高精度法矢下切割面自适应的凸曲面射线寻迹

针对电大尺寸目标难以精确解析表达带来的一致性几何绕射算法应用难问题,提出了基于三角网格、适用于任意凸曲面的射线寻迹（TM-tracing）算法。应用工程中较易获取的三角网格及其协议,设计了一种满足快速多边搜索条件的网状数据存储链表;提出了满足寻迹要求的高精度法矢求解算法;采用切割面自适应调整的弧形拟合寻迹方法实现了爬行波寻迹算法;结合一致性几何绕射理论（UTD）实现了暗区场值求解算法。任意网格曲面射线寻迹结果表明:本文提出的寻迹算法适用于包括球、柱和锥在内的任意光滑凸曲面,寻迹偏差小于1.61%,寻迹速度为2.8 s,具有一定的工程应用价值。      

聚焦光场成像三维粒子场重建方法

层析重建是层析粒子图像测速(Tomo-PIV)技术实现三维粒子位置和强度信息(三维粒子场)重构的核心步骤。相比于多相机的Tomo-PIV技术,单聚焦光场相机通过一次成像能够同时采集示踪粒子的散射光的方向和位置信息。因此,提出一种单聚焦光场相机的层析重建技术用于重构流场中的三维粒子场信息。为了验证本文方法的可行性及准确性,利用几何光学建立了示踪粒子的光场成像模型,利用光线追迹技术计算了粒子在聚焦光场相机中的成像,对比了被测流场中位于不同深度位置的粒子在聚焦光场相机中的成像差异;建立了基于单聚焦光场相机的层析重建数学模型,利用乘法代数重构技术(MART)对模拟所得的光场图像进行反演计算,实现了三维粒子场的重构,并利用归一化互相关系数来表征粒子的重建质量。结果表明,单个粒子在Z轴方向上的位置精度为±0.35 mm,初步证明了基于聚焦光场成像理论的三维粒子场重建方法的可行性。     

Sunspot activity and cosmic ray modulation at 1 a.u. for 1900–2013

The descent of sunspot cycle 23 to an unprecedented minimum of long duration in 2006–2009 led to a prolonged galactic cosmic ray (GCR) recovery to the highest level observed in the instrumental era for a variety of energetic charged particle species on Earth, over a wide range of rigidities. The remarkable GCR increase measured by several ground-based, balloon-borne, and detectors on a satellite is described and discussed. It is accompanied by a decrease in solar wind velocity and interplanetary magnetic field at 1 a.u., reaching the lowest values since measurements of the solar wind began in October 1963; the solar polar field strength (μT) measured at the Wilcox Solar Observatory (WSO) is also significantly reduced compared to prior cycles since the start of the program in 1976, the polar field in the northern hemisphere reversed in June 2012 and again in February 2014, that in the southern hemisphere reversed in July 2013. If updates of WSO data confirm the second reversal in northern solar hemisphere, it would pose a serious challenge to the Dynamo Theory. The long-term change in solar behavior may have begun in 1992, perhaps earlier. The physical underpinnings of these solar changes need to be understood and their effect on GCR modulation processes clarified. The study discusses the recent phenomena in the context of GCR modulation since 1900. These happenings affected our empirical predictions for the key parameters for the next two sunspot cycles (they may be progressively less active than sunspot cycle 24) but it enhanced support for our prediction that solar activity is descending into a Dalton-like grand minimum in the middle of the twentyfirst century, reducing the frequency of the coronal mass ejections; they determine the space weather affecting the quality of life on Earth, radiation dose for hardware and human activities in space as well as the frequency of large Forbush decreases at 1 a.u.     

Mean energy of response to galactic cosmic ray spectrum: IMP 8 and Climax neutron monitor

Solar modulations of galactic cosmic ray (GCR) intensity contain a wealth of information about their transport in the heliosphere. To extract this information from the data one studies the dependence of the observed modulations on the mean energy of response of detectors providing data for the analyses. There is a great deal of confusion about the detector energy response to GCR spectrum in the literature. We present a preliminary report on the computations of the mean energy of response for the Climax neutron monitor (CL/NM) and IMP 8 cosmic ray nuclear composition instrument to GCR protons for 1973–1998, covering the solar cycles 21 and 22. We find that for penetrating proton channel on IMP 8 the mean energy changes by a factor of over two whereas for the neutron monitor the change is only 21%. However, the corresponding change for the computed modulation function is a factor of about 3.5.     

