星载综合孔径微波辐射计冗余空间定标方法研究

星载综合孔径微波辐射计系统为了实现更好的辐射测量性能,在地面对通道间剩余相位通过相位定标实验进行测量,其结果用于亮温重构时对通道间剩余相位进行补偿。冗余空间定标方法基于自身阵列冗余基线信息,该方法无需额外资源支持即可对星载综合孔径微波辐射计系统定标,可作为一种在轨的验证方案对系统综合孔径微波辐射计系统通道间剩余相位进行评估。系统性的介绍了基于星载综合孔径微波辐射计系统观测到的场景,冗余空间定标方法以及对平坦场景提出利用模拟的平坦目标响应相位修正的方法,可在点源场景、平坦场景下利用冗余空间定标方法求解通道间剩余相位,并结合仿真验证该方法的可行性。     

双臂空间机器人关节运动的一种增广自适应控制方法

讨论了载体位置、姿态均不受控制情况下,具有未知参数的自由漂浮双臂空间机器人系统的自适应控制问题.由于此类机器人系统具有结合系统动量及动量矩守恒关系得到完全能控形式的系统动力学方程,以及系统惯性参数不符合惯常的线性函数关系的特点,因而地面机器人的控制方法在此难以直接推广应用.为了克服上述难点,仅将系统动量守恒关系耦合到系统动力学方程当中,而不耦合系统动量矩守恒关系,结果得到一组欠驱动形式的系统动力学方程.该系统动力学方程的优点是关于一组组合惯性参数能保持惯常的线性函数关系.以此为基础,并借助增广变量法,针对双臂空间机器人末端爪手所持载荷参数未知的情况,设计了关节空间轨迹跟踪的自适应控制方案.该控制方案的显著优点为,不需要测量、反馈双臂空间机器人漂浮基的位置、移动速度和移动加速度.系统的数值仿真,证实了方法的有效性.      

航天发射特征事件综合和弹道融合策略优化研究与应用

特征事件综合和弹道融合是航天发射过程中最为重要的一项工作,通过特征事件发生时间和火箭飞行弹道可直观地反映出运载火箭的飞行状态。因此,为了进一步提高特征事件综合和弹道融合效果,基于遥、外测量信息,分别对参与特征事件综合和弹道融合的信息源进行分类及其影响因素进行分析,并提出了相应的信息融合策略。通过采用优化的融合策略,可进一步提高特征事件时间解算的准确性和实效性,提升弹道融合的效果,满足航天发射飞行态势显示和安全控制的任务需求。     

面向月球科研站任务的地月准实时遥操作模拟验证系统设计与关键技术研究

针对月球科研站任务地月遥操作需求和特点,设计地月准实时遥操作模拟验证系统,对其中的关键技术海量多尺度遥感数据环境感知、空地协同高精度定位、基于混合现实的预测仿真等进行了研究。提出了基于海量多尺度遥感数据的联合处理方法,环境感知数据融合可处理米级至厘米级环境感知结果;设计基于空地多运动平台协同定位的原型软件,空地协同地标约束下,定位精度不低于轨道器影像1个像素;开发了带有力觉反馈的预测仿真验证平台,在2~3 s变时延约束下可在仿真环境下协同演示遥操作过程,真实还原从端的遥操作作业场景,提高遥操作的执行效率和安全性。为地面人员的方案设计、操作手训练、故障处置等提供实时支持,为我国未来实施月球科研站任务筑牢基础。     

基于北斗三号的多区域实时动态授时服务系统

面向新一代移动通信和物联网等领域对高精度、低成本授时的需求,针对典型的实时动态授时服务只能单区域覆盖的问题,提出了一种基于北斗的多区域实时动态精密授时服务系统.该系统由标准时间、时间基准站、高精度时间频率实时传递链路、数据中心和时间用户等部分组成,可实现标准时间实时动态授时服务的全国多区域覆盖.依托中国科学院国家授时中...     

