高速BPSK相干光通信系统对激光器线宽要求

文章概述了激光器相位噪声对零差相干检测光通信系统性能的影响，对特定的基于平衡探测的科斯塔斯（Costas）环路接收系统相位误差进行了详细的理论分析，最后获得了不同传输码速率下的零差相干检测光通信系统对激光器线宽的具体要求。     

CCSDS在我国航天领域的应用展望

CCSDS(空间数据系统咨询委员会)建议有利于增强测控系统互联互通互支持能力,满足未来航天任务对空间信息高速传输及灵活高效信息调度机制的要求,应当作为我国构建天地一体化信息网络的首选标准。提出了加强顶层设计、循序渐进地推进CCSDS建议在我国实现工程化应用的总体思路,并提出在应用过程中应当注重创新任务操作模式、关注信息安全、深化关键技术研究与验证。     

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.     

Variation in the ionospheric propagating factor M(3000)F2 at Ouagadougou,Burkina Faso

We use hourly monthly median values of propagation factor M(3000)F2 data observed at Ouagadougou Ionospheric Observatory (geographic12.4°N, 1.5°W; 5.9^o dip), Burkina Faso (West Africa) during the years Januar1987–December1988 (average F10.7 < 130 × 10⁻²² W/m²/Hz, representative of low solar flux conditions) and for January 1989–December1990 (average F10.7 ? 130 × 10⁻²² W/m²/Hz, representative of high solar epoch) for magnetically quiet conditions to describe local time, seasonal and solar cycle variations of equatorial ionospheric propagation factor M(3000)F2 in the African region. We show that that seasonal trend between solar maximum and solar minimum curves display simple patterns for all seasons and exhibits reasonable disparity with root mean square error (RMSE) of about 0.31, 0.29 and 0.26 for December solstice, June solstice and equinox, respectively. Variability Σ defined by the percentage ratio of the absolute standard deviation to the mean indicates significant dissimilarity for the two solar flux levels. Solar maximum day (10–14 LT) and night (22–02 LT) values show considerable variations than the solar minimum day and night values. We compare our observations with those of the IRI 2007 to validate the prediction capacity of the empirical model. We find that the IRI model tends to underestimate and overestimate the observed values of M(3000)F2, in particular, during June solstice season. There are large discrepancies, mainly during high solar flux equinox and December solstice between dawn and local midnight. On the other hand, IRI provides a slightly better predictions for M(3000)F2 between 0900 and 1500 LT during equinox low and high solar activity and equinox high sunspot number. Our data are of great importance in the area of short-wave telecommunication and ionospheric modeling.     

基于循环平稳性的噪声调频干扰高分辨测向方法

根据噪声调频信号循环平稳特性分析,提出了基于阵列接收信号循环均值-空域处理的波达方向(DOA)估计算法。仿真结果表明:该算法的角度估计性能明显高于比幅比相单脉冲测角法,且在高信噪比环境中,该法的估计性能更好、运算量较小。     

大展弦比运输机标模高升力构型设计与评估

介绍了中国航空工业空气动力研究院基于分层策略遗传算法的多段翼型优化设计工具和高升力构型计算评估方法,参照国内外大展弦比运输机指标为FL-9增压风洞设计了高升力构型标模,为检验标模气动性能,在法国ONERA F1风洞进行了一系列风洞试验和采用UNSMB平台进行了数值模拟。结果显示计算结果与试验结果有着较好的一致性,设计方案具有较好的增升效果。     

发动机不可控高推力适航部分豁免方法研究

介绍了发动机不可控高推力(UHT)问题的产生背景,论述了申请§25.901(c)条款有关不可控高推力的部分豁免的思路和方法.结合FAA关于不可控高推力的指导材料,给出了有关不可控高推力的持续适航工作建议,对于飞机申请§25.901条款有关不可控高推力的部分豁免具有一定的指导意义     

CLVD 法制备C/C复合材料工艺探索研究

研究了采用化学液气相沉积法制备C／C复合材料的工艺过程，分析了不同预制件、温度、浸泡时间等工艺参数对致密速度、效果的影响，并总结出了一套快速高效的致密方法。     

ASW-RTS:一种软件性能数据在线检测方法

在软件健康管理系统中,需要对相关被测构件的性能进行在线检测,从而确定构件的健康状态。针对被测构件的性能衰退检测问题,在AR(p)模型基础上,结合时间序列滚动式算法的准确性,提出了一种具有自适性策略的ASWRTS算法,用于对被测构件革新异常类性能数据的在线检测,提高检测的准确度,并基于该算法设计了构件性能异常数据的在线检测过程。实验结果表明,该算法将检测精度提高了50%左右,能够有效在线检测构件的性能衰退,说明了该算法的正确性和有效性。     

可压缩流动激波装配在格心型有限体积法中的应用

发展了一种基于格心型有限体积方法(FVM)的激波装配算法。通过定义网格节点属性可以灵活调用激波装配和激波捕捉计算方法。在使用激波装配方法时,激波节点运动速度和下游运动速度通过Rankine-Hugoniot(R-H)关系式获得,同时采用非结构动网格技术描述激波的运动以及调整其他网格节点的位置。流过激波面元的通量为上游单元的基本通量,物理概念更加清晰,通量计算也更为准确。在计算过程中,网格节点属性可以发生变化,以此实现对带有拓扑变化流场的描述。数值试验表明:本文提出的计算方法不但具有较高的计算精度,同时能有效地避免由于捕捉激波而出现的数值问题。