集中式平台自由销售代码共享研究与应用

在对目前世界范围内,航空公司之间普遍采用的代码共享合作方式进行分析的基础上,结合中国民航的实际情况,提出了同时使用中国民航传统集中式订座系统平台,系统内两家航空公司之间自由销售模式的代码共享系统解决方案,并对该设计方案的高灵活性、低成本消耗等特点进行了具体的分析。     

LARES successfully launched in orbit: Satellite and mission description

On February 13th 2012, the LARES satellite of the Italian Space Agency (ASI) was launched into orbit with the qualification flight of the new VEGA launcher of the European Space Agency (ESA). The payload was released very accurately in the nominal orbit. The name LARES means LAser RElativity Satellite and summarises the objective of the mission and some characteristics of the satellite. It is, in fact, a mission designed to test Einstein's General Relativity Theory (specifically ‘frame-dragging' and Lense-Thirring effect). The satellite is passive and covered with optical retroreflectors that send back laser pulses to the emitting ground station. This allows accurate positioning of the satellite, which is important for measuring the very small deviations from Galilei–Newton's laws. In 2008, ASI selected the prime industrial contractor for the LARES system with a heavy involvement of the universities in all phases of the programme, from the design to the construction and testing of the satellite and separation system. The data exploitation phase started immediately after the launch under a new contract between ASI and those universities. Tracking of the satellite is provided by the International Laser Ranging Service. Due to its particular design, LARES is the orbiting object with the highest known mean density in the solar system. In this paper, it is shown that this peculiarity makes it the best proof particle ever manufactured. Design aspects, mission objectives and preliminary data analysis will be also presented.     

CFDP协议中延迟NAK文件传输时间分析与仿真

未来的深空通信需要一个鲁棒的、有效与可靠的文件传输协议,在研究CCSDS提出的CFDP协议基础上,针对延迟NAK模式提出了一种新的分析方法。在保证吞吐量的前提下,对ARQ定时器优化设置,导出了平均文件传输时间的理论表达式。在单跳直连链路中,对不同条件下的平均文件传输时间进行了仿真与数值分析。仿真结果表明平均文件传输时间与PDU错误概率、PDU数目及单向传播时间等有密切关系。随机仿真与理论分析具有很好的一致性。     

极坐标系连续常值推力机动分析

连续常值推力是空间飞行常用的轨道机动方式，在空间交会与星际航行使命中具有重要的应用价值。其中，小推力适合于地球轨道航天器交会机动，而切向或周向推力以及较大的正径向推力可用于脱离地球引力场的逃逸飞行，执行星际交会使命。应用常推力作用下的极坐标系质心运动方程，对机动推力的量值没有限制；在航天器交会应用中，对相对距离也无要求。这种方法可直接获得向径与速度等轨道参数随时间或极角（绕地心的转动角）的变化，便于分析轨道转移与逃逸运动，有助于飞行使命与运动轨迹的设计。特别是，若机动转移的初轨为圆轨道，在推力较小、飞行时间不长的情况下，应用无量纲形式运动方程，可获得具有工程应用价值的近似解。文章给出一些有关的结果与应用案例。     

实线性赋范空间中算子的Fermat定理

本文给出并证明了文中的定理１，该定理是经典分析中的Ｆｅｒｍａｔ定理在现代分析学中的合理推广。据此又给出了一个中值公式在抽象分析中成立的充分条件。最后，指出了经典分析中的中值定理在抽象分析中不成立。文中各项内容相结合，较深刻地说明了中值定理在抽象分析学中不成立的原因。     

3种气动弹性状态空间建模方法的对比

研究气动弹性状态空间建模的3种常用方法:最小二乘(LS)法、最小状态(MS)法和拟合状态空间(MA)法.用2个算例从颤振和频响特性角度分析和总结了它们的建模特点.在气动力有理函数拟合建模方法(LS法、MS法)研究中,着重分析滞后根的影响;在MA法的研究中,讨论了建模的特点.最后,系统对比了3种建模方法的建模效果及使用原则,为这些方法的工程应用提供参考.仿真计算结果表明,MS法建立的模型阶数低、精度适中且使用方便,是比较好的方法,而MA法建立的模型频响特性与参考结果最为接近.     

Viability of barley seeds after long-term exposure to outer side of international space station

Barley seeds were exposed to outer space for 13 months in a vented metal container without a climate control system to assess the risk of physiological and genetic mutation during long-term storage in space. The space-stored seeds (S0 generation), with an 82% germination rate in 50 seeds, lost about 20% of their weight after the exposure. The germinated seeds showed normal growth, heading, and ripening. The harvested seeds (S1 generation) also germinated and reproduced (S2 generation) as did the ground-stored seeds. The culm length, ear length, number of seed, grain weight, and fertility of the plants from the space-stored seeds were not significantly different from those of the ground-stored seeds in each of the S0 and S1 generation. Furthermore, the S1 and S2 space-stored seeds respectively showed similar β-glucan content to those of the ground-stored seeds. Amplified fragment length polymorphism analysis with 16 primer combinations showed no specific fragment that appears or disappears significantly in the DNA isolated from the barley grown from the space-stored seeds. Though these data are derived from nine S0 space-stored seeds in a single exposure experiment, the results demonstrate the preservation of barley seeds in outer space for 13 months without phenotypic or genotypic changes and with healthy and vigorous growth in space.     

Estimation of Galactic Cosmic Ray exposure inside and outside the Earth’s magnetosphere during the recent solar minimum between solar cycles 23 and 24

The evidently low solar activity observed between solar cycles 23 and 24 during the years 2008–2010 led to a substantial increase in the Galactic Cosmic Ray (GCR) intensity in comparison with preceding solar minima. As the GCRs consist of highly-ionizing charged particles having the potential to cause biological damage, they are a subject of concern for manned missions to space. With the enhanced particle fluxes observed between 2008 and 2010, it is reasonable to assume that the radiation exposure from GCR must have also increased to unusually high levels. In this paper, the GCR exposure outside and inside the Earth’s magnetosphere is numerically calculated for time periods starting from 1970 to the end of 2011 in order to investigate the increase in dose levels during the years 2008–2010 in comparison with the last three solar minima. The dose rates were calculated in a water sphere, used as a surrogate for the human body, either unshielded or surrounded by aluminium shielding of 0.3, 10 or 40 g/cm².     

建立室内虚拟长度基线场的可行性探讨

提出了利用两平面反射镜多次反射来虚拟室外基线场,在室内完成检定光电测距仪及全站型电子速测仪测距部分的解决方案;在现有技术的层面上对该方案所面临的技术难题进行了探讨,对其可行性进行了论证;对该方案实施1000 m测长的不确定度进行了详细的分析和计算,得出了该方案完全可行的结论.     

一种异型零件空间交点尺寸的测量方法

将被测要素转换成现有三坐标可识别的几何要素，即用小平面代替不规则曲面，用与Ф3.175mm小斜孔相配合的圆器轴线代替该孔的中心线，这样就可以用现有三坐标测量软件编制测量程序，解决测量异型零件不规则曲面空间交点尺寸的技术问题。