Small satellite survey mission to the second Earth moon

This paper presents an innovative space mission devoted to the survey of the small Earth companion asteroid by means of nano platforms. Also known as the second Earth moon, Cruithne, is the target identified for the mission. Both the trajectory to reach the target and a preliminary spacecraft budget are here detailed. The idea is to exploit high efficient ion thrusters to reduce the propellant mass fraction in such a high total impulse mission (of the order of 1e6 Ns). This approach allows for a 100 kg class spacecraft with a very small Earth escape energy (5 km²/s²) to reach the destination in about 320 days. The 31% propellant mass fraction allows for a payload mass fraction of the order of 8% and this is sufficient to embark on such a small spacecraft a couple of nano-satellites deployed once at the target to carry out a complete survey of the asteroid. Two 2U Cubesats are here considered as representative payload, but also other scientific payloads or different platforms might be considered according with the specific mission needs. The small spacecraft used to transfer these to the target guarantees the manoeuvre capabilities during the interplanetary journey, the protection against radiations along the path and the telecommunication relay functions for the data transmission with Earth stations. The approach outlined in the paper offers reliable solutions to the main issues associated with a deep space nano-satellite mission thus allowing the exploitation of distant targets by means of these tiny spacecraft. The study presents an innovative general strategy for the NEO observation and Cruithne is chosen as test bench. This target, however, mainly for its relevant inclination, requires a relatively large propellant mass fraction that can be reduced if low inclination asteroids are of interest. This might increase the payload mass fraction (e.g. additional Cubesats and/or additional scientific payloads on the main bus) for the same 100 kg class mission.     

小行星形貌测绘与表征技术

小行星表面形貌测绘是深空小行星探测的首要任务。提出了一种适应探测器抵近观测的立体视觉在线测绘小行星形貌的方法,即先由立体相机获得所摄重叠区的三维地形,再用前后立体模型的连接点将各个独立模型连成一个完整地形信息,经整体最小二乘平差,确定小行星的形貌模型及特征;同时提出了一种基于等值线分析的撞击坑特征提取方法,即通过提取、分析地形等值线识别出地形中撞击坑特征。实验结果显示,本文所构建的原型系统能够快速重建出探测区域的三维地形,并识别出地形中撞击坑特征,证明了所提方法具有实用性。     

碎石堆构造小行星表面地形分析与仿真验证

人类迄今对太阳系小天体开展的探测包括地基、天基远距离观测和"罗塞塔号""隼鸟号"等探测器的抵近观测、着陆取样等。对具有碎石堆构造特性的小行星表面地形特性进行研究,提出了一种生成小行星表面地形仿真模型的方法,建立石块生成模型,对影响地形构造的石块幂律分布规律进行实验模拟。根据小天体着陆段导航方法验证及表面操作执行机构验证需要,选择并仿真生成了5种典型地形。实验结果表明:按照本文方法生成的仿真地形与实际探测得到的小行星表面局部地形相比一致性较好,可用于近操作任务中的着陆机构验证和地形相对导航算法初步验证。     

湿陷性黄土地基中预制桩承台板设计

本文通过西北某厂房的桩基承台设计，阐述了温陷性黄土地基中预制桩承台板设计的有关问题及经济造价比较。     

桩筏基础沉降试验研究

本文对唐山市信息港工程进行沉降观测试验研究。沉降观测布设高程控制网点共5个,共观测6次,另外监测7次,实际观测13次。通过对沉降观测进行分析,从群桩沉降时间关系曲线可以看出,沉降的总趋势是沉降速率随时间的增长而衰减,最后趋于基本稳定,图中出现的沉降曲线上下波动,作者认为是由于群桩中各部分荷载的重新分配造成的。     

三体系统中引力拖车的偏置非开普勒轨道研究

为了研究太阳-小行星-引力拖车三体系统中引力拖车的轨道运动问题,采用柱坐标系下的Hill方程描述了三体系统中引力拖车的运动情况,应用平均化方法消除周期项的影响,得到平均偏置非开普勒轨道的表达式,并研究了轨道稳定性与引力拖车最大有效拉力等问题.研究表明:三体系统中,在小行星飞行方向（或反方向）上存在偏置非开普勒轨道;与二...     

