脉冲式燃烧风洞起动特性数值研究

利用计算流体力学软件Fluent,采用隐式双时间步方法模拟非定常过程,控制方程的离散采用二阶迎风格式,湍流模型选择剪切应力输运(SST)k-ω模型,并求解组分扩散方程,对脉冲式燃烧风洞的起动过程进行了数值模拟,分析了喷管起动时流场结构的变化情况和自由射流区超声速流场的建立过程.计算结果为改进风洞起动特性提供了一定的参考依据.      

Estimation of differential code biases with Jason-2/3 onboard GPS observations

With the continuous deployment of Low Earth Orbit (LEO) satellites, the estimation of differential code biases (DCBs) based on GNSS observations from LEO has gained increasing attention. Previous studies on LEO-based DCB estimation are usually using the spherical symmetry ionosphere assumption (SSIA), in which a uniform electron density is assumed in a thick shell. In this study, we propose an approach (named the SHLEO method) to simultaneously estimate the satellite and LEO onboard receiver DCBs by modeling the distribution of the global plasmaspheric total electron content (PTEC) above the satellite orbit with a spherical harmonic (SH) function. Compared to the commonly used SSIA method, the SHLEO model improves the GPS satellite DCB estimation accuracy by 13.46% and the stability by 22.34%, respectively. Compared to the GPS satellite DCBs estimated based on the Jason-3-only observations, the accuracy and monthly stability of the satellite DCBs can be improved by 14.42% and 26.8% when both Jason-2 and Jason-3 onboard observations are jointly processed. Compared with the Jason-2 solutions, the GPS satellite DCB estimates based on the fusion of Jason-2 and Jason-3 observations have an improved consistency of better than 18.26% and 9.71% with the products provided by the Center for Orbit Determination in Europe (CODE) and Chinese Academy of Sciences (CAS). Taking the DCB products provided by the German Aerospace Center (DLR) as references, there is no improvement in accuracy of the GPS satellite DCB estimates based on the fusion of Jason-2 and Jason-3 observations than the Jason-2 solutions alone. A periodic variation is found in the time series of both the Jason-3 and Jason-2 onboard receiver DCB estimates. Preliminary analysis of the PTEC distribution based on the estimated SH coefficients are also presented.     

高精度非接触磁浮机构电磁干扰特性分析

针对因双超平台姿态控制引入非接触磁浮机构这一关键执行机构,而可能引起的卫星平台新的电磁兼容问题,开展了非接触磁浮机构的电磁干扰特性研究。首先,介绍了非接触磁浮机构及其驱动器的工作原理;其次,分别对非接触磁浮机构驱动器的脉冲宽度调制(PWM)控制信号高频干扰特性和传导电磁干扰特性进行了理论和仿真分析,并将其频率特性与星上其他典型单机的工作频率进行了比对。对比分析结果表明:非接触磁浮机构的电磁干扰频率与星上其他典型单机之间间隔较大,其相互之间产生的电磁干扰可忽略,磁浮机构的引入不会产生新的电磁兼容问题。     

基于贝叶斯模型的长码DS-CDMA信号扩频码与信息序列联合估计

 针对长码直接序列扩频码分多址(DS-CDMA)信号的盲解扩,在信号模型分析的基础上,提出了一种基于可逆跳跃的马尔可夫链蒙特卡罗(RJ-MCMC)扩频码和信息序列联合估计算法。该算法分别对建立的联合后验分布模型进行迭代抽样,并有效地在不同维数的子空间中跳转,从而构造一条马尔可夫链,使其平稳分布为待估参数的后验分布,最终拼接得到每个用户的完整扩频序列和信息序列估计。仿真结果表明:该方法在迭代二十几步时达到收敛;并且在功率相同和不同条件下,当信噪比(SNR)大于-9 dB时,估计序列与真实序列的相似度均超过0.95,信息序列的误码率低于0.01;同时算法对不同用户个数和不同调制样式具有较强的适应性,与Fast-ICA算法相比,估计性能平均提高了约3 dB。     

地基激光清除椭圆轨道空间碎片特性的计算分析

空间碎片对人类航天活动的危害很大,用高能激光减缓其危害性已受到广泛关注.针对地基激光清除椭圆轨道空间碎片问题,提出了单脉冲变轨和多脉冲变轨两种计算分析方法.仿真计算结果表明,碎片初始真近角在100°～150°附近降轨效果最佳;从激光器在地球表面可供布站的区域讲,在碎片真近角180°附近,布站区域最大;当推进激光总作用时间较短或作用距离较小时,单脉冲变轨计算模型和多脉冲变轨计算模型计算结果接近,因此可采用单脉冲变轨计算模型计算结果近似表示多脉冲作用效果.     

基于 MTF的潜航体尾迹 SAR成像仿真

基于水动力学理论和波流弱相互作用理论,运用波作用量谱平衡方程研究了潜航体的尾流场与表面波作用后的表面尾迹,探讨了采用传递变换函数实现表面尾迹SAR成像的可行性。研究表明,波作用量谱平衡方程能够较准确地计算出潜航体尾流场与表面波之间的非线性相互作用;传递变换函数能够快速有效实现海面后向散射系数到SAR图像的转换,且保证了较高的精度。     

Radial distribution of galactic cosmic rays at solar maximum

In this paper we analyze the spatial distribution of galactic cosmic rays during periods of maximum solar activity of the cycles 21, 22 and 23. We have used a two dimensional model to solve the cosmic ray transport equation. This model includes all relevant physical processes: diffusion, convection, drift and shock effects on cosmic ray propagation inside the heliosphere. We focused on the study of the radial distribution of galactic cosmic rays, and compare our results with the spacecraft observations for two energies (175 MeV H and 265 MeV/n He). Although the radial intensities of galactic cosmic rays can be explained qualitatively with all three local interstellar spectra (LISs) used in this work, we applied a reduced chi-squared analysis to investigate the best LIS that could fit the data.     

扭矩扳手检定仪中步进电机控制系统的设计

为达到扭矩扳手检定仪手动、自动和电子手轮控制要求，设计了以硬件电路为主的多功能步进电机控制系统，配合上位机及检定仪中的扭矩传感器、光电编码器，扭矩扳手检定仪可实现开环和闭环控制，控制系统除用于扭矩扳手检定仪控制外，还可用于步进电机驱动的位置和压力控制等设备中。     

Change in the rigidity dependence of the galactic cosmic ray modulation in 2008–2009

Observations of charged particle fluxes in the stratosphere of the polar regions represent the cosmic rays variations with energy above 100 MeV. At the end of 2009 these fluxes reached the highest level for the time of observations from mid 1957 and were by 17% higher than the previous extremum value of May 1965. In the mean time the ground-based neutron monitors showed the remarkably less count rate enhancement. These results argue for the significant change in the energy spectrum of incoming particles in 2008–2009 in the energy range of ∼100–1500 MeV/n.     

波音737NG飞机冲压空气系统控制原理及常见故障分析

简要介绍了冲压空气系统的组成和原理，着重分析了系统是如何通过电路设计实现不同的工作模式，以及不同模式下系统各部件的工作状态，最后就系统常见故障和MEL放行进行了简单说明。