带VSCMGs的航天器姿态稳定及功率补偿控制

基于变速控制力矩陀螺群动力学模型建立其复合控制方程和分系统解耦约束方程,用矩阵投影方法同步设计得到航天器姿态与能量一体控制复合操纵律,利用Lyapunov方法分析了转子轴向惯量误差对姿态控制分系统的影响.根据飞轮转子轴向惯量与功率输出之间的误差关系设计出功率控制补偿器.复合操纵律中的力矩和功率两解形式相同,约束方程使得姿态与能量控制两分系统解耦,便于进行考虑执行机构特性的闭环控制系统性能分析.考虑飞轮转子轴向惯量误差时,姿态控制分系统的输出耗散特性使其能够保持稳定,而功率控制分系统输出误差与转子轴向惯量误差成比例关系,经过补偿后功率输出能满足控制要求.     

GPS转发式欺骗干扰原理与仿真研究

研究GPS转发式欺骗干扰的基本原理和理论模型,分析转发式欺骗干扰系统的实现结构,并通过仿真检测验证了干扰效果.仿真结果表明,对于无抗欺骗干扰措施的GPS C/A码接收机,转发式干扰机只需要很小的转发增益,即可达到干扰效果.     

电流控制型多路输出开关电源设计与实现

阐述了一种基于电流型脉宽调制控制器的多路输出反激变换器的设计。采用输出电压加权反馈和变压器绕组设计技术,实现了较高的多路输出电压的交叉调整率。实验结果表明,15V输出的调整率为1.6%,交叉调整率为4.86%。该电路实现简单,效率高,可靠性高,在实际应用中具有重要价值。     

综合化航电智能电源控制软件设计与实现

综合化航空电子系统已经成为高度复杂的实时系统,新一代航电系统的发展对电源模块的设计提出了新的要求：大电流供电、余度供电、故障隔离等。传统的电源模块已经不能适应这些需求,因此,需要设计具有电源控制及管理功能的智能电源及其控制软件。通过对一种智能控制电源软件设计及其控制策略的分析,详细描述了智能电源在新航电系统中的功能及应用,为智能电源在不同场合下的应用提供了探索。     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

TOPSAR data focusing based on azimuth scaling preprocessing

Both Doppler spectral aliasing and azimuth output time folding simultaneously exist in TOPSAR (Terrain Observation by Progressive Scans) raw data. Resampling in both Doppler frequency and azimuth time domain can resolve the azimuth aliasing problem but with the seriously increased computational complexity and memory consumption. According to the special characteristics of TOPSAR raw data support in the slow time/frequency domain (TFD), the presented azimuth scaling preprocessing step is introduced to not only resolve the Doppler spectral aliasing problem but also reduce the increased azimuth samples. Furthermore, the correction of sawtoothed azimuth antenna pattern (AAP) becomes easy to be implemented. The following conventional stripmap processor can be adopted to focus the residual TOPSAR raw data but with the result of azimuth aliased TOPSAR image. The mosaic approach, which has been presented to unfold azimuth aliased ScanSAR image, is exploited to resolve the problem of azimuth output folding in TOPSAR mode. Simulation results and pulse response parameters are given to validate the presented imaging approach.     

基于Visual Basic6.0的功率传感器自动校准系统

从硬件组成和软件设计两方面介绍了功率传感器自动校准系统.着重介绍了该系统的软件设计思路,并就其特点进行说明.该自动校准系统在Visual Basic 6.0环境下完成编程,完整地实现了登录、设备信患登记、测试、报告文件输出及查询功能,使用简便、性能可靠且人机交互良好.     

飞机电源系统参数测试软件的通用性设计

从自动测试系统通用性的角度出发,阐述了ATS软件通用性的实现及关键技术.利用MFC在组件技术的基础上完成了飞机电源系统通用参数测试软件功能组件开发,同时结合GL Studio完成了图形控件的设计和开发.借助于LabWindows/CVI,给出了通用测试软件集成的详细说明和方法步骤.     

菜园坝长江大桥主拱节段风洞试验及分析

中承式拱桥属于柔性空间结构,主拱上承受的脉动风荷载相互干扰。以重庆菜园坝长江大桥为研究对象,进行了湍流下的主拱单拱及双拱节段模型风洞试验。对模型表面脉动压力的功率谱、相关系数、水平和竖向相干函数进行了细致分析,讨论了双拱间距宽度比对脉动压力频域特性的影响。当间距宽度比大于5时,后拱风荷载受到前拱的干扰作用。当两拱间距宽度比小于5时,前后拱风荷载特性类似于组合截面。随间距宽度比变小,主拱涡脱落折算频率和压力功率谱逐渐增大,前后拱迎风面和背风面的相关系数及相干系数均逐步降低。     

噪声干扰Link-16数据链的干扰功率分配方法

在建立对Link-16数据链的干扰模型和接收机模型的基础上,分析了噪声干扰下接收机的误码性能,研究了干扰功率分配问题,并得到了对Link-16数据链的干扰功率分配方程,最后进行了仿真分析。