Matching design of hydraulic load simulator with aerocraft actuator

 This paper intends to provide theoretical basis for matching design of hydraulic load simulator (HLS) with aerocraft actuator in hardware-in-loop test, which is expected to help actuator designers overcome the obstacles in putting forward appropriate requirements of HLS. Traditional research overemphasizes the optimization of parameters and methods for HLS controllers. It lacks deliberation because experimental results and project experiences indicate different ultimate performance of a specific HLS. When the actuator paired with this HLS is replaced, the dynamic response and tracing precision of this HLS also change, and sometimes the whole system goes so far as to lose control. Based on the influence analysis of the preceding phenomena, a theory about matching design of aerocraft actuator with HLS is presented, together with two paired new concepts of "Standard Actuator" and "Standard HLS". Further research leads to seven important conclusions of matching design, which suggest that appropriate stiffness and output torque of HLS should be carefully designed and chosen for an actuator. Simulation results strongly support that the proposed principle of matching design can be anticipated to be one of the design criteria for HLS, and successfully used to explain experimental phenomena and project experiences.     

An experimental study of the dual-loop control of electro-hydraulic load simulator （EHLS）

This paper investigates motion coupling disturbance（the so called surplus torque）in the hardware-in-the-loop（HIL）experiments.The＇＇velocity synchronization scheme＇＇was proposed by Jiao for an electro-hydraulic load simulator（EHLS）in 2004.In some situations,however,the scheme is limited in the implementation for certain reasons,as is the case when the actuator＇s valve signal is not available or it is seriously polluted by noise.To solve these problems,a＇＇dual-loop scheme＇＇is developed for EHLS.The dual-loop scheme is a combination of a torque loop and a position synchronization loop.The role of the position synchronization loop is to decouple the motion disturbance caused by the actuator system.To verify the feasibility and effectiveness of the proposed scheme,extensive simulations are performed using AMESim.Then,the performance of the developed method is validated by experiments.     

北斗RDSS用户机测试系统关键技术研究

为了实现对北斗RDSS用户机检测的需求,研制了专用测试系统。介绍北斗RDSS用户机测试系统的基本组成和工作原理,分析了测试系统研制涉及到的部分关键技术：系统建模仿真、RDSS出站信号模拟、RDSS入站信号接收、入站信号质量分析等,最后列举了所研制的测试系统到达的主要技术指标。     

Nonlinear Adaptive Robust Force Control of Hydraulic Load Simulator

This paper deals with the high performance force control of hydraulic load simulator. Many previous works for hydraulic force control are based on their linearization equations, but hydraulic inherent nonlinear properties and uncertainties make the conventional feedback proportional-integral-derivative control not yield to high-performance requirements. In this paper, a nonlinear system model is derived and linear parameterization is made for adaptive control. Then a discontinuous projection-based nonlinear adaptive robust force controller is developed for hydraulic load simulator. The proposed controller constructs an asymptotically stable adaptive controller and adaptation laws, which can compensate for the system nonlinearities and uncertain parameters. Meanwhile a well-designed robust controller is also developed to cope with the hydraulic system uncertain nonlinearities. The controller achieves a guaranteed transient performance and final tracking accuracy in the presence of both parametric uncertainties and uncertain nonlinearities; in the absence of uncertain nonlinearities, the scheme also achieves asymptotic tracking performance. Simulation and experiment comparative results are obtained to verify the high-performance nature of the proposed control strategy and the tracking accuracy is greatly improved.     

Stribeck模型模糊整定及其在转台控制中的应用

为了实现飞行仿真转台中框阀控马达机构的高精度低速伺服,提出了模糊整定Stribeck摩擦模型状态参数的等效控制电压超前补偿和PID(Proportion Integral Differential)相结合的控制策略.为了规避常规摩擦前向补偿对系统模型及参数的依赖性,提出利用转台中框本身的控制环节直接测定用于摩擦超前补偿的Stribeck电压模型参数;针对系统超低速伺服时速度信号难以检测的特点,设计了模糊整定系统用于改进模型运行状态参数的整定;将设计好的控制器用于中框低速伺服.实验结果表明,系统响应以三角波表示的正反向最小稳定速度为0.000006(°)/s时,跟踪误差在95%时间在0.0002°内,并对其他形式信号也有很高的动态跟踪精度.     

面向星敏感器测试的数字星模系统设计

分析星敏感器和数字星模系统的功能,描述数字星模系统的功能需求,提出数字星模系统的设计方法．数字星模系统由星图组件和通信组件组成,基于该系统,针对星敏感器进行静态和动态星图测试试验,并对试验的方法和结果进行分析说明．试验表明数字星模系统及其设计方法的正确性、有效性．     

电液负载模拟器摩擦参数辨识及补偿

针对摩擦干扰在电液负载模拟器控制中的影响,提出了将被试件简化为自由伸缩刚性杆的摩擦力作用模型。模型中采用能全面反应摩擦特性的LuGre模型描述摩擦力大小。LuGre的静力摩擦系数和动力摩擦系数依托两种特殊工作状态进行辨识,相应的辨识数据验证了所求系数的准确性。摩擦补偿具体实施时,利用结构不变性原理,求解出摩擦补偿控制器。在此基础上,对负载模拟器开展了位移伺服、力矩伺服、多余力等方面的摩擦力补偿实验。实验结果表明,所求解的LuGre模型及摩擦补偿控制器可以较好地消除摩擦力对负载模拟器控制的影响。     

航天器太阳电池阵电性能测试技术

文章介绍了航天器太阳电池阵电性能技术指标,分析了影响测试的技术条件,如光谱、光照强度、温度、标准太阳电池、光照均匀度、光照稳定度、测试系统等。文章还介绍了脉冲式太阳模拟器的工作原理,提出了在航天器太阳电池电性能测试方面的发展方向和今后要解决的技术问题。     

航天器表面材料充电性能研究—关于RTV-Ⅱ和13-17涂层的评价

本文报道了RTV-Ⅱ黑漆和13-17白色涂层二种航天器温控材料的电导在综合空间环境条件下的实验结果。实验表明RTV-Ⅱ涂层材料的电导从1984年到1986年,几乎每年下降一个量级,因而充电状态明显改变。13-17涂层材料的电导对空间真空环境响应不明显,但对电子辐照和光辐照响应显著,尤其对光辐照存在强烈的记忆效应。预测该涂层在轨道上由光照区进入星蚀区也不会出现明显充电现象。     

卫星磁层亚暴环境模拟试验设备的设计

卫星表面充电是七十年代初发现的严重危害同步轨道卫星的新问题。为了寻求解决卫星表面充电问题的方法,许多国家进行了广泛的研究。我们于82年开展卫星表面充电模拟试验技术研究。本文仅就我们在磁层亚暴环境模拟设备设计中考虑的一些问题作简要介绍。阐述了对模拟系统的要求,模拟系统的组成和用途,介绍了真空系统,电子枪,光源和测量系统设计中应考虑的问题。