国内外行星表面巡视器自主导航技术研究

作为航天技术发展的前沿和趋势,深空探测是人类历史上最为复杂的系统工程之一.星球巡视器是在星球表面移动作业的无人探测系统,能够对星球表面进行大面积、近距离和接触式的考察,是地外星球着陆探测作业的主要手段.星球巡视器导航技术是研究星球巡视器的关键技术之一,其导航自主性能直接影响星球探测计划能否顺利进行.本文首先概述了星球巡...     

中继卫星多址链路调度问题的约束规划模型及算法研究

中继卫星多址链路调度问题是中继卫星系统应用中必须解决的重要问题,其重要特点在于,中继卫星与用户航天器之间并非时时可见,因此通信任务存在可见时间窗口约束。只有在可见时间窗口内,通信任务才可能执行并完成。在进行合理假设的基础上,采用人工智能中的约束规划技术,建立中继卫星多址链路调度问题的约束规划模型,并提出了基于时间窗口期望值的多步迭代算法。应用结果表明,中继卫星多址链路调度模型的建立与求解是合理的。     

微纳InSAR卫星总体技术研究

微纳合成孔径雷达干涉(Synthetic Aperture Radar Interferometry, InSAR)卫星是对地定量化遥感的重要手段。开展了微纳InSAR卫星系统总体技术研究,给出了使得干涉测量覆盖范围最大的双星编队构型设计方法,建立了低燃料消耗双星轨道参数设计准则,提出高功能密度比InSAR卫星系统的设计方法,包括载荷平台一体化、卫星高集成模块化等总体设计方法,并给出了相应的设计实例。     

Near-infrared study of open clusters Teutsch 10 and Teutsch 25

The astrophysical parameters have been estimated for two unstudied open star clusters Teutsch 10 and Teutsch 25 using the Two Micron All Sky Survey ($2\mathit{MASS}$) database. Radius is estimated as 4.5 arcmin for both clusters using radial density profiles. We have estimated proper motion values in both RA and DEC directions as $2.28\pm 0.3$ and $-0.38\pm 0.11$?mas?yr^?1 for Teutsch 10 and $0.48\pm 0.3$ and $3.35\pm 0.16$?mas?yr^?1 for Teutsch 25 using $\mathit{PPMXL}$¹ catalog. By estimating the stellar membership probabilities, we have identified 30 and 28 most likely members for Teutsch 10 and Teutsch 25 respectively. We have estimated the reddening as $E(B-V)=0.96\pm 0.3$?mag for Teutsch 10 and $0.58\pm 0.2$?mag for Teutsch 25, while the corresponding distances are $2.4\pm 0.2$ and $1.9\pm 0.1$?kpc. Ages of $70\pm 10$?Myr for Teutsch 10 and $900\pm 100$?Myr for Teutsch 25 are estimated using the theoretical isochrones of metallicity Z?=?0.019. The mass function slopes are derived as $1.23\pm 0.30$ and $1.09\pm 0.35$ for Teutsch 10 and Teutsch 25 respectively. Estimated mass function slope for both the clusters are close to the Salpeter value ($x=1.35$) within the errors. Estimated values of dynamical relaxation time are found to be less than cluster’s age for these objects. This concludes that both objects are dynamically relaxed. The possible reason for relaxation may be due to dynamical evolution or imprint of star formation or both.     

面向绕月交会对接的同波束VLBI研究

针对"嫦娥5号"(CE-5)探测器间高精度相对测量需求,设计了我国深空干涉测量处理中心框架下的同波束VLBI处理算法,分析了X波段同波束VLBI相位解模糊条件和结果;通过引入群时延辅助的相位干涉技术,大幅抑制了干涉时延随机误差,为同波束VLBI中相位解模糊提供了先验条件;利用CE-5对接实测数据验证了本文工作的有效性,为CE-5任务同波束VLBI的实施奠定了基础。     

复合材料结构健康主动监测中激励信号的优化

利用L am b波频散方程及其数值求解得到的频散曲线,对L am b波模式及激励信号中心频率范围进行预测。建立了试验测试系统,利用集成在复合材料层合板上的PZT压电陶瓷片作为驱动器和传感器,激励并接收结构中激发的L am b波信号。对具有不同函数形式、中心频率和波峰数的信号激励,结构中传播的L am b波模式进行试验研究,为激励信号的选择与优化提供依据。利用H ilbert-Huang变换及H ilbert谱提取传感器信号特征,提出了L am b波信号在结构中传播时的能量衰减率和损伤敏感度两个考察指标,并据此对激励信号进行优化。实验结果表明,优化后的激励信号在结构中能激发出单一模式的L am b波(S0模式),有效地抑制了多模式现象的出现。同时,激发出的L am b波具有最低的能量衰减和最高的损伤灵敏度,响应信号特征明显,便于损伤识别。     

ORB-SLAM系统优化框架分析概述

首先阐述了ORB-SLAM系统的核心思想和基本框架,介绍了SLAM系统中光束平差法的应用实现,然后针对视觉里程计部分不同的关键帧位姿优化过程分别进行了详细阐述,并利用KITTI数据集的不同序列的实验结果进行比较研究,给出了核心的光束平差法在ORB-SLAM中的具体工作方式及性能分析,最后讨论和分析了ORB-SLAM的优势和不足。     

翼型过失速动态实验测控系统

介绍西北工业大学翼型研究中心用于翼型过失速动态特性研究的实验装置和测控系统的设计、系统性能和结构、数据采集、数据处理方法和实验结果。也对动态实验中测量、控制与精度等问题展开讨论。     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.