电动力缆绳离轨系统中绳索建模研究

 空间碎片对在轨运行航天器的安全构成重大威胁,使废弃卫星脱离原轨道进入大气层烧毁是减少空间碎片的有效途径。利用导电缆绳与地磁场相互作用产生的洛仑兹力使卫星特别是低地球轨道卫星的轨道高度快速衰减是一种很有应用前景的离轨方式。在研究电动力缆绳离轨的刚性杆模型基础上,建立了更符合电动力缆绳特性的柔索模型,并对刚性杆模型和柔索模型进行仿真。结果表明柔索模型能更精确地体现电动力缆绳的性质。     

Vibration Reduction of Open-chain Flexible Manipulators by Optimizing Independent Motions of Branch Links

In order to suppress vibration in flexible manipulators, a new type of manipulator mechanism with controllable local degrees of freedom is proposed. This mechanism consists of a main chain and some branch links. The main chain is of a flexible open-chain configuration with an end-effector installed at its tip, and the rigid branch links are able to perform active movements. It is proved by kinematics and dynamic analysis that, the branch links bear no direct kinematic relation to the main chain, but their independent motions can strongly affect the dynamic behavior and performance of the flexible manipulator. Then comes a new idea of suppressing vibration, in which independent motions of the branch links are used to suppress the undesired vibration of the flexible main chain through dynamic coupling. On this basis, an optimal method for reducing vibration of flexible manipulators is proposed. Finally, the effectiveness of this method is verified by numerical simulations.     

空间堆核动力技术选择研究

目前,基于太阳能、化学能的空间电源与空间推进技术,其技术能力的发展已接近极限状态,未来亟需开发基于核能的先进空间动力技术。针对低成本空间轨道运输、高功率载荷航天器、深空探测器、行星表面探测与开发等应用场景,以空间堆核电源为重点,分析了国际发展现状和未来航天需求,分别针对大功率(100 kWe～1 MWe)和小功率(1 kWe～10 kWe)应用需求,提出了技术主导方案,围绕主导技术方案梳理了关键技术,为我国空间堆核动力技术发展规划和预先研究提供参考。     

Finite-time composite guidance law with input constraint and dynamics compensation

Guidance laws are proposed for a near space interceptor with on–off type thrust as output. The target-interceptor engagement kinematics is integrated with the first-order dynamics of thruster to design guidance laws. The bang-bang type guidance law with linear sliding mode is proposed to deal with thruster dynamics, and the sufficient condition for finite time convergence is rigorously proved based on the finite-time convergence theory. According to the sufficient condition, a sliding mode guidance law with hysteresis-band switching is introduced to reduce the switching frequency of thruster. Then two guidance laws are combined into a composite guidance law to improve the guidance performance. Simulation results show that the line-of-sight angular rate can converge to a neighborhood of the equilibrium point before the final time of the guidance process, and the composite guidance law has better performance than typical guidance laws.     

Detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target

The rotational motion of a tumbling target brings great challenges to space robot on successfully capturing the tumbling target. Therefore, it is necessary to reduce the target’s rotation to a rate at which capture can be accomplished by the space robot. In this paper, a detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target is proposed. This strategy can reduce the target’s rotational velocity while maintaining base attitude stability through the establishment of the rotation attenuation controller and base attitude adjustment controller. The rotation attenuation controller adopts the multi-space hybrid impedance control method to control the friction precisely. The base attitude adjustment controller applies the dual-arm extended Jacobian matrix to stabilize the base attitude. The main contributions of this paper are as follows: (1) The compliant control method is adopted to achieve a precise friction control, which can reduce the target angular velocity steadily; (2) The dual-arm extended Jacobian matrix is applied to stabilize the base attitude without affecting the target capture task; (3) The detumbling strategy of dual-arm space robot is designed considering base attitude stabilization, realizing coordinated planning of the base attitude and the arms. The strategy is verified by a dual-arm space robot with two 7-DOF (degrees of freedom) arms. Simulation results show that, target with a rotation velocity of 20 (°)/s can be effectively controlled to stop within 30 s, and the final deflection of the base attitude is less than 0.15° without affecting the target capture task, verifying the correctness and effectiveness of the strategy. Except to the tumbling target capture task, the control strategy can also be applied to other typical on-orbit operation tasks such as space debris removal and spacecraft maintenance.