基于模型的转子系统不平衡量的估计

采用基于模型的方法对转子系统的不平衡量进行估计,首先记录初始状态下的振动信号,然后根据实时测得的不平衡响应信号,得出差值振动信号,联立转子系统的动力学方程,得出不平衡等效载荷,根据等效载荷,得出不平衡的位置、相位及大小.采用模态扩展技术实现由有限几个点的振动响应获取所需点上的响应.由于噪声的影响,提出了基于高斯小波的降噪方法.仿真与实验结果表明,这一方法能够比较准确地估计出转子系统的不平衡量.      

预爆管式脉冲爆震原型机试验研究

为了实现多循环吸气式脉冲爆震发动机（PDE）在较短距离内缓燃向爆震的转捩,降低主爆管通过障碍物触发爆震的内部阻力损失,设计了预爆管和主爆管以同种混气（汽油/空气）为工作介质的两相PDE原型机,试验研究了爆震燃烧过程。研究表明：当预爆管出口扩张角度为45°时,可以实现爆震波在主爆管内向衍射面上、下游传播;设计的预爆管式PDE原型机可以实现最高频率为66.7 Hz的稳定间歇工作。     

分布式网络技术在燃气轮机性能测试系统中的应用

分析了分布式网络系统及燃气轮机性能测试系统的结构特点,描述了基于系统级、子系统级和工作站级的分布式测试系统的3级结构模型.     

软件无线电的可重构流处理器体系结构

 针对软件无线电中存在通用数字信号处理器（DSP）计算能力不足以及专用基带处理器缺乏扩展性的问题,提出了一种新的处理器：面向软件无线电的可重构流处理器及相应的专用指令集。仿真证明,该处理器的可重构设计具备指令集扩展能力,可以对多种无线通信标准甚至是新的通信标准提供支持;面向软件无线电的流体系结构和专用指令集保证了对多种高速无线基带信号的实时处理,运算能力是通用DSP的5~13倍。该处理器为软件无线电中的硬件设计难题提供了一种新的解决途径。     

孔间距和前倾角对进出口扩张形气膜孔流量系数的影响(英文)

Discharge coefficients of 3-in-1 hole of three inclination angles and three spacing between holes are presented which described the discharge behavior of a row of holes. The inlet and outlet of the 3-in-1 hole both have a 15° lateral expansion. The flow conditions considered are mainstream turbulence intensities and density ratios of secondary flow to mainstream. The momentum flux ratios varied in the range from 1 to 4. The comparison is made of the discharge coefficients of three shaped holes to find an optimal hole with low flow loss. The results show that the discharge coefficients of 3-in- 1 hole are highest in three shaped holes and therefore this article is focused on the measurements of discharge coefficients of 3-in-1 hole for various geometries and aerodynamic parameters. The measured results of 3-in-1 hole indicate that turbulence intensities, density ratios and momentum flux ratios have weak influence on discharge coefficients for inclination angle of 20°. The high turbulence intensity yields the small discharge coefficients for inclination angle of 45° and 90°. The increased both momentum flux ratios and density ratios lead to the increased discharge coefficients for inclination angle of 45° and 90°. The increased inclination angle causes the rapidly increased discharge coefficients. There is a weak dependence of discharge coefficients on hole pitches.     

用于某重型燃气轮机的气体流量试验器研制

阐述了自行研制的某型气体流量试验器的设计思路、系统组成、构件选择以及相关试验.该试验器用于国家863重大项目R0110重型燃机燃烧室喷嘴气体流量测量.该试验器巧妙地将测量系统、操作系统、数据显示、采集与处理系统结合在一起,不仅使设备结构紧凑,占地空间小,实现了单人操作完成试验,并且进气调节系统、冷却器、加温器各成单元便于拆装、运输以及检修、更换.试验器运行稳定,测量精确,成为一种通用高精度气体流量试验系统,可广泛应用于航空发动机、地面燃气轮机和燃用气体燃料的动力装置的喷嘴流量测量.     

Foreign Object Damage to Fan Rotor Blades of Aeroengine Part Ⅱ： Numerical Simulation of Bird Impact

Bird impact is one of the most dangerous threats to flight safety. The consequences of bird impact can be severe and, therefore, the aircraft components have to be certified for a proven level of bird impact resistance before being put into service. The fan rotor blades of aeroengine are the components being easily impacted by birds. It is necessary to ensure that the fan rotor blades should have adequate resistance against the bird impact, to reduce the flying accidents caused by bird impacts. Using the contacting-impacting algorithm, the numerical simulation is carded out to simulate bird impact. A three-blade computational model is set up for the fan rotor blade having shrouds. The transient response curves of the points corresponding to measured points in experiments, displacements and equivalent stresses on the blades are obtained during the simulation. From the comparison of the transient response curves obtained from numerical simulation with that obtained from experiments, it can be found that the variations in measured points and the corresponding points of simulation are basically the same. The deforming process, the maximum displacements and the maximum equivalent stresses on blades are analyzed. The numerical simulation verifies and complements the experiment results.     

中国区域多机场系统旅客吞吐量预测方法研究

随着航空运输业的发展,区域单一枢纽格局被打破,区域性枢纽和次枢纽逐渐形成,进而产生区域多机场系统。对影响旅客在区域多机场系统中选择机场时的主要因素进行了分析,并以上海、杭州为中心的区域多机场系统为例,根据旅客选择机场的偏好,确定了三方面主要影响因素——机场的航班状况、航空运输票价水平和机场服务质量,运用多项式logit（MNL）模型对区域多机场系统中各机场分担率,以及相应旅客吞吐量的预测方法进行了研究,为未来机场预测体系的建立提供了定量分析的方法和思路。     

弹箭气动力计算软件管理系统(英文)

针对反坦克导弹、低阻远程榴弹、杆式头部破甲弹、大长细比尾翼火箭弹、地空导弹、普通榴弹、脱壳穿甲弹、航空炸弹、空地导弹、超远程滑翔炮弹、航空布撒器等11个弹种研制和开发了一套工程实用、操作简便、界面友好的弹箭空气动力计算软件管理系统.本文介绍了该系统的控制系统、前置处理系统、后置处理系统和数据库系统所采用的主要技术和所实现的重要功能.     

航空发动机滑油综合监控中的磨损故障融合诊断研究

单一的滑油光谱监控手段容易漏报航空发动机磨损故障.根据滑油光谱监控和自动磨粒检测互补的特点,在某型航空发动机上实施滑油综合监控,应用Dempster-Shafer(D-S)证据理论实现发动机磨损故障的融合诊断,并开发出基于上述监控方法和信息融合诊断的滑油监控专家系统.通过对实际诊断案例进行分析,结果表明:提出的滑油综合监控和融合诊断方法可有效解决该型发动机轴承故障预报的难题.