基于幂函数模型的民机结构腐蚀扩展寿命评定方法研究

基于飞机结构腐蚀清除后测量获取的腐蚀深度,提出了飞机结构腐蚀扩展寿命的幂函数动态预测模型以及模型参数定义方法,确定了腐蚀条件下的飞机结构腐蚀扩展寿命评定指标,建立了基于运营状态下飞机结构腐蚀信息更新的民用飞机结构腐蚀扩展寿命评定方法。     

飞机装配质量数字化检测技术研究及应用

针对飞机装配过程质量评价对数字化测量技术的需求,开展了面向飞机装配的数字化测量特征设计、测量方案设计、多系统异构测量场构建、测量误差分析与修正等技术研究,并以表面类、内部结构特征、大部件对接和活动部件装配质量的控制为例,阐述了测量设备选型、整体测量场的构建方法及其应用效果.     

基于模型的系统工程概述

由于航空领域涉及的系统日益高度复杂,为更好推进基于模型的系统工程(Model Based System Engineering,MBSE)研发体系,通过从当前遇到的问题、推行基于模型的系统工程的必要性、优势、未来的挑战等方面进行了较为详细地阐述.基于模型的系统工程研发体系具有知识表示的无二义、系统设计的一体化、沟通交流的高效率等优势,是未来发展的大趋势.     

基于响应面法的齿轮容差设计方法研究

随着附件传动系统不断向高速、重载方向发展,齿面接触可靠性问题越来越受关注.为提高齿轮可靠性,分析了齿轮传动系统常见误差类型及影响,开展了齿轮容差设计初步探讨.根据齿轮制造、加工及系统动态误差的产生原理和作用方式,基于齿轮接触应力仿真结果,确定了影响齿轮接触应力随机性的5种主要误差形式及其特征量分布规律,提出了基于响应面法的齿轮容差设计方法,给出了齿轮系统公差设计的改进方向:在进行齿轮公差设计时,重点控制H、V方向的轴向平行度公差.     

维修性设计在民用飞机环控系统中的应用

民用飞机环控系统维修性工作的目标是保证设计、研制和生产的民用飞机满足规定的适航要求,以提高飞机的可用性,从而降低对维修人力及其他资源的要求,缩减运营成本,使飞机具有良好的经济性和市场竞争力。     

民机制造环节的重量控制和减重措施研究

重量控制贯穿民用飞机从设计、制造到运营的全生命周期。尽管飞机重量的决定性因素主要在设计环节,但从国内外飞机制造商的经验来看,在飞机量产阶段仍有优化的余地。对国内外飞机制造商在飞机制造环节的减重经验进行总结,并重点阐述波音公司在制造过程中的重量预警项目（Manufacturing Weight Awareness Process,简称MWAP）,以期有所启发。     

民机节油策略研究

节油是航空公司的长效措施,各航空公司均很重视。从飞行具体环节出发,基于性能研究民机节油策略,给出飞行前重量、重心、APU 使用和滑行等措施分析和建议,并给出起飞、爬升、巡航、下降和进近着陆的经济飞行节油策略分析和建议。通过对飞行具体环节节油策略的研究,提出重视飞行计划优化和执行的思路,案例分析优化效果,对比分析现有飞行计划方法,得出飞机制造商提供包含飞行计划和QAR(Quick Access Recorder)分析系统等的整体IT解决方案,是提升节油效果的一个性价比很高的选择的结论。     

基于等 Weber 数的结冰外形修正

由于设备条件的限制,在进行结冰风洞试验时,试验 Weber 数与目标 Weber 数往往存在差异,为了获得与目标 Weber 数对应的冰形,需要对试验结果进行修正。本文分析了进行 Weber 数修正的原因,提出了根据几何特征量进行结冰外形修正的方法,并以某超临界翼型为对象,对不同 Weber 条件下的结冰外形进行了仿真,研究了Weber 数变化对结冰的影响规律,在此基础上开展了基于等 Weber 数的结冰外形修正。研究发现：(1)Weber 数主要影响冰角特征,对水滴收集特性、结冰极限及驻点冰厚度影响较小;(2)存在一个敏感 Weber 数,低于敏感值时, Weber 数变化对结冰影响不大,当 Weber 数高于敏感值时,Weber 数变化对结冰有明显影响;(3)采用本文提出的冰形修正方法,能保证冰形的宏观轮廓与目标冰形一致,修正后的冰形能适量消除由于 Weber 数误差导致的冰形差异,提高试验的精度。     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

Machining of a film-cooling hole in a single-crystal superalloy by high-speed electrochemical discharge drilling

Single-crystal superalloys are typical advanced materials used for manufacturing aeroengine turbine blades. Their unique characteristics of high hardness and strength make them exceedingly difficult to machine. However, a key structure of a turbine blade, the film-cooling hole,needs to be machined in a single-crystal superalloy; such machining is challenging, especially considering the increasing levels of machining efficiency and quality demanded by the aeroengine industry. Tube electrode high-speed electrochemical discharge drilling(TSECDD), a hybrid technique of high-speed electrical discharge drilling and electrochemical machining, provides high machining efficiency and accuracy, as well as eliminating the recast layer. In this study, TSECDD is used to machine a film-cooling hole in a nickel-based single-crystal superalloy(DD6). The Taguchi methods of experiment are used to optimise the machining parameters. Experimental results show that TSECDD can effectively drill the film-cooling hole; the optimum parameters that give the best performance are as follows: pulse duration: 12 ls, pulse interval: 30 ls, peak current:6 A, and salt solution conductivity: 3 m S/cm. Finally, a hole is machined by TSECDD, and the results are compared with those obtained by electrical discharge machining. TSECDD is found to be promising for improving the surface quality and eliminating the recast layer.