Understanding magnetotail current sheet meso-scale structures using MHD simulations

Recent Cluster observations have strongly supported the existence of meso-scale structure in the magnetotail current sheet. In our study, a magnetohydrodynamic simulation event study exhibited current sheet behavior comparable to that seen in the Cluster observations. Geotail and DoubleStar observations also show that the simulation is providing a realistic representation of the magnetosphere during the period of interest; that is, when the current sheet evidently becomes bifurcated. The magnetohydrodynamic simulation allows us to place the local observations into a global contest. It shows that the observations can be explained in terms of localized reconnection tailward of the Cluster location and the formation of a flux rope nearby. The simulation also features wave-like structure across the current sheet.     

针栓式喷注单元膜束撞击雾化混合过程数值模拟

为了全面认识针栓式喷注器喷雾场结构，基于自适应网格加密技术和分三相计算的PLIC VOF（Piecewise Linear Interface Calculation Volume of Fluid）方法对针栓式喷注单元膜束撞击雾化混合过程进行了仿真分析，通过对两路推进剂分别进行界面追踪，获得了膜束撞击雾化混合过程的详细结构特征，与高速摄影试验结果定性定量对比均吻合较好，验证了数值方法的准确性。以此为基础对膜束撞击的喷雾场结构、撞击变形过程、流场涡结构、雾化破碎典型特征及破碎后的雾化混合分布特征进行了识别分析，结果表明：膜束撞击形成了液束未穿透液膜和液束穿透液膜2种不同的喷雾扇结构。膜束撞击形成的喷雾扇呈"Ω"形，膜束同时发生弯曲变形和横截面变形。另外，膜束撞击同时受到正压和剪切应力作用，导致了一系列复杂涡流现象，使得相互作用增强，雾化混合均增强，这也是膜束撞击喷注构型优于膜膜撞击的本质原因。最后，还发现膜束撞击喷雾场液滴分布呈现分区结构特征，分别是液束控制主导的上雾化区、液膜控制主导的下雾化区及夹在中间的混合区，实际中应兼顾雾化特性和混合特性，选取中等动量比膜束撞击，这可为针栓式喷注器的理论研究和工程设计提供重要参考。     

高压金属软管应力及参数敏感度分析

某型号发动机热试车考核中高压金属软管多次出现破坏。通过建立软管有限元模型,采用非线性有限元分析了软管应力分布和各部分承载特点,判断波峰处轴向应力是影响软管结构强度的主要因素,有限元计算结果和试验破坏部位一致,表明有限元模型的合理性。在此基础上,通过参数化建模、设计中心复合实验和进行参数敏感度分析,得出影响波峰处最大轴向应力的敏感参数,为结构参数优化提供了依据。     

钛合金熔模精铸氧化锆陶瓷型壳／金属界面反应研究

通过实际浇注和真空扩散连接分别制取了钛／型壳界面，借助ＳＥＭ、ＥＰＭＡ和显微硬度仪等分析测试手段对所得界面进行了深入研究，初步提出了以Ｚｒ、Ｏ元素向钛基体内的扩散为主导的界面反应机制。实验结果表明，界面反应并非在整个界面上均衡推进，而是在浓度、温度、能量起伏、以及陶瓷颗粒位向适宜的区域优先发生界面反应     

新型电工钢片磁性能无损检测传感器及应用

介绍了一种新型电工钢片磁性能无损检测传感器及其测量原理 ,同时讨论了该传感器的设计原则并给出了典型数据及仿真测试结果     

航天电子产品金属晶须形成机理、危害及抑制措施分析

金属晶须自发生长是材料科学中长期受到关注的科学现象.随着航天电子产品集成度的提高,由金属晶须自发生长引起的短路和电子故障问题对航天电子产品的可靠性构成了潜在的威胁.因此,研究金属晶须的生长规律,分析金属晶须的生长机理,探寻抑制金属晶须生长的技术手段成为当前研究的热点.针对近年来国内外对金属晶须生长现象的一些相关研究进行了分析,主要包括金属晶须的生长行为、各种影响金属晶须生长的因素、解释锡晶须生长机理的理论等.结合航天型号金属晶须生长导致的故障,对晶须危害进行了分析,并提出了金属晶须抑制的常用措施.     

Complexity,Forced and/or Self-Organized Criticality,and Topological Phase Transitions in Space Plasmas

The first definitive observation that provided convincing evidence indicating certain turbulent space plasma processes are in states of ‘complexity’ was the discovery of the apparent power-law probability distribution of solar flare intensities. Recent statistical studies of complexity in space plasmas came from the AE index, UVI auroral imagery, and in-situ measurements related to the dynamics of the plasma sheet in the Earth's magnetotail and the auroral zone. In this review, we describe a theory of dynamical ‘complexity’ for space plasma systems far from equilibrium. We demonstrate that the sporadic and localized interactions of magnetic coherent structures are the origin of ‘complexity’ in space plasmas. Such interactions generate the anomalous diffusion, transport, acceleration, and evolution of the macroscopic states of the overall dynamical systems. Several illustrative examples are considered. These include: the dynamical multi- and cross-scale interactions of the macro-and kinetic coherent structures in a sheared magnetic field geometry, the preferential acceleration of the bursty bulk flows in the plasma sheet, and the onset of ‘fluctuation induced nonlinear instabilities’ that can lead to magnetic reconfigurations. The technique of dynamical renormalization group is introduced and applied to the study of two-dimensional intermittent MHD fluctuations and an analogous modified forest-fire model exhibiting forced and/or self-organized criticality [FSOC] and other types of topological phase transitions. This revised version was published online in August 2006 with corrections to the Cover Date.     

用凝固模拟方法预测铝合金铸件缩松的形成

用有限元法和六节点等参数单元对铝合金金属型铸造过程进行了温度场的数值模拟，对铸件不同典型部位进行了金相分析，结果表明，参数Ｇ／可有效地预测铝合金缩松形成倾向的大小，计算值与实测值基本一致。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

电流片的稳定性问题

本文从理想磁流体力学出发,分析了固结在光球层上的半圆弧形电流片的线性稳定性。主要结论是:当沿电流方向的磁场小于某临界值时,电流片将不稳定,且最先引起不稳定的扰动模沿电流方向的波数近似为电流片圆弧直径的倒数。