非常规机动操纵要求的计算

首先推导了飞机运动的逆动力学模型，为使问题具有一般性，采用了刚体运动模型，其中力方程建立在风轴系中，力矩方程建立在体轴系中，并且已知气动力模型，其次，由于飞行轨变地标位置（ｘ，ｙ，ｚ）的形式给出，因此构造了一种基于坐标位置的算法，当给定坐标值后，即可据此对逆问题进行求解并得出相应的操纵要求，最后以一种非常规机动动作为例进行了逆仿真，得出了操纵要求。     

基于空间两点的视觉自主着陆导引算法设计

为提高无人机着陆效率,从着陆速度向量场和导引律设计两方面研究改进。首先,基于椭圆设计速度向量场,实现飞行路程更短、机动性能要求更低的着陆轨迹。然后,基于像素坐标系与机体坐标系的关系,设计无人机的航迹方位角指令;以椭圆切线方向为参考,结合合作矢量特征,设计航迹倾斜角指令;利用图像信息,设计速度大小指令。最后,理论比较了传统轨迹与提出轨迹对方向机动性性能的要求,给出了轨迹参数与无人机方向机动性性能的关系。利用Simulink搭建系统仿真平台,计算满足要求的合作矢量特征。结果表明,无人机以曲线轨迹准确软着陆到目标,满足实际运用的需要。      

虚拟多触角探测的高超声速滑翔飞行器再入机动制导

针对高超声速滑翔飞行器再入过程中面对的多约束问题，提出一种基于虚拟多触角探测的路航点规划机动制导策略。该机动制导策略通过飞行器最大转弯轨迹计算速度-剩余地面距离-航向角约束，在分段定点模式中发出多条粗略预测触角，引用触角末端反馈的信息计算优先级以确定临时路航点；同时在机动制导模式中发出精细探测触角，计算触角末端信息优先级，经倾侧角延时滤波器得出控制指令，对飞行器进行机动制导。基于多触角探测的路航点规划机动制导策略，降低了三触角机动制导方法中的计算时间；同时，4种典型禁飞区条件下的仿真结果表明，该策略能够有效稳定地解决机动制导过程中的多约束问题。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.     

目标机动条件下的定点伴飞控制方法研究

对目标机动条件下的定点伴飞控制进行了研究。根据相对运动关系,建立适于伴飞模式的相对运动方程,将目标机动大小作为未知量加入相对运动方程,构建不确定系统。用LQR和Lyapunov法结合的方式设计相应定点伴飞控制律。理论证明了在目标机动时该控制律仍能实现系统的渐近稳定。仿真结果验证了该控制律的有效性。     

使用混合执行机构的快速机动卫星力矩分配算法

针对单框架控制力矩陀螺群（SGCMGs）存在奇异和单框架控制力矩陀螺（SGCMG）存在框架转速死区的问题,研究了SGCMG与飞轮联合作为执行机构的控制力矩分配算法,以SGCMG功耗、飞轮功耗和飞轮角动量的二次型加权矩阵求和为性能指标,提出了一种形式简洁的混合执行机构力矩分配算法,通过分析,证明该分配算法能够有效的避免SGCMGs的奇异;设计了一种SGCMG功耗加权矩阵的调节策略,解决了SGCMG陷入转速死区的问题,设计了一种飞轮角动量加权矩阵的调节策略,通过对加权矩阵的实时调节实现了对飞轮角动量的管理,解决了飞轮转速的饱和与过零问题。数学仿真结果验证了该力矩分配算法的有效性。     

分布式InSAR卫星绕飞角设计与控制方法研究

针对分布式卫星绕飞轨道构型设计与控制问题,提出了基于Hill方程的绕飞构型设计算法,给出了绕飞角与升交点赤经偏差和轨道倾角偏差的关系,并分析了绕飞角的稳定性;根据分布式InSAR卫星绕飞构型特点提出了基于开普勒轨道实现特定绕飞角和绕飞半长轴的双层迭代轨道控制算法。仿真结果表明,上述方法设计的绕飞构型稳定,捕获控制策略简单可行、控制精度高,具有一定的工程参考价值。     

姿态机动中SGCMG的一种改进奇异鲁棒操纵律设计

单框架控制力矩陀螺(SGCMG)在卫星姿态控制中以其具有大力矩输出能力而受到重视并已成功应用于在轨卫星,其应用难点是构形奇异问题,特别是在快速连续机动的过程中,CMG框架角必须迅速脱离奇异状态.使用描述CMG输出力矩和期望控制力矩夹角的奇异度量方法,以便在仿真中观察判别CMG构形的奇异程度.着重改进CMG的奇异鲁棒操纵律,应用高斯函数的方法确定鲁棒系数.仿真实例表明,与传统的梯度型零运动相比,该方法可以在卫星的连续快速机动中使CMG系统更为迅速地摆脱奇异,更为快速地完成机动并减小姿态抖动.