Upgrading CCIR's foF2 maps using available ionosondes and genetic algorithms

We have developed a new approach towards a new database of the ionospheric parameter $f_{o}F2$. This parameter, being the frequency of the maximum of the ionospheric electronic density profile and its main modeller, is of great interest not only in atmospheric studies but also in the realm of radio propagation. The current databases, generated by CCIR (Committee Consultative for Ionospheric Radiowave propagation) and URSI (International Union of Radio Science), and used by the IRI (International Reference Ionosphere) model, are based on Fourier expansions and have been built in the 60s from the available ionosondes at that time. The main goal of this work is to upgrade the databases by using new available ionosonde data. To this end we used the IRI diurnal/spherical expansions to represent the $f_{o}F2$ variability, and computed its coefficients by means of a genetic algorithm (GA). In order to test the performance of the proposed methodology, we applied it to the South American region with data obtained by RAPEAS (Red Argentina para el Estudio de la Atmósfera Superior, i.e. Argentine Network for the Study of the Upper Atmosphere) during the years 1958–2009. The new GA coefficients provide a global better fit of the IRI model to the observed $f_{o}F2$ than the CCIR coefficients. Since the same formulae and the same number of coefficients were used, the overall integrity of IRI’s typical ionospheric feature representation was preserved. The best improvements with respect to CCIR are obtained at low solar activities, at large (in absolute value) modip latitudes, and at night-time. The new method is flexible in the sense that can be applied either globally or regionally. It is also very easy to recompute the coefficients when new data is available. The computation of a third set of coefficients corresponding to days of medium solar activity in order to avoid the interpolation between low and high activities is suggested. The same procedure as for $f_{o}F2$ can be perfomed to obtain the ionospheric parameter M(3000)F2.     

航空发动机机匣摆线粗加工轨迹规划方法

针对机匣零件粗加工过程中凸台多、加工余量大、材料难切削、刀具磨损快、加工周期长等特点,提出了一种机匣摆线粗加工刀具轨迹规划方法,该方法能有效控制切削过程中刀具负载的变化,改善刀具切削过程中的加热-冷却循环,减缓刀具的磨损,提高机匣粗加工效率。首先,通过对两种摆线模型的分析,建立了摆线铣数学模型,并分析了摆线铣的优缺点;其次,结合机匣零件特点,将模型在精度范围内离散为点模型,利用圆锥将模型展开并建立展开模型与原始模型间的映射关系。通过对可加工区域的划分和平面逼近,生成了适用于机匣零件的摆线粗加工刀具轨迹。最后,分别通过摆线铣刀具磨损实验、平面型腔摆线铣实验和机匣摆线铣实验,验证了摆线铣在降低刀具磨损、延长刀具寿命方面的有效性,以及本文轨迹生成算法在航空发动机机匣实际加工中的正确性和高效性。研究成果能有效缩短加工周期、降低加工成本,提升机匣零件的粗加工效率。     

空间科学任务协同设计论证平台

空间科学任务协同设计论证存在设计方案耦合强,数据一致性差,数据变更难,数据与流程脱节等问题.为了解决上述问题,建立了典型空间科学任务的多层数字化模型;采用图形化方式对论证流程进行建模,并建立流程与数据的映射关系;通过共享数据池的方式为多岗位用户提供多方案数据协同机制;采用消息总线对数据变更进行及时提醒;利用方案依赖关系矩阵来判别方案耦合关系,最终自动合并任务总体设计方案.作为一个分布式平台,空间科学任务协同设计平台采用Eclipse RCP和Spring技术架构,整合了Hibernate、工作流Activiti5等中间件,提供统一门户,支持多岗位、多任务、多方案、多版本的管理能力,提供论证流程监控、数据协同交互等功能.结合某空间科学任务论证验证了该平台的有效性.      

某支线飞机概念设计阶段机翼气动弹性设计

在飞机的总体方案概念设计阶段,需要对飞机机翼进行气动弹性设计,以避免在后期设计中,因气动弹性问题而对设计方案进行较大更改.以某支线飞机的总体方案论证为背景,研究并归纳该飞机概念设计阶段气动弹性设计与分析的理论基础和计算方法,建立机翼的梁架式模型,初步设计模型刚度与质量分布,并进行机翼的静气动弹性响应与载荷分析、振动特性及颤振特性分析.结果表明:该支线飞机机翼的气动弹性特性合理,符合设计要求.     

