基于接触状态的叶冠预扭设计

针对某工程的实际问题,建立了叶片三维分析模型,应用谐波平衡法和时频转换法,分析了叶冠结构参数与安装状态下叶冠力学性能的关系,总结了叶冠几何参数对接触状态的影响规律;就叶冠接触状态与叶冠磨损之间的关系进行了讨论;基于接触状态的设计理论,提出了叶冠预扭设计基本思想和工程方法.     

机动目标拦截末制导状态估计器的误差特性

 针对大机动目标拦截问题,分析了末制导阶段目标机动条件下状态估计器的误差特性。首先将目标机动输入未知时的状态估计器模型表示为一随机线性混合系统,当混合系统的模式跳变事件满足可观测性条件时,模式决策过程可等效为真实模式的延迟;随后推导了模式决策延迟条件下估计误差的动态方程与传递函数,并得到了一定误差要求下模式决策延迟的上界与目标机动模式逗留时间的下界;最后通过空空导弹拦截高速战机的典型实例验证了该理论分析的正确性。研究结果为设计此类线性混合系统估计器提供了理论依据。     

多传感器组合导航系统的改进多尺度滤波算法

多尺度滤波算法在多传感器组合导航系统中已得到成功应用，然而该算法用到多个时刻的量测向量，导致算法计算量过大，并影响系统的实时性。针对上述问题，首先利用分块技术与小波变换将时域内描述的系统原始状态方程转换为块状态方程，然后将实时得到的当前时刻的量测向量表达为块状态向量的形式，最后结合常规卡尔曼滤波技术与序贯滤波的思想，提出了一种改进的多传感器组合导航系统多尺度滤波方法。将该算法应用于GPS/SST/SINS多传感器组合导航系统，仿真结果验证了该算法不仅具有较好的实时性，而且相对于传统算法,系统的定位精度提高1倍以上。     

无刷直流电机的模型预测与反演控制

为提高永磁无刷直流电机的控制精度、负载工作能力和响应速度，分析了电机的电气特性与机械特性，建立了连续时间系统下状态空间形式的电机模型，得到了电机转角、转速受控变化的规律;在离散时间控制系统中，采用了状态转移模型预测和估计系统误差，根据电机转动规律反演控制指令，提出了一种基于模型预测与反演，对电机转速、转角进行独立/联合控制的方法;在考虑工程实际应用中电机存在参数、测量等误差的情况下，与PID控制、滑模控制方法进行了负载情况下典型工况的对比仿真。仿真表明:所设计的控制器具有较好的控制精度、响应速度和鲁棒性。     

RadioAstron orbit determination and evaluation of its results using correlation of space-VLBI observations

A crucial part of a space mission for very-long baseline interferometery (VLBI), which is the technique capable of providing the highest resolution images in astronomy, is orbit determination of the mission’s space radio telescope(s). In order to successfully detect interference fringes that result from correlation of the signals recorded by a ground-based and a space-borne radio telescope, the propagation delays experienced in the near-Earth space by radio waves emitted by the source and the relativity effects on each telescope’s clock need to be evaluated, which requires accurate knowledge of position and velocity of the space radio telescope. In this paper we describe our approach to orbit determination (OD) of the RadioAstron spacecraft of the RadioAstron space-VLBI mission. Determining RadioAstron’s orbit is complicated due to several factors: strong solar radiation pressure, a highly eccentric orbit, and frequent orbit perturbations caused by the attitude control system. We show that in order to maintain the OD accuracy required for processing space-VLBI observations at cm-wavelengths it is required to take into account the additional data on thruster firings, reaction wheel rotation rates, and attitude of the spacecraft. We also investigate into using the unique orbit data available only for a space-VLBI spacecraft, i.e. the residual delays and delay rates that result from VLBI data processing, as a means to evaluate the achieved OD accuracy. We present the results of the first experience of OD accuracy evaluation of this kind, using more than 5000 residual values obtained as a result of space-VLBI observations performed over 7 years of the RadioAstron mission operations.     

Sea state parameters retrieval from cross-polarization Gaofen-3 SAR data

Chinese Gaofen-3 (GF-3) synthetic aperture radar (SAR) acquired in wave mode (WV) and quad-polarization stripmap (QPS) mode default operates in quad-polarization (vertical–vertical (VV), vertical-horizontal (VH), horizontal-horizontal (HH) and horizontal-vertical (HV)) modes. To date, more than GF-3 SAR vignettes following about 110 orbits acquired in WV and QPS mode have been recorded during the mission from April 2016 to December 2017. In the vignettes, ocean surface waves signatures, that are wave-look patterns, are visible in cross-polarization (basically VH). These vignettes are collocated with surface sea state parameters simulated from numerical WAVEWATCH-III (WW3) wave model using a 0.1° grid. There are 11,269 matchups available for studying the relation between sea state parameters and SAR-derived parameters in VH-polarization. A well-known empirical CWAVE model, herein renamed as CPCWAVE_GF3, is adopted for sea state parameter retrieval from GF-3 SAR vignettes with the SAR parameters in the cross-polarization channel. The method yielded a significant correlation coefficient (COR) of 0.79 for wave height (SWH) and 0.72 for second-order cross-zero mean wave period (MWP). Validation against 76 moored buoys resulted in a 0.49 m RMSE of SWH with a 0.21 m scatter index (SI) and validation against 71 moored buoys resulted in a 1.01 s RMSE of MWP with a 0.13 s SI. The comparison of SWH with 116 footprints from the altimeter of Jason-2 also shows a 0.46 m RMSE of SWH with a 0.19 m SI. Our work demonstrates the feasibility of wave retrieval from GF-3 SAR using cross-polarization channels parameters.     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

采用单目视觉的非合作目标星状态估计

针对微小卫星逼近观测未知的空间翻滚非合作目标星任务，提出一种基于单目视觉的目标星相对状态估计方法。在建立追踪星/目标星相对运动模型的基础上，以单目相机识别并测量获得的目标星固有特征的像素位置为观测输入，通过扩展卡尔曼滤波算法实现对目标星相对位置、相对速度、相对姿态、角速度、惯量比和特征位置等状态的估计。仿真结果表明,该方法能够很好地实现对未知非合作目标星的相对状态估计，姿态估计误差小于2°，位置估计误差小于0.1 m，特征点位置平均估计误差小于0.04 m。     

基于状态空间模型的无刷直流电机控制器设计

在无刷直流时机的位置伺服系统中，采用了基于状态空间模型的优化设计方法，综合出了次优控制器、建立了广义误差系统状态方程，并利用积分罚函数分段一经法处理伺服系统不等式约束的问题，得出了次优控制算法，经仿真证实，有杉该优化方法设计出的伺服系统的稳态跟踪误差为零；稳成输出不受阶跃干扰的影响；并具有期望的瞬态响应特性。     

关于约束分类问题的研究

约束条件的分类对于简化数学规划问题的求解具有重要意义，对于凸函数ｇｉ（ｘ）（ｉ＝１，２，…，ｎ）给出了约束ｇｉ（ｘ）≤０是必要约束或多余约束的充要条件，对于一般约束，定义了约束相关矩阵，给出了约束是必要的或多余的充要条件，对相对多余约束给出了分类。