姿态角幅值约束下的太阳帆Lissajous轨道保持控制

太阳帆航天器以两姿态角作为轨道控制输入时, 其轨道动力学方程具有非仿射非线性特性. 通过人工平动点处线性化获得的线性系统可完成太阳帆航天器轨道保持控制器的分析与设计. 由于线性近似模型为有误差模型, 存在近似有效范围约束, 表现为轨道高度约束和姿态角幅值约束. 本文研究了姿态角幅值约束对线性近似模型有效性的影响, 通过计算给出满足近似误差要求的姿态角幅值约束. 当控制输入存在幅值约束时, 控制器轨道修正能力受到束缚. 通过研究姿态角幅值约束下的最大允许入轨误差, 设计了最大允许入轨误差下线性二次型调节器(LQR)用于轨道保持控制, 并将控制器应用于太阳帆日地三体系统非线性模型中, 实现了日地人工L₁点Lissajous轨道最大允许入轨误差的控制收敛和良好精度下的轨道保持控制.      

Three dimensional temperature field in a conducting sphere due to an arbitrarily located split ring heating source

Thermal control of spacecrafts plays an important role in space missions. In the design stage the preliminary thermal analysis of the spacecraft requires an estimate of the conductive thermal resistance between the various spacecraft components. With this in mind, the fully three dimensional problem of determining the thermal field in a conducting sphere with an asymmetric split ring current carrying heating source is resolved in an analytical or almost analytical form, implying either a closed form solution or utmost expressions involving a simple numerical integration. This has immediate application for evaluation of thermal resistance in spacecrafts. Green's function integral techniques are used. Comparisons are made with series solutions and also with purely numerical solutions to contrast the simplicity and highlight the elegance of the present method. Parametric studies reveal expected behavior.     

Tropospheric wet refractivity tomography using multiplicative algebraic reconstruction technique

Algebraic reconstruction techniques (ART) have been successfully used to reconstruct the total electron content (TEC) of the ionosphere and in recent years be tentatively used in tropospheric wet refractivity and water vapor tomography in the ground-based GNSS technology. The previous research on ART used in tropospheric water vapor tomography focused on the convergence and relaxation parameters for various algebraic reconstruction techniques and rarely discussed the impact of Gaussian constraints and initial field on the iteration results. The existing accuracy evaluation parameters calculated from slant wet delay can only evaluate the resultant precision of the voxels penetrated by slant paths and cannot evaluate that of the voxels not penetrated by any slant path. The paper proposes two new statistical parameters Bias and RMS, calculated from wet refractivity of the total voxels, to improve the deficiencies of existing evaluation parameters and then discusses the effect of the Gaussian constraints and initial field on the convergence and tomography results in multiplicative algebraic reconstruction technique (MART) to reconstruct the 4D tropospheric wet refractivity field using simulation method.     

Traveling ionospheric disturbances observed at South African midlatitudes during the 29–31 October 2003 geomagnetically disturbed period

This paper presents traveling ionospheric disturbances (TIDs) observations from GPS measurements over the South African region during the geomagnetically disturbed period of 29–31 October 2003. Two receiver arrays, which were along two distinct longitudinal sectors of about 18°-20° and 27°-28° were used in order to investigate the amplitude, periods and virtual propagation characteristics of the storm induced ionospheric disturbances. The study revealed a large sudden TEC increase on 28 October 2003, the day before the first of the two major storms studied here, that was recorded simultaneously by all the receivers used. This pre-storm enhancement was linked to an X-class solar flare, auroral/magnetospheric activities and vertical plasma drift, based on the behaviour of the geomagnetic storm and auroral indices as well as strong equatorial electrojet. Diurnal trends of the TEC and foF2 measurements revealed that the geomagnetic storm caused a negative ionospheric storm; these parameters were depleted between 29 and 31 October 2003. Large scale traveling ionospheric disturbances were observed on the days of the geomagnetic storms (29 and 31 October 2003), using line-of-sight vertical TEC (vTEC) measurements from individual satellites. Amplitude and dominant periods of these structures varied between 0.08–2.16 TECU, and 1.07–2.13 h respectively. The wave structures were observed to propagate towards the equator with velocities between 587.04 and 1635.09 m/s.     

