从图像信息容量和图像功率谱看 CBERS-1卫星图像

文章从信息容量和图像功率谱这两个方面评价了CBERS-1的图像质量。并通过将同一地区的CBERS-1图像和TM图像进行比较,客现反映了CBERS-1卫星的图像质量。实验结果表明CBERS-1图像在信息丰富程度和图像综合的纹理特征上与TM图像质量相当,具有很好的可比性。     

电视导引头图像闪烁故障分析

针对电视导引头存在的“图像闪烁”故障，重点分析了故障的常发生部位，如硅靶管、CCD、图像处理电路和电视摄像机光圈等，并从故障部位的结构特点和工作原理入手，详细阐述了故障产生的原因、机理以及排故方法，为同类故障的修理提供参考。     

Waveform-based spaceborne GNSS-R wind speed observation: Demonstration and analysis using UK TechDemoSat-1 data

This paper explores two types of mathematical functions to fit single- and full-frequency waveform of spaceborne Global Navigation Satellite System-Reflectometry (GNSS-R), respectively. The metrics of the waveforms, such as the noise floor, peak magnitude, mid-point position of the leading edge, leading edge slope and trailing edge slope, can be derived from the parameters of the proposed models. Because the quality of the UK TDS-1 data is not at the level required by remote sensing mission, the waveforms buried in noise or from ice/land are removed by defining peak-to-mean ratio, cosine similarity of the waveform before wind speed are retrieved. The single-parameter retrieval models are developed by comparing the peak magnitude, leading edge slope and trailing edge slope derived from the parameters of the proposed models with in situ wind speed from the ASCAT scatterometer. To improve the retrieval accuracy, three types of multi-parameter observations based on the principle component analysis (PCA), minimum variance (MV) estimator and Back Propagation (BP) network are implemented. The results indicate that compared to the best results of the single-parameter observation, the approaches based on the principle component analysis and minimum variance could not significantly improve retrieval accuracy, however, the BP networks obtain improvement with the RMSE of 2.55 m/s and 2.53 m/s for single- and full-frequency waveform, respectively.     

一种电子天平测量结果的数据处理优化方法

电子天平具有数字化特性和较高的分辨力。本文通过与质量差值法的对比,提出一种新的电子天平测量结果的处理方法——比例系数法,并通过理论和实践验证了此方法的可行性。     

Location-aware channel estimation for capacity gains on multibeam satellite links

Bandwidth is an expensive and scarce resource, thus its efficient exploitation is of paramount importance. Recent communication satellites feature sophisticated spatial access strategies through spot beams providing this way a total throughput in the range of 100 Gbit/s. Next generations of communication satellites, as postulated in the Satellite Communications Network of Experts (SatNEx) III, a project funded by the European Space Agency (ESA) for advanced research in satellite communications, require technological developments to achieve the Tbit/s region. Multibeam architectures formed by a central gateway, a multibeam satellite, and an aggressive frequency reuse strategy can meet such ambitious design goals. Interference problems are tackled by appropriate countermeasures such as (joint) precoding and beamforming on the forward link as well as multi-user detection on the return link; these methods require accurate and timely knowledge of the channel state, which in turn necessitates suitable algorithms for channel estimation. This paper addresses performance issues related to channel state estimation on the symbol-synchronous forward link and the frame-synchronous return link. It highlights for both directions the potential performance gain by assuming a priori knowledge of the user position, in this context referred to as location-aware channel estimation.     

多元高温合金固溶极限预测

综合考虑了溶质元素与基体元素的原子半径、电负性以及外层电子数的立方根对溶质元素固溶度的影响，推导出二元合金的固溶度定量方程，提出了多元高温合金固溶极限曲线的预测新方法，并将其应用于计算镍基和钴基三元合金相图的γ／（γ＋σ）相界和γ（γ＋μ）相界。结果表明，计算的固溶极限曲线与已知相图的固溶极限曲线较吻合，与Ｍｄ值法计算的相界比较，该方法具有较高的精度。     

卫星天线反射面板热形变面形误差检测方法

为实现航天卫星天线面板热形变面形误差高精度检测,提出利用三坐标测量系统搭载高精度激光位移传感器,对检测对象进行扫描测量;并通过对其系统误差来源进行分析、公差合理分配及误差控制,提出对测量系统进行整体优化,以满足所提出检测精度要求。为验证所提出方法的可行性,搭建测量系统,对标准试件的测量数据进行面形拟合,获得测量偏差优于±4.22μm/m2;分别制作常规铝板及光滑铝板作为测试对象,在其背部黏贴加热板的加热方式,以模拟卫星面板在实际工作环境中发生热形变。采用提出的方法对其进行了热形变面形误差检测实验,检测结果验证了所提出方法的可行性。     

基于LabVIEW的单光子探测器量子效率测控软件设计CSCD

介绍了利用相关光子法测量单光子探测器量子效率的原理和测量系统,开发了一套用于该系统的测控软件。软件采用Lab VIEW的标准状态机结构,使用VISA串口程序库、Active X控件和报表生成器,编写了激光器控制、符合光子测量、测试报告生成等分支程序,实现控制状态机分支的切换,和其他各项功能的调用。实际应用表明,该软件测控系统运行可靠、界面友好,满足单光子探测器量子效率测量的要求。     

基于FDG和GA的故障诊断技术在电子对抗装备中的应用

探讨了模糊有向图（Fuzzy Directed Graph,FDG）和遗传算法（Genetic Algorithm,GA）相结合的故障诊断技术及其在电子对抗装备故障诊断中的具体应用。根据电子对抗装备组件的实际状态,应用模糊理论得出各组件发生故障的可能性,建立电子对抗装备的模糊有向图,利用遗传算法搜索出模糊有向图中可能的故障传播路径。实践表明,该技术应用在电子对抗装备的故障诊断中是行之有效的,取得了较好的诊断结果。     

Spin-stabilized satellite magnetic attitude control scheme without initial detumbling

The angular motion of an axisymmetrical satellite equipped with an active magnetic attitude control system is considered. The dynamics of the satellite are analytically studied on the whole control loop. The control loop is as follows: preliminary reorientation along with nutation damping, spinning about the axis of symmetry, then precise reorientation of the axis of symmetry in inertial space. Reorientation starts right after separation from the launch vehicle. Active magnetic attitude control system time-response with respect to its parameters is analyzed. It is proven that low-inclined orbit forces low control system time-response. Comparison with the common control scheme shows the time-response gain. Numerical analysis of the disturbances effect is carried out and good pointing accuracy is proved.