氢致Ⅰ型裂纹扩展的位错塞积群模型

本文利用位错理论和夹杂理论研究了Ⅰ型裂纹前方的位错塞积群和氢气团以及它们之间的交互作用，求得了塞积群的位借密度、应力集中系数和裂纹扩展速率。所得结果表明，氢气团促进裂纹尖端位猪源开动，即促进滞后塑性变形，提高塞积群的应力集中系数，引起材料脆化，促进微裂纹核形成。     

焊后热处理对高温运行10CrMo910钢管接头持久寿命的影响

本文通过１０ＣｒＭｏ９１０钢大口径厚壁管道高温模拟试验证实，焊后热处理是一个短时超高温运行过程，它使１０ＣｒＭｏ９１０钢管接头组织提前老化，显著降低了接头的持久寿命。试验结果表明，传统的焊后热处理工序应当取消。     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

多臂空间机器人的视觉伺服与协调控制

针对多臂空间机器人自主目标抓捕任务,首先建立多臂空间机器人的运动模型和其与目标的相对运动模型,采用Kane方法建立多臂空间机器人的动力学模型;其次,研究基于视觉伺服的机械臂在线轨迹规划算法,并引入零反作用机动,消除机械臂运动对平台姿态的扰动;再次,在不使用零反作用机动功能时,分别使用基于角动量前馈补偿的协调控制算法和逆动力学方法设计了协调控制器,在机械臂运动时保持平台姿态和相对目标的位置。最后,开发了基于Matlab的仿真软件MASS（多臂空间机器人仿真）,仿真结果校验了上述方法的有效性。     

科学评价党史，正确处理历史遗留问题——论邓小平指导党史研究的基本原则

本文系统阐述了邓小平同志指导党史研究、正确处理历史遗留问题的六大原则：“向前看”原则;“宜粗不宜细”原则;“有错必纠”原则;客观性原则;分析个人责任与分析复杂背景相结合的原则;总结成功经验与汲取失败教训相结合的原则。文章深入分析了上述原则的内涵、要求及其意义。     

Photolytic behaviour of methane at Lyman-α and 248 nm: Studies in the frame of a simulation program of Titan’s atmosphere (S.E.T.U.P.)

This paper first describes briefly some of the forefront global simulations of Titan’s atmosphere that have been carried out up to now. In these experiments, an initial gaseous mixture of N₂/CH₄ is submitted to a single energy source and the retrieved gas and/or solid phase(s) is/are analyzed by different techniques.     

New evidence for strong non-thermal effects in Tycho’s supernova remnant

For the case of Tycho’s supernova remnant (SNR), we present the relation between the blast wave and contact discontinuity radii calculated within the nonlinear kinetic theory of cosmic ray (CR) acceleration in SNRs. It is demonstrated that these radii are confirmed by recently published Chandra measurements which show that the observed contact discontinuity radius is very close to the shock radius. Therefore a consistent explanation of these observations can be given in terms of efficient CR acceleration which makes the medium more compressible.     

关于Access2000的安全机制解析

Microsoft Access 2000数据库作为常用的桌面数据库软件，在中小型的数据库系统中得到了广泛的应用。针对Access2000安全性能不高，探讨如何设置及提高Access2000的安全性方法。     

Advanced fractal approach for unsupervised classification of SAR images

Unsupervised classification of Synthetic Aperture Radar (SAR) images is the alternative approach when no or minimum apriori information about the image is available. Therefore, an attempt has been made to develop an unsupervised classification scheme for SAR images based on textural information in present paper. For extraction of textural features two properties are used viz. fractal dimension D and Moran’s I. Using these indices an algorithm is proposed for contextual classification of SAR images. The novelty of the algorithm is that it implements the textural information available in SAR image with the help of two texture measures viz. D and I. For estimation of D, the Two Dimensional Variation Method (2DVM) has been revised and implemented whose performance is compared with another method, i.e., Triangular Prism Surface Area Method (TPSAM). It is also necessary to check the classification accuracy for various window sizes and optimize the window size for best classification. This exercise has been carried out to know the effect of window size on classification accuracy. The algorithm is applied on four SAR images of Hardwar region, India and classification accuracy has been computed. A comparison of the proposed algorithm using both fractal dimension estimation methods with the K-Means algorithm is discussed. The maximum overall classification accuracy with K-Means comes to be 53.26% whereas overall classification accuracy with proposed algorithm is 66.16% for TPSAM and 61.26% for 2DVM.     

Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an auxetic material

Auxetic materials have previously been shown to enhance various performances due to its unusual property of becoming fatter when uniaxially stretched and thinner when uniaxially com-pressed (i.e., the materials exhibit a negative Poisson’s ratio). The current study focuses on assessing the potential of an auxetic material to enhance the buckling capacity of a rectangular plate under uniaxial compression. The in-plane translational restraint along the unloaded edges that was often neglected in open literature is taken into consideration in our buckling model proposed in this study. The closed-form expressions for the critical buckling coefficient of the rectangle are provided and the predicted results agree well with those determined by the finite element method. Further-more, the results indicate that the buckling performance of a rectangular plate under uniaxial com-pression can be significantly improved by replacing the traditional material that has a positive Poisson’s ratio with an auxetic material when there is in-plane translation restraint along the unloaded edges.