火过程及点火边界进行了试验与理论研究.获取了燃烧室点火过程的火核生成与传播特性曲线,形成了拓宽燃烧室点火边界的优化方法,基于点火恢复时间建立了燃烧室点火边界预测模型,并对预测模型的精度进行验证.结果表明:提高喷嘴雾化性能...     

激波管中测量JP-10点火延时的吸附问题研究

在JP-10点火延时的激波管实验中,JP-10在激波管壁的吸附导致气相浓度的不确定是测量结果分散的主要原因之一.利用精确测定的吸附曲线确定了实验时JP-10真实的气相浓度,解决了高碳数碳氢燃料点火延时激波管实验时管壁吸附影响燃料气相浓度确定的困难.实验显示JP-10的吸附符合Langmuir吸附等温关系.     

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

数据融合的对流层天顶延迟估计方法

为提高对流层天顶延迟(Zenith tropospheric delay，ZTD)的估计性能，提出了基于数据融合的ZTD估计方法。估计干延迟采用Saastamoinen模型，估计湿延迟采用Askne模型，地表气象测量设备提供给两模型所需的气压、温度以及水汽压，Askne模型所需的加权温度、温度变化率和湿度变化率由全球气压和温度2w(Global pressure and temperature 2w，GPT2w)模型提供。当气象测量设备不可用时，上述所有气象参数均来自于GPT2w模型。利用国际GPS服务(International GPS service, IGS)提供的数据进行验证，结果表明：当地表测量设备存在时，所提方法较Saastamoinen模型提高了8mm；当全部气象参数来自GPT2w时，本方法较GPT2w+Saastamoinen模型提高了8.1mm；对于季节分明的测站，误差趋势同样具备季节性；对于海拔高和气候干燥的的测站，估计误差较小。     

中继卫星系统仿真软件设计与应用*

设计开发中继卫星系统仿真软件,并针对理想信道条件、I/Q幅相不平衡、幅频特性、群时延、相位噪声、功放饱和条件、非线性信道条件这七种信道,仿真16QAM和16APSK的误码率性能,并对仿真结果进行分析。利用仿真平台得出的非线性信道条件下误码率需求与所需信噪比之间的关系,可以作为完善系统技术指标的重要依据,为中继卫星系统后续建设和应用提供重要参考。     

内反射红外光谱在污染物成分测试中的应用

介绍了内反射光谱的原理及其在放气沉积污染物成分测试中的应用。     

神经网络在逆变器控制中的应用

针对传统的基于最优消谐波理论的逆变器 ,应用了一种全新的神经网络控制器。当系统工作时 ,由在线神经网络实时调节逆变器输出电压的大小 ;同时各功率管的开关角由另一个神经网络通过对最优 PWM最优开关角的拟合 ,直接计算出来。整个控制系统具有结构简单、反应灵敏、调压精确、输出电能质量高且全数字化的特点。     

亚、跨、超音速风洞控制系统

利用ＰＣ总线工业控制计算机及有关功能组件，组成ＨＧ－４亚、跨、超音速风洞控制系统，实现超音速总压Ｐ０及亚、跨音速马赫数Ｍ自动调节，进一步提高吹风过程自动化。