The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

DORIS processing at the European Space Operations Centre

This paper gives an overview of the DORIS related activities at the Navigation Support Office of the European Space Operations Centre. The DORIS activities were started in 2002 because of the launch of the Envisat satellite where ESOC is responsible for the validation of the Envisat Precise Orbits and a brief overview of the key Envisat activities at ESOC is given. Typical orbit comparison RMS values between the CNES POE (GDR-C) and the ESOC POD solution is 6.5, 18.8 and 23.1 mm in radial-, along- and cross-track direction. In the framework of the generation of the ITRF2008 ESOC participated in the reprocessing of all three space geodetic techniques; DORIS, SLR, and GPS. Here the main results of our DORIS reprocessing, in the framework of the International DORIS Service (IDS), are given. The WRMS of the weekly ESOC solution (esawd03) for the 2004–2009 period compared to the IDS-1 combined solution is of the order of 12 mm. Based on the long time series of homogeneously processed data a closer look is taken at the estimated solar radiation pressure parameters of the different satellites used in this DORIS analysis. The main aim being the stabilization of the Z-component of the geocentre estimates. We conclude that the ESOC participation to the IDS ITRF2008 contribution has been beneficial for both ESOC and the IDS. ESOC has profited significantly from the very open and direct communications and comparisons that took place within the IDS during the reprocessing campaign.     

基于混合编程技术的AOCC应用软件快速仿真平台

介绍基于混合编程技术的AOCC应用软件的快速仿真平台的整体框架设计以及具体实现．基于该方法构建的快速仿真平台，能够满足软件开发人员对基于8086汇编语言开发的AOCC应用软件开、闭环调试和测试的要求，对提高软件的开发效率和保证软件的质量有积极意义．     

卫星用两种单相流体回路方案对比研究

单相流体回路系统是航天器主动热控技术中的一种重要方式。文章概述了流体回路的工作原理及理论基础，总结了单相流体回路的设计思路，结合某卫星型号，设计了两种流体回路方案，在SINDA／FLUINT中建立数值仿真模型进行分析计算，并比较了两种方案的应用性能。结果显示，将单相流体回路系统应用于卫星，可取得较好的控温效果。     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

现代小卫星与大众化空间时代

通过论述现代小卫星技术30年的发展历程,总结其技术发展水平并举出现阶段的典型应用实例,讨论小卫星未来的发展方向,论述大众化空间与现代小卫星的关系,总结现代小卫星技术服务于大众化空间的各项特征。     

绳系卫星部署阶段的动力学分析

绳系卫星系统部署阶段末时刻状态决定着其编队飞行的初始状态，为了研究不同因素对绳系卫星系统部署阶段运动的影响，本文建立了一种简单的平面哑铃模型，将系绳视作有阻尼的弹簧，两个卫星视作刚体，考虑重力梯度力矩。通过仿真，发现系绳释放的速度和副星推力是影响绳系卫星系统部署阶段稳定性的主要因素。     

基于拉盖尔函数的卫星姿态预测控制方法

针对卫星在空间站中进行绕飞检测时的姿态控制问题，考虑卫星的姿态轴需要躲避禁飞区域并指向期望位置，提出了一种基于拉盖尔函数的模型预测控制方法，实现了对卫星姿态轴的控制。在模型预测控制方法的基础上，通过拉盖尔函数，将优化多个控制输入转换为优化少数的拉盖尔系数，建立了拉盖尔模型预测的控制策略，改善了传统的模型预测控制方法计算效率差的问题，减少了优化时间。采用卫星在空间站中绕飞的模型进行数值仿真验证，结果表明该方法能够使卫星的姿态轴躲避禁飞区并到达指定位置。与传统方法相比，这种基于拉盖尔函数的模型预测控制策略能够提高优化效率，减少计算时间。     

连续推力机动轨道优化设计的贝塞尔曲线法

提出一种基于贝塞尔曲线的平面机动轨道设计方法。该方法将贝塞尔曲线方程与轨道形状方程相结合，利用得到的复合函数作为轨道方程来对机动轨道进行数学描述；通过约束条件获得可行的机动轨道族，由控制点设计给出具体的优化变量，将累积速度增量作为优化指标函数；并利用优化算法完成参数优化，从而得到最优机动轨道。最后针对设计的机动轨道推力峰值较大的问题，进一步提出了分段贝塞尔曲线法，在降低推力峰值的同时，可进一步降低燃料消耗，并在平面机动转移轨道设计的基础上，通过梯度下降对自由控制点进行修正，解决了考虑时间约束的平面轨道交会问题。