内装式机载发射运载火箭分离方案分析

针对一种内装式投放发射方案，建立了机载发射运载火箭分离过程的数学模型。本发射方案尢需对运载火箭进行改动。数值仿真结果表明．火箭在点火时有较好的姿态，适用于发射现有的中、小型运载火箭。     

空调车出口风温的自动调节

空调车的出口风温是一个重要的调节参数。本文建立了空调车的出口风温自动化系统的模型。简述了热惯性较大的温度传感器模型在线辨识和动态补偿方法。根据实际工况，文章对控制系统的模型进行了抽象并简化为典型非线性控制系统。针对系统中使用的电机实际情况，文章又对系统最简模型的相轨迹运动状况进行了分析，同时给出了相轨迹图。     

飞行力学与飞行试验

阐述了新形势下飞行力学专业所面临的任务,强调了飞行力学与飞行试验密不可分的关系,分析了现阶段飞行力学,飞行试验研究中存在的问题,并提出了飞行力学专业近期急需研究的课题;最后,论述了《飞行力学》杂志在飞行力学与飞行试验研究中所起的作用和当前的工作方针。     

基于多学科综合的MAV鲁棒飞行控制器设计

气动、结构、推进和环境等学科设计参数变化与耦合对微型飞行器(MAV)性能影响明显，MAV飞行控制器设计应考虑这些因素。将MAV多学科模型集成在统一框架下，提出了基于各学科设计参数变化的线性化建模方法，研究了利用μ综合手段进行MAV飞行控制器设计的方法和步骤，并将此方法应用于某MAV纵向控制器的设计与评估中。     

欧洲返回舱CTV气动特性综述

研究分析了欧洲航天局天地往返运输系统之载人飞船返回舱CTV的气动特性，并与第一代联盟号飞船返回舱的气动特性作了对比研究。该返回舱为钝双锥外形，与联盟号飞船返回舱相比，它具有升阻比高、机动性强、稳定性好等特点。本文还对两类返回舱的气动热特性、防热材料重量、飞行弹道及通讯中断问题进行了对比分析研究。     

高空高速无人飞行器热控制系统设计

针对飞行时间短、速度和高度变化快、表面温度波动大的无人飞行器UAV(Unmanned Aerial Vehicles)热控制系统设计难题,提出了一种可解决实际工程问题的热分析计算方法.即把热天工况、冷天工况和标准天工况作为设计/试验工况;采用参考温度法、高超音速工程预测法或计算流体动力学CFD(Computational Fluid Dynamics)数值模拟法,确定了飞行器表面温度分布,并把其作为后续热分析数学模型的外边界条件;分析结构热容量对瞬态热载荷的影响,建立与之相应的边值问题方程,并采用有限差分法求解;根据高空高速飞行特点及瞬态热载荷值,确定仪器设备舱调温系统方案.     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

自动导引车在工业4.0 中的应用

随着工业4.0概念的逐步成熟,智能化工厂、智能化生产以及智能化物流将是未来很长一段时间的发展模式,传统的制造企业会面临智能化的升级和转型.在此背景下,从提高工业化生产自动化程度的角度入手,在生产流水线中引入自动导引车.然后针对每一种导航方式分析其优缺点,并且结合现代化生产方式的特点,通过对具体的应用案例进行分析,从原理上重点阐述了激光导引的情况,同时分析了自动导引车(AGV)的发展趋势,为企业后续在选择适合自身特点的自动导引车方面提供了参考.     

高超声速飞行器自适应神经网络容错控制

针对高超声速飞行器巡航段执行器控制效益损失故障和卡死故障问题,基于高超声速飞行器纵向运动模型,将自适应算法与改进的径向基函数神经网络(RBFNN)方法相结合,设计了一种自适应神经网络容错控制器。所提出的容错控制方法具有无需估计执行器故障值的优点,且设计的控制算法结构简单,无需大量实时计算,可以快速处理故障的发生,确保系统在参数不确定、恒定或时变执行器故障与卡死故障情况下仍具有稳定跟踪能力。最后,仿真验证了该方法的有效性。