《电子电路实践》课程的教学研究与实践——基于工作过程导向的理论与实践融合互动教、学、做一体化

本文结合《电子电路实践》课程教学实践,通过课程体系的重构,教学场所时间与空间结构的整合、理论与实践的融合互动,对融“教、学、做”一体,以学生为中心,以培养学生的专业能力、方法能力和社会能力为目的的教学模式进行探索性的设计与实施.     

某圆周缝型救生伞的充气性能研究

为获得新型圆周缝结构救生伞的充气性能,文章采用任意拉格朗日欧拉流固耦合方法对该救生伞进行了充气过程的数值模拟,用空投试验结果验证了该数值方法的可行性。数值结果得到了绕伞衣流场、伞衣外形、运动的动态信息,对数值结果的分析发现初始充气阶段后期流场对上部伞衣影响很大,为充气过程中上部伞衣的控制提供了依据,但是初始充气期救生伞的摆动角度小于充满期。对于结构透气量不对称设计的伞衣,不对称充气是绝对的,圆周缝会首先在结构透气量少的部位张开。结果表明,对不同的圆周缝节点设计不同的开缝力将有助于保持良好的对称充气状态,改变开缝力的设计参数将会改变圆周缝的开缝时间及圆周缝完全张开所需的时长,将达到更好的减载效果。研究结果对圆周缝型降落伞的优化设计有一定的参考作用。     

用于BVI噪声试验的新型涡发生器设计与分析

针对直升机特有的旋翼桨/涡干扰(Blade vortex interaction,BVI)噪声计算精度低且试验数据缺乏问题,也为了开展旋翼气动噪声特性分离方法的验证试验研究,本文设计了一种能够用于BVI噪声试验的新型多段翼型组合式涡发生器。首先通过CATIA软件建立涡发生器出口端翼型段在不同迎角下的试验模型,再使用FLUENT软件建立涡发生器的流场仿真计算模型,比较分析了不同翼型段迎角下的涡流流场。随后用粒子图像测速法(Particle image velocimetry,PIV)技术系统测量了不同翼型段迎角、距离涡发生器出口端的长度及流速等参数变化下的涡流流场,对不同试验状态下的涡核、涡强等参数进行了对比分析。针对涡量偏弱的缺点,对传统单级涡发生器进行了改进,设计研发了双级涡发生段。试验证明其能产生更强且稳定的涡,为BVI噪声试验提供了模拟的桨尖涡,试验结果表明了涡发生器的有效性。     

倾转旋翼机小速度前飞的尾迹涡演化及其对平尾的影响

采用基于运动嵌套网格的CFD方法计算了倾转旋翼机直升机状态和过渡状态下的流场,研究了在小速度前飞下的尾迹涡演化和其对平尾气动力的影响。直升机状态下,前飞速度≤4 m/s时,旋翼尾迹主要在机翼附近,与机翼干扰形成喷泉效应,但对平尾无影响。随着前飞速度增大,喷泉效应与自由来流的综合作用形成喷泉涡,喷泉涡产生于机翼上表面,呈流向涡形式向下游输运,从平尾上方通过。前飞速度进一步增大（≥16 m/s）,产生于桨盘边缘的旋翼尾迹侧缘涡开始增强,从平尾侧边通过,并在平尾附近的流动中占据主导地位。喷泉涡和侧缘涡均在平尾处产生上洗流动,使平尾产生低头力矩。从直升机状态到固定翼状态,旋翼尾迹侧缘涡逐渐减弱,对平尾的影响也减弱。     

前向数据接入方式对导航星座网络通信性能的影响分析

对采用时分多址轮询建链体制的导航星座星间链路网络,为了指导星间链路网络地面前向数据接入的应用,分析了不同地面前向数据接入方式的星-星-地联合数据交互机制及其对网络通信性能的影响,并结合应用代价给出了综合评价和使用建议.以前向数据最快路径接入方式和固定节点接入方式为代表,分析了星间链路网络与地面间星-星-地联合数据交互机...     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

基于多Agent的机群编队导航系统设计与研究

智能化建模在装备作战仿真领域中独居优势.将多Agent技术程序设计方法引入机群编队导航系统的设计中,对模型进行了顶层设计并分析了Agent子系统之间的信息交互过程,为机群编队导航系统的研发和设计提供了新的思路.     

水气动量交换的实验研究

在风浪槽中进行水气动量交换实验，测量了不同风速和风区下的波浪及空气湍流流场。测量数据表明水面上风速分布符合对数律，水气界面附近在小范围的动量交换常通量层。阻力系数ＣＤ随风速增加线性增长，随波龄增加而减小。这一趋向与理论分析及外海帝测结果一致。对风浪发展过程中波浪和空气湍流谱结构的分析证明了水气运动的耦合关系。     

中国核电厂操作员反应时认知模型的应用(英文)

讨论了一些有关人员行为与时间有依赖关系的可靠性模型；给出了中国核电厂操作员在清华大学培训模型机上的一些可靠性实验结果。此外，还根据已获得的实验数据计算了在ＡＴＷＳ事故条件下人的失误概率。     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.