基于混合编程技术的AOCC应用软件快速仿真平台

介绍基于混合编程技术的AOCC应用软件的快速仿真平台的整体框架设计以及具体实现．基于该方法构建的快速仿真平台，能够满足软件开发人员对基于8086汇编语言开发的AOCC应用软件开、闭环调试和测试的要求，对提高软件的开发效率和保证软件的质量有积极意义．     

数字化组合式大力值校准系统的研制

为了满足对大力值(20 MN左右)的测量和校准,开发了一套数字化组合式大力值校准装置。其最大量程可达24 MN,系统测量准确度为0.1%,适合于大型材料试验机的校准和检定。本文详细介绍了装置的组成结构、弹性体设计、贴片和组桥方式、数字化的方法以及与计算机的通信实现。     

基于产学研模式的飞机机务维修实训平台建设

目的探索构建校内生产性实训基地;方法以飞机结构腐蚀与控制实训平台的建设为例;结果阐述校内实现以产学研相结合模式来进行实训平台建设;结论对其它机务维修专业课程的实训平台建设起到引导的作用。     

电子对抗有效载荷地面测试与评估技术

描述电子对抗有效载荷地面测试系统的设计内容,介绍了测试系统的主要组成、功能及测试工作原理,常有的测试项目、测试方法,载荷的数据整理、评估与分析等,为以后电子对抗载荷地面系统搭建提供参考借鉴作用。     

示波器输入电容对上限截止频率测量的影响

单管放大电路是模拟电路中的一个经典实验。通过这个实验,学生可以更好地掌握静态工作点的调整和测试方法,并通过测量放大电路的主要性能指标,体会静态工作点对动态特性的影响。实验电路的上限截止频率仿真值和实测值存在较大差异,本文针对这个问题进行了详细的分析,指出示波器的输入电容是引起差异的主要原因,并进一步讨论了可有的改进测试方法。     

三叉杆式万向联轴器采用调心轴承时的运动分析

分析了三叉杆式万向联轴器采用调心轴承时输出转角和输入转角之间的关系式,并得出这种联轴器为准等角速传动万向联轴器的结论;讨论了轴偏转角大小对输出输入转角差值的影响,分析表明,这种联轴器中转角差值的变化周期是输入轴自转周期的3倍。     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

亚跨超CFD软件平台研制

亚跨ＣＦＤ软件平台研制的宗旨是综合国内外计算流体动力学的最新研究成果，用计算机软件技术的新发展，建立一个面向对象的计算流体动力学的研究开发环境，加快计算流体动力学最新成果向工程应用的转换速度。本文介绍初级版本的研究进展和研究成果，主要匝数值网格生成技术，流场解算器，面向对象的界面设计等三部分组成。     

一种新型二元风洞侧壁干扰修正方法——当地修正法

针对现行总体型二元风洞侧壁干扰修正方法的不合理性，本文发展了一种新型修正方法——当地修正法，并就有关问题做了讨论。与目前的总体型方法相比，当地修正法致力于对模型当地流动参数的修正，而不是笼统地去调整试验条件。当地修正法有能力处理那些主要的侧壁边界层效应及相关问题，是未来开展侧壁干扰修正的一条有效途径。