7150铝合金热变形行为及微观组织

采用Gleeble热模拟机进行热压缩实验,研究7150铝合金在变形温度为300~450℃、应变速率为0.01~10s-1条件下的变形行为,采用Zener-Hollomon参数法构建合金高温塑性变形本构方程,并对变形后的微观组织进行分析。研究表明:7150铝合金的流变应力随应变速率增大而增大,随变形温度增大而降低。该合金热压缩变形的流变应力行为可用双曲正弦形式的本构方程描述,其参数A为4.161×1014s-1,α为0.01956 MPa-1,n为5.14336,热变形激活能Q为229.7531k J/mol。随着温度升高和应变速率降低,动态再结晶逐渐取代动态回复成为合金的主要软化机制。     

接触特性对非连续性转子热致振动的影响

针对燃气轮机转子的非连续性结构间存在的接触特性,根据微凸体理论引入接触刚度和接触热阻的等效模型,建立了某型燃气轮机非连续性转子的动力学模型,分析了接触参数对转子稳、瞬态动力学特性的影响,研究了螺栓松动引起的转子热变形及其对转子快速启动过程中振动特性的影响.结果表明:预紧力、接触面的表面粗糙度和螺栓个数对转子临界转速有一定的影响,螺栓松动导致转子在启动过程中瞬态热变形最大达到7μm,过1阶临界转速时引起的转子最大响应幅值增大约30μm.在非连续性转子系统的热致振动特性分析当中,不应忽视接触参数、接触刚度和接触热阻的影响.      

高超声速复杂气动问题数值方法研究进展

高超声速流场具有复杂流动特征,其中真实气体效应、磁流体干扰效应和力热结构耦合效应等对气动力分析产生了重要影响。将流体力学研究扩展到分子动力学、电磁流体力学以及流固耦合等交叉学科领域,这给数值模拟方法带来了巨大挑战。针对高超声速气动力/热分析的热点问题,重点关注高温效应与低密度流动效应、磁流体干扰效应和力热结构耦合效应等,结合算例分析了相应的数值求解技术;在气动热方面主要比较了3类求解方法(纯工程方法、纯数值方法和基于Prandtl边界层理论的方法),并给出了相应算例;对于气动力/热/结构耦合问题,从耦合模型及耦合计算方法两方面开展了分析。最后指出了高超声速复杂气动问题数值求解技术未来需重点关注的几个方面。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

新型高温/超高温热障涂层及制备技术研究进展

简单介绍了先进航空发动机高温/超高温热障涂层(TBCs)的研究背景、意义和现状;简述了近年来国际上在新一代超高温TBCs方面的研究进展。重点介绍了近年来北京航空航天大学在新型高温/超高温TBCs方面的研究成果,包括新型超高温、高隔热陶瓷隔热层材料,1 150℃以上新型抗高温氧化金属粘结层材料,以及电子束物理气相沉积(EB-PVD)、等离子体激活EB-PVD(PA EB-PVD)和等离子物理气相沉积(PS-PVD)等新型制备工艺。最后对TBCs在未来高性能航空发动机上的应用及发展趋势进行了展望。     

某火力电厂机组控制系统的设计与实现

以某火力发电厂的建设为整体背景,结合电厂设计过程中实际出现的问题,以及以往的设计经验,利用MaxDNA控制系统,展开对于整体火力机组控制系统中的软硬件的设计。通过某火力发电厂实地进行联调联试,确保相应的设备能够正常的工作,以保证机组的正常运行。系统运行情况良好,基本实现工艺设备的控制要求,获得了用户的认可,降低了相关工作的工作强度,取得很好的经济效益。     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

高强太阳光无线能量传输能量供给平台设计

为了满足微小卫星群落编队飞行技术快速发展的需要,设计了一种能量供给平台.该平台中菲涅尔透镜（太阳能聚集装置）收集空间太阳光,并将聚焦光能耦合进光纤束（柔性转向装置）以进行传输和换向.由3个薄透镜组成的透镜组（二次发射装置）将出射光线整合成高强平行光束进行光能传输,将光能以高强太阳光形式无线传输至航天器群落,实现能量供给.该能量供给平台能量收集传输效率可达到70%以上,在提高效率、降低成本方面具有一定的优越性.      

三元乙丙橡胶薄膜黏接界面温度相关性力学性能

采用双悬臂夹层梁(DCSB)试件对三元乙丙橡胶(EPDM)薄膜黏接界面Ⅰ型断裂的温度相关性进行了研究;采用线弹性断裂力学(LEFM)方法获取了黏接界面断裂能,将其与单轴拉伸所得内聚强度作为双线性内聚力模型(CZM)参数,对不同温度条件下双悬臂夹层梁试件的Ⅰ型断裂行为进行了数值仿真.结果表明:仿真与实验曲线偏差较大,偏差出现的原因主要是未经修正的线弹性断裂力学方法所求断裂能存在较大的误差,需对其进行修正.调整模型参数使仿真曲线与实验曲线重合,获取了黏接界面的准确力学性能参数,采用此参数得到的仿真结果与实验结果具有较高的吻合度,证明了模型的可适用性.     

基于能量法和特征值法的颤振预测数值方法研究

为研究适用于工程设计的颤振数值预测方法,采用能量法和特征值法对出现颤振现象的真实叶片进行预测。通过将2种数值方法的预测结果与试验结果进行对比,验证数值预测方法的精度和工程适用性。结果表明:2种方法都较准确的判断了某典型风扇转子叶片的气弹稳定性,与试验结果基本吻合,具有较高的工程实用价值。