空间碎片超高速碰撞数值模拟的SPH方法

利用光滑质点动力学SPH(Smoothed Particle Hydrodynamics)方法对Whipple防护结构在空间碎片超高速碰撞下的物理过程进行了数值模拟.在数值模拟中,为了充分发挥SPH方法和有限元方法FEM(Finite Element Method)的优点,利用有限元单元和SPH节点混合建模,将有限元单元和SPH节点(SPH nodes)通过定义接触条件相结合,在大变形和飞溅区域采用SPH节点建模,而小变形区域则采用有限元单元建模,从而大大节省求解时间,提高计算效率.计算结果表明,弹丸在穿透前板后,形成二次碎片,碎片云经膨胀和拉长,对后板造成轻微的损伤,这和文献的相关试验数据是符合的.利用SPH方法对空间碎片的超高速碰撞过程进行数值模拟,不仅很好地预测了Whipple防护结构的破坏情况,而且对整个碰撞过程,包括碎片云的形成、膨胀和拉长过程都有形象的描述,符合超高速碰撞的试验测试结果.     

光伏发电系统中高升压比DC-DC变换器

光伏发电作为太阳能的重要应用方式正受到越来越广泛的关注,普遍采用前级DC-DC变换和后级逆变的结构。单相逆变器的输出电压通常为220 V(AC),这就要求前级DC-DC变换器具有很高的升压比。由于单级式DC-DC变换器难以满足要求,本文采用Boost变换器加ZVS全桥直流变压器的两级式结构。针对ZVS全桥直流变压器的不足,将LLC谐振网络应用于全桥直流变压器电路,提出了一种全桥LLC谐振直流变压器,从而实现整个负载范围内开关管的ZVS和整流二极管的ZCS。最后,分别制作了两台1 kW的原理样机进行实验验证,实验结果验证了理论分析的正确性。     

飞机着陆进近穿越风切变的轨迹响应

大气紊流和风切变对飞行活动影响较大,尤以低空风切变危害最大,严重威胁着民航飞行的安全。鉴于飞行器对抗大气扰动的实际能力有限,正确的飞行对策是回避或改出危险的大气扰动区。本文对某训练飞机着陆进近遭遇风切变时飞机轨迹的变化进行了模拟仿真计算。结果表明,采用恒定迎角策略,即采用最大允许迎角（抖动迎角）和最大油门时,改出效果最佳。同时计算出了某训练飞机在水平风为0时,所能抵抗的最大垂直阵风强度;以及在垂直阵风为0时,所能抵抗的最大水平风强度。     

数字通信系统信噪比参数的测量方法比较

针对数字通信系统中常见的信噪比参数E_b/N₀,本文从功率测量、功率谱密度测量及矢量分析三个角度出发,分别给出了该参数的测量原理与方法,并通过具体测量实验比较了三种测量方法的各优缺点,对于该参数的实际工程测量具有一定指导意义。     

高温磁悬浮轴承励磁绕组制造技术

针对国内外高温励磁绕组存在的缺陷与不足,提出了一种新型的迷宫形励磁绕组结构,首先通过电火花线切割制造出单层迷宫形线圈,并在线圈匝间和层间充分均匀地填充耐高温绝缘材料;然后通过真空钎焊工艺实现多层迷宫形线圈的牢固焊接,最后将焊接成型的多层线圈封装成迷宫形绕组,并应用于单自由度高温磁悬浮轴承试验台中,实现了550℃被悬浮物体近20h的稳定悬浮.研究结果表明:线圈焊缝的高温电阻值小,抗剪切强度满足要求,焊缝的金相组织致密均匀;绕组匝间和层间绝缘性能良好;迷宫形励磁绕组在原理和工艺上是可行的.对高温悬浮试验后的迷宫形绕组内部形貌进行观察后发现封装线圈的高温绝缘材料存在一定的缺陷,有待进一步研究.      

空间真空环境下密封电磁继电器的触点失效研究

密封电磁继电器有其固有的漏率,在应用于空间真空环境下由于气体泄漏使得其内部气体压力逐渐降低,导致继电器的触点在低气压环境下工作失效（负载切换时）。文章选择国产继电器样品对上述机理进行了试验验证,并对继电器内部气体压力与触点电弧失效的规律进行了研究。