一种基于数字信号处理的阻抗参数测量新方法

利用数字信号处理理论与技术提出了一种阻抗参数测量新方法,即采用任意的周期信号作为测量的激励信号,激励信号的信噪比可以很低;采用高镜频抑制比的数字正交采样滤波器得到被测阻抗和标准阻抗上的电压采样序列的同相分量与正交分量,并据此确定被测阻抗参数,该方法能得到较高的阻抗参数测量精度和较宽的测量范围,并且硬件电路实现比较容易.文中给出了计算机仿真分析和硬件实现系统的实验结果,证明了新方法的有效性和正确性.     

组合式三相双Buck宽变频逆变器

介绍了两态滞环电流控制型双Buck逆变器的电路结构和工作原理,对系统内环进行建模和分析。从理论上分析得到电流内环可以把LC二阶系统降阶为一阶系统,并将电流内环近似等效为一阶惯性环节,其时间常数主要取决于系统滤波电感的大小,并提出了一种滞环电流控制型逆变器输出滤波器的解耦设计方法,对宽变频输出时的输出滤波器进行优化设计。在此基础上进行三相组合式实验研究,通过数字控制技术实现逆变器系统具有360~800 H z宽变频输出。最后通过三相6 kVA原理样机,验证了本逆变器系统在全频率范围得到良好的输出电压波形和较高的效率,具有更广的应用前景。     

Autonomous navigation of formation flying spacecrafts in deep space exploration and communication by hybrid navigation utilizing neural network filter

Autonomous navigation of spacecrafts is a difficult task, however, which is a must in future deep space exploration. With multiple spacecrafts flying in space, this aim can be achieved by formation flying spacecraft (FFS) utilizing inverse time difference of arrival (ITDOA) and inverse difference Doppler (IDD) methods, which can locate the position of earth-station from one-way uplink signals in the FFS coordinate, and by way of conversion of coordinates, the position of FFS is achieved in earth-centered earth-fixed (ECEF) coordinate. The ability of neural network (NN) filter in navigation to extract position of spacecrafts from random measuring noise of signal arrival time and Doppler shift is studied with different radius of FFS and surveying parameters. The NN filter used by spacecraft group is new way of unidirectional autonomous navigation and is of high precision of hybrid navigation.     

模压压力对焦炭颗粒增强沥青基炭复合材料性能的影响(英文)

采用普通液压机和新型高效的模压半炭化成型工艺,在大气环境下制备出了高密度、低成本的焦炭颗粒增强沥青基炭复合材料.研究了模压压力对焦炭颗粒增强沥青基炭复合材料的体积密度和抗压强度的影响趋势,并探讨了复合材料的体积密度与抗压强度之间的相互关系.结果表明,增大模压压力,沥青基炭复合材料的体积密度和抗压强度随之明显增加;继续增大模压压力,体积密度仍然呈上升趋势,但抗压强度却突然下降;沥青基炭复合材料的体积密度越高,其抗压强度未必也就越大.     

基于FPGA的增强Lee滤波算法设计与实现

增强Lee滤波算法能够较好地滤除影响SAR景象匹配性能的相干斑噪声,是一种非常有效的SAR图像预处理方法.为了提高图像处理算法在硬件上实现的实时性,本文根据FPGA编程特点,对增强Lee滤波计算过程进行优化,并利用硬件描述语言完成了增强Lee滤波在FPGA中的实现.实际工程应用表明,此种方法能够快速实现SAR图像相干斑...     

动态时频谱分析、探测和跟踪的随机有限集法

动态出现和消失多分量信号的时频分析问题一直是非平稳信号处理的难点之一。为此,提出了一种分析、探测和跟踪多分量信号的随机有限集法。该算法利用时频变换,如短时傅里叶变换或自适应谱估计法,以及多项式预测模型,将多分量信号的时频分析问题归纳成可利用随机有限集进行多目标追踪的问题。分析表明：借助于提出的初始权重赋值算法,以及谱分量幅度和频率的联合似然函数,就可利用高斯混合概率假设密度滤波器来实现对动态时频谱的分析、探测和跟踪。在仿真实验中,所提算法有效提升了动态时频谱的跟踪精度,其对微弱时频谱分量的探测能力,以及对载频差异的分析能力均优于文献报道的算法。     

基于PTE的多雷达航迹融合算法

针对杂波背景下的多雷达航迹融合时局部估计误差互协方差矩阵未知的问题,提出基于目标存在概率（PTE）的航迹融合算法,提升了正确航迹率和跟踪精度。首先,通过综合概率数据关联得到单接收站的目标航迹估计集合和对应的目标存在概率。然后,在局部估计误差互协方差矩阵未知的条件下,基于PTE信息提出不带记忆的综合广义凸组合航迹融合算法。进而将前一帧的融合状态进行反馈,提出带记忆的综合广义凸组合航迹融合算法。仿真验证了所提算法的有效性。     

Fault diagnosis based on measurement reconstruction of HPT exit pressure for turbofan engine

Aero-engine gas path health monitoring plays a critical role in Engine Health Management(EHM). To achieve unbiased estimation, traditional filtering methods have strict requirements on measurement parameters which sometimes cannot be measured in engineering. The most typical one is the High-Pressure Turbine(HPT) exit pressure, which is vital to distinguishing failure modes between different turbines. For the case of an abrupt failure occurring in a single turbine component, a model-based sensor measurement reconstruction method is proposed in this paper. First,to estimate the missing measurements, the forward algorithm and the backward algorithm are developed based on corresponding component models according to the failure hypotheses. Then,a new fault diagnosis logic is designed and the traditional nonlinear filter is improved by adding the measurement estimation module and the health parameter correction module, which uses the reconstructed measurement to complete the health parameters estimation. Simulation results show that the proposed method can well restore the desired measurement and the estimated measurement can be used in the turbofan engine gas path diagnosis. Compared with the diagnosis under the condition of missing sensors, this method can distinguish between different failure modes, quantify the variations of health parameters, and achieve good performance at multiple operating points in the flight envelope.     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

PIV技术在复杂二相流场中的应用

光学元器件随飞行器在大气中飞行时,其工作性能越来越多地受到大气悬浮汇聚微粒的影响。大气微粒在复杂流场中呈现何种运动汇聚效应,对于合理准确评估机载光学元器件的工作效能具有十分重要的工程意义,而复杂气动流场中微粒分布状态的预估一直是飞行器外界环境研究中的一个难点。气动问题的复杂性、大气中微粒的多样性一直是制约各种试验手段展开、数值模型建立的主要因素。利用先进的激光粒子图像技术,在风洞中对舵面旋涡主导的复杂流场中的微粒速度及分布特性进行了实验研究。在测量舵面翼梢脱落旋涡特性的基础上,通过激光片光扫描流场全域,同时高帧频CCD相机同步曝光,利用PIV 拍摄到的流场中涡流截面内微粒分布的瞬态图像。结合图像后处理技术,对原始粒子图像进行互相关、二值化处理,通过对图像区域内的灰度值计算,统计相对流场截面内的粒子浓度系数,得到在复杂旋涡结构流场内瞬态粒子的分布特性规律。研究结果表明,利用大气中微粒在激光片光下的米氏散射原理,可以有效地拍摄到复杂流场结构下粒子光学散射及分布的特性图像,解决了传统环境测试设备无法对复杂条件下流场内粒子分布进行实时测量的缺陷;在旋涡为主导的流场中,大气中的微粒由向心力牵引,在涡核周围达到平衡运动状态,微粒环绕涡核形成一条环状带,这一区域中的粒子浓度系数要远大于自由流场中的微粒,涡核中心粒子呈“空洞”状态。