蛇形进气道的雷达截面分析

 本文采用复射线技术的原理和方法,通过场的高斯波束拟合,使这种理论能够用于进气道之类的大口径凹形腔体的雷达截面(RCS)特性分析。本文以弯曲的蛇形进气道为例,进行了RCS特性分析计算,并将计算值与测试值比较。结果表明,这种方法是一种比较准确而又十分有效的RCS预估方法。     

Galactic Wind: Mass Fractionation and Cosmic Ray Acceleration

The dynamical and chemical effects of the Galactic Wind are discussed. This wind is primarily driven by the pressure gradient of the Cosmic Rays. Assuming the latter to be accelerated in the Supernova Remnants of the disk which at the same time produce the Hot Interstellar Medium, it is argued that the gas removed by the wind is enriched in the nucleosynthesis products of Supernova explosions. Therefore the moderate mass loss through this wind should still be able to remove a substantial amount of metals, opening the way for stars to produce more metals than observed in the disk, by e.g. assuming a Salpeter-type stellar initial mass function beyond a few Solar masses. The wind also allows a global, physically appealing interpretation of Cosmic Ray propagation and escape from the Galaxy. In addition the spiral structure of the disk induces periodic pressure waves in the expanding wind that become a sawtooth shock wave train at large distances which can re-accelerate “knee” particles coming from the disk sources. This new Galactic Cosmic Ray component can reach energies of a few×10¹⁸ eV and may contribute to the juncture between the particles of Galactic and extragalactic origin in the observed overall Cosmic Ray spectrum.     

前后缘型线同时可控的乘波体设计

提出了一种前后缘型线同时可控的乘波体设计方法,在马赫数可控的外锥形曲面基准流场中,结合流线追踪技术和混合函数,实现了椭圆前缘转椭圆后缘的乘波体设计,并在设计点(Ma=6.0)和接力点(Ma=4.0)对其进行数值仿真研究。前后缘同时可控的乘波体在型面剧烈过渡处产生了较弱的激波,出口两侧存在高温高压区,后部对称面附近的激波形状由圆弧变为平直线且出口处流场基本均匀,非常有利于与进气道匹配设计。另外,该乘波体具有较高的容积率和预压缩效率,附面层修正后的容积率为0.24,设计点时乘波特性较好,接力点时前部完全乘波,具有较高的升阻比,有黏条件下设计点和接力点的升阻比分别为2.54和2.41。此外,与给定前缘的乘波体相比,其升力、阻力、俯仰力矩和出口增压比都有明显增加,但是升阻比和出口总压恢复系数有所降低,在设计点无黏升阻比由3.56降为3.00。以上研究表明,本文的设计方法可行且更加灵活,拓宽了乘波体的选择范围。     

光线追踪求交算法的研究及其实现

本文对光线追踪求交算法进行了深入讨论。文中结合形体设计实例说明了此算法的正确性和实用性。     

一种乘波前体进气道的一体化设计及性能分析

采用特征线方法设计了具有直线初始激波、内收缩段消除激波反射、出口参数均匀可控的基准内锥流场.基于密切内锥(osculating inward turning cone,OIC)乘波体设计方法,发展了一体化密切内锥乘波前体进气道(osculating inward turning cone waverider inlet,OICWI)设计技术.基于一体化基准内锥流场和前体进气道设计技术,设计了密切内锥乘波前体进气道.采用数值软件对设计的乘波前体进气道进行了仿真分析,结论如下:①OICWI的设计是遵循气动原理的.②一体化密切内锥乘波前体进气道的前缘形状、内收缩比及出口参数可以根据需求定量准确设计.③理论设计结果和模拟结果吻合一致,证明设计方法是正确可靠的.④数值模拟研究结果表明一体化密切内锥乘波前体进气道具有较好的出口流场均匀度及较高的流量捕获率和较高的总压恢复特性.      

强脉冲软X光喷射冲量的几种模拟加载技术

本文综合国内外相关文献，对强脉冲软X光喷射冲量的片炸药加载、光敏炸药加载、柔爆索加载、电子束加载、磁励飞板加载及磁压力加载等几种模拟技术的研究和应用情况进行了简要的介绍，并简要分析和评述了各种模拟技术的共同点和各自的优缺点。