低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

计算流体力学非结构混合网格高精度格式研究现状

介绍了航空CFD技术中的非结构混合网格高精度格式的基本理论和方法,国内外研究现状,几种非结构混合网格高精度格式。     

弹道跟踪数据野值剔除方法性能分析

弹道跟踪数据中的野值会影响导弹目标定位精度。对用于弹道跟踪数据的野值剔除方法进行了综述。结合事后和实时两大类处理模式,分析了各野值剔除方法在理论和工程应用上的优缺点,给出了实际应用时的限制因素,建立了野值判决准则和相应的野值剔除实现步骤。仿真结果表明:野值剔除方法可以有效提高弹道跟踪数据的精度。事后处理模式中,基于格拉布斯准则的野值剔除效果最佳;实时处理模式中,基于自适应门限的五点线性预报法野值剔除效果相对较好,且时间复杂度相对较低,适合实时处理。     

磁转速表指针摆动的故障分析

就磁转速表活动系统的动态特性以及在附加交变力矩的作用下，指针摆动随转速变化的规律，从理论上进行了分析，并结合实际探讨了指针摆动的故障原因。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.     

锚固站数量及布局对导航星座自主定轨影响分析

针对导航星座自主定轨中的星座整体旋转问题,采用增设少量地面锚固站的方法可有效解决该问题。通过推导星地距离对卫星轨道升交点赤经的偏导数,证明了星地距离对卫星轨道升交点赤经可观。仅考虑在我国大陆范围内布设锚固站的条件下,仿真分析了锚固站数量以及布局对导航星座自主定轨精度的影响。仿真实验结果表明:采用3个以上的锚固站,即可有效控制星座整体旋转,在14d的仿真时段内卫星自主定轨精度保持4m以内;锚固站数量越多,自主定轨精度越高,但随着锚固站数量的增加,自主定轨精度改善程度越来越小;在保持4个锚固站的情形下,采用不同的锚固站布局方案,自主定轨精度并无明显差别。     

某型导弹翼轴花键齿首齿机加工精度研究

就如何保证新一代导弹重要零件翼轴花键齿首齿位置精度达到±１０’的机加工技术作了详细的阐述，着重就花键齿插齿过程中的工装定位、首齿位置精度的提高和测量方法进行了较为认真的研究。实践证明，该种插齿工艺方法能保证翼轴零件首齿位置精度的互换性，在具有类似的首齿位置精度要求的齿轮加工行业中有一定的先进性，并具有借鉴和推广价值。     

A novel control method for turboshaft engine with variable rotor speed based on the Ngdot estimator through LQG/LTR and rotor predicted torque feedforward

In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed, a cascade PID control method based on the acceleration estimator of gas turbine speed (Ngdot) and rotor predicted torque feedforward is proposed. Firstly, a two-speed Dual Clutch Transmission (DCT) model is applied in the integrated rotor/turboshaft engine system to achieve variable rotor speed. Then, an online estimation method of Ngdot based on the Linear Quadratic Gaussian with Loop Transfer Recovery (LQG/LTR) is proposed for power turbine speed cascade control. Finally, according to the cascade PID controller based on Ngdot estimator, a rotor demanded torque predicted method based on the Min-batch Gradient Descent-Neural Network (MGD-NN) is put forward to compromise the influence of rotor torque interference. The simulation results show that compared with cascade PID controller based on Ngdot estimator and the one combined with collective pitch feedforward control, the novel control method proposed can reduce the overshoot of power turbine speed by more than 20%, which possesses faster response, superior dynamic effect and satisfactory robustness performance. The control method proposed can realize the fast response control of turboshaft engine with variable rotor speed better.     

基于新陈代谢GM（1,1）模型的导弹遥测故障预测算法

在人工监视遥测关键参数是否超出阈值范围以判断导弹故障的传统模式基础上,对GM（1,1）预测模型进行了改进,研究了基于新陈代谢的GM（1,1）预测算法对遥测参数实时预测效果.该算法能不断去掉最老的信息,充分利用最新的信息,避免了预测模型老化的现象;由于用于预测的数列维度较少,便于计算,能够保证算法的实时性.用MATLAB编程实现算法,比对实测数据的预测值与实际值,并进行误差分析.结果表明,该算法对遥测参数的预测精度较高,可为及时发现导弹故障提供科学的依据.