等离子体在军事上的应用

简要介绍了等离子体的特性及其在现代战争中的应用。着重讨论了等离子体在隐身技术、巡航导弹防御中的应用 ,另外还分析了以等离子体作为动力的等离子体火箭和等离子体武器的原理。     

从图像信息容量和图像功率谱看 CBERS-1卫星图像

文章从信息容量和图像功率谱这两个方面评价了CBERS-1的图像质量。并通过将同一地区的CBERS-1图像和TM图像进行比较,客现反映了CBERS-1卫星的图像质量。实验结果表明CBERS-1图像在信息丰富程度和图像综合的纹理特征上与TM图像质量相当,具有很好的可比性。     

带有参考信号的直接序列扩频系统

扩频通信系统中码同步的精度及其电路的复杂程度直接影响系统的性能、体积和成本。采用发射参考信号法可以简化接收机端的码同步电路 ,从而大大减小遥控遥测系统及无线局域网中扩频接收机的体积和成本。本文给出了采用 MAXIM芯片组实现 UHF频段带有发射参考信号的直接序列扩频系统 ,并通过 System View软件进行了仿真 ,结果表明该方法可获得较好的通信性能 ,易于工程实现     

Comparison of alternative route selection strategies based on simulation optimization

Air traffic flow management (ATFM) is a collaborative process between the airspace provider and the airspace users. The result of the collaboration should be an outcome that maxi-mizes the utility of the system without excessively penalizing any of the agents. This paper develops a discrete-event simulation model which consists of aggregate departure/arrival airports, flight routes, and sectors for evaluating the alternative collaborative route selection strategy. Given the different perspectives from air traffic control center (ACC) and airlines, eight performance-metrics and five alternative route selection strategies represent the past, current and proposed air traffic flow management operations that were evaluated. The Monte Carlo method combined with the Optimal Computing Budget Allocation (OCBA) simulation optimization technique is employed to assess the performance of different strategies. A case study of the upper air routes in central and southern China shows that the proposed model can be readily implemented to simulate different kinds of air traffic flow management strategies and predict the effect of changes on the airspace sys-tem. It also shows that the proposed alternative collaborative route selection strategy is an effective way in alleviating the en-route traffic congestion.     

LabVIEW在锂离子电池测试系统中的应用研究CSCD

针对锂离子电池测试系统需求,设计了采用Lab VIEW开发的测试系统。本文介绍了锂离子电池测试系统的组成和软件功能,叙述了Lab VIEW调用动态链接库实现CAN通信,叙述了利用Lab VIEW外部程序接口Active X控件实现数据库访问、Word报表生成和Excel电子表格导出。     

Waveform-based spaceborne GNSS-R wind speed observation: Demonstration and analysis using UK TechDemoSat-1 data

This paper explores two types of mathematical functions to fit single- and full-frequency waveform of spaceborne Global Navigation Satellite System-Reflectometry (GNSS-R), respectively. The metrics of the waveforms, such as the noise floor, peak magnitude, mid-point position of the leading edge, leading edge slope and trailing edge slope, can be derived from the parameters of the proposed models. Because the quality of the UK TDS-1 data is not at the level required by remote sensing mission, the waveforms buried in noise or from ice/land are removed by defining peak-to-mean ratio, cosine similarity of the waveform before wind speed are retrieved. The single-parameter retrieval models are developed by comparing the peak magnitude, leading edge slope and trailing edge slope derived from the parameters of the proposed models with in situ wind speed from the ASCAT scatterometer. To improve the retrieval accuracy, three types of multi-parameter observations based on the principle component analysis (PCA), minimum variance (MV) estimator and Back Propagation (BP) network are implemented. The results indicate that compared to the best results of the single-parameter observation, the approaches based on the principle component analysis and minimum variance could not significantly improve retrieval accuracy, however, the BP networks obtain improvement with the RMSE of 2.55 m/s and 2.53 m/s for single- and full-frequency waveform, respectively.     

测量船通信网络自检测方法

针对测量船通信网络由2层帧方式交换升级为3层包交换方式后无法使用上星自环检测方式实现自检测的问题,在分析通信网络自检测模式下的链路特性的基础上,提出基于组播报文实现自检测的构想。设计利用组播洪泛特性实现报文环回的网络拓扑结构以及实现检测与对比报文的硬件设备,阐述检测软件发送、接收、处理报文的流程,实现了网络通断、时延及丢包率的自检测,并通过模拟检测实验证明了设计方案是切实可行的。     

Location-aware channel estimation for capacity gains on multibeam satellite links

Bandwidth is an expensive and scarce resource, thus its efficient exploitation is of paramount importance. Recent communication satellites feature sophisticated spatial access strategies through spot beams providing this way a total throughput in the range of 100 Gbit/s. Next generations of communication satellites, as postulated in the Satellite Communications Network of Experts (SatNEx) III, a project funded by the European Space Agency (ESA) for advanced research in satellite communications, require technological developments to achieve the Tbit/s region. Multibeam architectures formed by a central gateway, a multibeam satellite, and an aggressive frequency reuse strategy can meet such ambitious design goals. Interference problems are tackled by appropriate countermeasures such as (joint) precoding and beamforming on the forward link as well as multi-user detection on the return link; these methods require accurate and timely knowledge of the channel state, which in turn necessitates suitable algorithms for channel estimation. This paper addresses performance issues related to channel state estimation on the symbol-synchronous forward link and the frame-synchronous return link. It highlights for both directions the potential performance gain by assuming a priori knowledge of the user position, in this context referred to as location-aware channel estimation.     

国产着色渗透探伤剂主要性能的普查

本文对国产大部分着色渗透剂、清洗剂、显像剂的主要性能进行了测试，提出了存在的问题，供用户在使用过程中，对探伤剂的性能要求及监督引起重视。     

卫星天线反射面板热形变面形误差检测方法

为实现航天卫星天线面板热形变面形误差高精度检测,提出利用三坐标测量系统搭载高精度激光位移传感器,对检测对象进行扫描测量;并通过对其系统误差来源进行分析、公差合理分配及误差控制,提出对测量系统进行整体优化,以满足所提出检测精度要求。为验证所提出方法的可行性,搭建测量系统,对标准试件的测量数据进行面形拟合,获得测量偏差优于±4.22μm/m2;分别制作常规铝板及光滑铝板作为测试对象,在其背部黏贴加热板的加热方式,以模拟卫星面板在实际工作环境中发生热形变。采用提出的方法对其进行了热形变面形误差检测实验,检测结果验证了所提出方法的可行性。