A sample collector for robotic sample return missions II: Radiation tests

Sample return from small solar system objects is playing an increasingly important part in solar system exploration. Critical to such missions is a robust, simple, and economic sample collector. We have developed a collector such as this for near-Earth asteroid sample return missions that we have termed the Touch-and-Go Impregnable Pad (TGIP). The collector utilizes a silicone substrate that is pushed into the dust and gravel surface layer of the asteroid. As part of a systematic evaluation of the TGIP, we have investigated the resilience of this substrate to ionizing radiations. Several miniature versions of the collector, containing typically ∼3 g of the collection substrate, were exposed to 0.564 MeV beta particles from a ⁹⁰Sr source and a 6 MeV electron beam in a linear accelerator to simulate the wide range of energies of solar and galactic ionizing radiation. Various radiation levels up to eight times greater than expected on a six-year asteroid mission (in the case of beta radiation) and 50 times greater than expected (in the case of the 6 MeV electron radiation) were administered to the substrate. After irradiation, the efficiency of the substrate in collecting samples of mock regolith was compared with that of collectors that had not been irradiated. No difference beyond experimental uncertainty was observed and we suggest that the operational TGIP will not be affected adversely by radiation doses expected during a typical six-year inner solar system mission.     

RPC-IES: The Ion and Electron Sensor of the Rosetta Plasma Consortium

The ion and electron sensor (IES) is part of the Rosetta Plasma Consortium (RPC). The IES consists of two electrostatic plasma analyzers, one each for ions and electrons, which share a common entrance aperture. Each analyzer covers an energy/charge range from 1 eV/e to 22 keV/e with a resolution of 4%. Electrostatic deflection is used at the entrance aperture to achieve a field of view of 90°× 360° (2.8π sr). Angular resolution is 5°× 22.5° for electrons and 5°× 45° for ions with the sector containing the solar wind being further segmented to 5°× 5°. The three-dimensional plasma distributions obtained by IES will be used to investigate the interaction of the solar wind with asteroids Steins and Lutetia and the coma and nucleus of comet 67P/Churyumov–Gerasimenko (CG). In addition, photoelectron spectra obtained at these bodies will help determine their composition.     

On tethered sample and mooring systems near irregular asteroids

A tethered asteroid sample and mooring system is investigated in this paper. In this system the spacecraft is moored to the surface of an irregular asteroid such as 216 Kleopatra by using a rocket-propelled anchor with a cable. The rocket-propelled anchor is a kind of space penetrator, which can inject into asteroids at high speeds generated by its own rocket engine. It can be used to explore the interior structure of asteroids, and it can also be used as a sample collector. When the sampling mission is done, the sample can be pulled back to the spacecraft with the anchor. Using this method, the spacecraft can be kept in a safe region in which it cannot be trapped by the gravitational field of the asteroid. This work is concerned with the dynamics of the tethered system near irregular asteroids. First, a shape model and gravitational field model of irregular asteroids are built. Then, the configuration and the stability of the tethered system are investigated, and the quasi-periodic motion near the equilibrium point of the tethered system is analyzed. Finally, the non-uniform density distribution of the asteroids is considered. The deployment process and the oscillation of the tethered system in the uncertain asteroid gravity field are simulated using the Monte Carlo method. The feasibility of the tethered asteroid sample and mooring system is proved.     

双小行星系统引力场建模方法研究

针对弱引力双小行星系统的引力场建模问题,本文采用复杂度和精度依次递增的球体–球体模型、椭球体–球体模型和改进的限制性椭球体–椭球体模型来进行引力场建模,并分别采用椭圆积分以及无积分环节、计算效率高的二阶二次球谐函数来表征引力势,从而比较精确地刻画双小行星系统和探测器构成的限制性全三体问题的动力学模型;针对双小行星系统1999KW4,对其不同的引力场模型进行了仿真研究,分别给出了不同模型下的等效势能函数曲面及零速度曲线,比较了不同模型下的平动点位置坐标偏差。结果表明,二阶二次球谐函数计算引力势的椭球体-椭球体模型计算精度高,复杂程度低,计算量更少,计算速度更快,能够较精确的对双小行星系统进行引力场建模。