Investigation of ionospheric response to two moderate geomagnetic storms using GPS–TEC measurements in the South American and African sectors during the ascending phase of solar cycle 24

The responses of the ionospheric F region using GPS–TEC measurements during two moderate geomagnetic storms at equatorial, low-, and mid-latitude regions over the South American and African sectors in May 2010, during the ascending phase of solar cycle 24, are investigated. The first moderate geomagnetic storm studied reached a minimum Dst value of −64 nT at 1500 UT on 02 May 2010 and the second moderate geomagnetic storm reached a minimum Dst value of −85 nT at 1400 UT on 29 May 2010. In this paper, we present vertical total electron content (VTEC) and phase fluctuations (in TECU/min) from Global Positioning System (GPS) observations from the equatorial to mid-latitude regions in the South American and African sectors. Our results obtained during these two moderate geomagnetic storms from both sectors show significant positive ionospheric storms during daytime hours at the equatorial, low-, and mid-latitude regions during the main and recovery phases of the storms. The thermospheric wind circulation change towards the equator is a strong indicator that suggests an important mechanism is responsible for these positive phases at these regions. A pre-storm event that was observed in the African sector from low- to the mid-latitude regions on 01 May 2010 was absent in the South American sector. This study also showed that there was no generation or suppression of ionospheric irregularities by storm events. Therefore, knowledge about the suppression and generation of ionospheric irregularities during moderate geomagnetic storms is still unclear.     

基于多源卫星融合资料的中国近海海洋锋检测研究

海洋锋是海洋动力学中重要的研究对象.目前主要利用卫星遥感海面温度数据分析海洋锋.由于夏季中国近海海域海面温度趋同特性,无法利用海面温度数据分析海洋锋,而卫星遥感海色数据可以有效弥补海面温度检测海洋锋的不足,提高海洋锋检测的准确性.基于多源卫星融合数据,利用梯度检测算法对中国近海海域进行海洋锋研究,结合海面温度和蓝绿波段...     

太阳活动低年低纬地区VTEC 变化特性分析

利用福州台站(26.1°N, 119.3°E, 磁纬14.4°N)电离层闪烁与TEC监测仪2006-2010年的观测数据, 对该地区垂直总电子含量(VTEC)进行时间变化特性分析. 结果表明, 春秋冬三季的VTEC平均最高值出现在06:00UT, 夏季出现在08:00UT, 所有季节的平均最低值均出现在21:00UT; VTEC变化存在季节异常和弱冬季异常, 春秋季节高, 冬夏季节低, 夏季VTEC比冬季低且最大值出现时间延迟; VTEC在2006-2009年呈现下降的变化趋势, 2010年开始增强, 年际变化与太阳活动及地磁活动变化趋势具有较好的对应关系; VTEC变化与太阳活动存在很好的相关性, 相关系数达到0.5以上, 地磁活动则显示了弱相关的特性; F_10.7与VTEC的相关性随着每天Kp指数总值Σ_kp的增大而减小.      

磁暴对赤道地区L波段电离层闪烁的影响研究

利用赤道地区Vamimo站闪烁数据, 选取两次典型大磁暴时段重点分析, 对比磁暴发生前、发生时以及发生后连续几天电离层幅度闪烁强度和发生率的变化, 引入瑞利elax-elax泰勒不稳定性(Rayleigh-Taylor, R-T不稳定性)线性增长率γ₀, 对磁暴影响闪烁的机制进行初步探讨. 结果表明, 磁暴可能触发闪烁发生, 也可能抑制闪烁发生, 这既与观测季节有关, 也与磁暴不同发展阶段的地方时有关. 触发发生于闪烁少发季节磁暴主相所在的午夜至黎明时段, 可能是磁层穿透电离层的东向电场所致; 抑制发生于闪烁多发季节磁暴恢复相所在的午夜前时段, 可能是西向电场作用的结果. 磁暴发生时的电场变化可能是抑制或触发闪烁的主导因素, 但仍需进一步分析研究.      

行星齿轮非线性振动系统参数稳定域的计算方法

研究了行星齿轮非线性传动系统参数稳定域计算的一般方法.该方法通过选取合理的失稳阀值,根据考查参数域内系统的运动状态选取合适的数值积分时间段,以循环套嵌的手段计算考查参数在各自范围内不同组合下的系统位移响应最大值,比较失稳阀值以判稳,参数稳定域的图形输出等5个步骤完成对行星轮系参数稳定域的计算.最后,以四自由度行星轮系纯扭转非线性振动模型为例,以行星轮输入转速、系统的齿侧间隙以及齿轮副的啮合阻尼系数为考查参数,分别计算得到了系统的单参数稳定域、双参数稳定域以及三参数稳定域,为行星轮系的设计取值提供了重要参考.      

可调静子旋转凸台位置对端区流动的影响

对包含凸台的可调静子模型进行简化,研究了不同凸台位置对端区流动的影响.通过实验测量与数值模拟对比可以发现:可调静子端区流动损失主要是由叶片气动负荷引起的泄漏及气流绕过凸台造成的掺混2个部分组成;通过合理优化设计,将凸台置于气动负荷高的叶片前缘并覆盖尽可能多的前缘间隙,能够有效降低损失,改善气动性能.