国内外深空探测器精密定轨软件研究综述及WUDOGS简介

深空探测器精密定轨软件系统的研制在深空探测活动中是一个非常重要的环节,一直受到各大航天机构的重视。针对国内外深空探测器精密定轨软件平台的研究现状,重点介绍了具有代表性的美国JPL(Jet Propulsion Laboratory,喷气推进实验室)的DPTRAJ/ODP(Double Precision TRAJectory program/Orbit Determination Program,双精度轨道程序/定轨程序)和MONTE(Mission analysis,Operations,and Navigation Toolkit Environment,任务分析、操作和导航工具箱环境),GSFC(Goddard Space Flight Center,戈达德航天飞行中心)的GEODYN-II以及法国CNES(Centre National dEtudes Spatiales,国家空间研究中心)的GINS(Géodésie par Intégrations Numériques Simultanées,同步数值积分大地测量)软件系统,对这些软件的结构与功能进行了总结。之后对武汉大学自主研制的深空探测器精密定轨软件系统WUDOGS(Wuhan University Deep space Orbit determination and Gravity recovery System,武汉大学深空探测器精密定轨与重力场解算软件系统)的主要模块与功能进行了介绍,通过与GEODYN-II的交叉对比验证,表明:对于探测器的轨道预报,WUDOGS与GEODYN-II的1个月位置差异小于0.3mm,2d位置差值小于5×10~(-3) mm;双程测距、双程测速的理论计算值和GEODYN-II的差值RMS(Root Mean Square,均方根)分别在0.06mm,0.002mm/s的水平;WUDOGS目前已初步具备了月球和火星探测器精密定轨能力。最后对WUDOGS的下一步发展方向进行了展望。     

Phobos regolith simulants PGI-1 and PCA-1

The Martian moon Phobos is the target of the upcoming JAXA Martian Moons eXploration (MMX) mission. There are currently no known samples of Phobos, so spacecraft hardware testing and scientific studies require Phobos regolith simulants. Here, we present two new Phobos regolith simulants: Phobos Captured Asteroid-1 (PCA-1) and Phobos Giant Impact (PGI-1). These two simulants reflect the two hypotheses for Phobos’s formation, and thus the two broad possibilities for composition. This work follows previous efforts to document the development of mineralogically accurate simulants, in an effort to overcome past pitfalls with inappropriate uses of simulants. We report physical and geotechnical properties of PCA-1 and PGI-1, including their reflectance spectra, grain size distributions, abrasivity, cohesion, strength, and hardness. Our intent is for PCA-1 and PGI-1 to be open standards for Phobos simulants, and we present the simulant recipes and production methodology for use and modification by the community.     

面向全月球探测的天基中继测控系统设计

中继测控是月球探测任务中必须解决的关键问题，特别是月球背面和两极地区的着陆和巡视探测任务以及载人登月任务。本文首先对国内外月球中继测控卫星的研究和发展情况进行了调研，分析了未来全月球探测对中继测控的需求。在此基础上，重点给出了面向全月球探测任务的天基中继测控系统设计方案，并仿真分析了该方案的中继测控性能。最后给出了简要的卫星设计方案。     

Longitudinal MLT wind structure at higher mid-latitudes as seen by meteor radars at central and Eastern Europe (13°E/49°E)

The mid-latitude mesosphere and lower thermosphere (MLT) wind speeds measured by two SKiYMET meteor radars (MRs) at Collm (51°N, 13°E) and Kazan (56°N, 49°E) during 2016–2017 were analyzed to study longitudinal wind structures. The differences between monthly mean prevailing wind speeds and tidal amplitudes were compared with the corresponding differences obtained from TIMED/TIDI satellite winds and gradient wind speeds from the AURA/MLS instrument. It is shown that the MR wind difference between the two sites is statistically significant. The difference of the horizontal prevailing winds can be explained by a superposition of the background zonal flow, which is different at the two latitudes, with stationary planetary waves of different origin. Non-migrating tides contribute significantly to the difference of the semidiurnal tidal winds between the two sites.     

探空火箭定时定点入轨的一种制导控制规律

针对特定探测天体,给出了特殊用途的探空火箭与其实现空间交会的时刻与地点的计算方法.根据特定天体的运行轨道,发射前算出标称交会飞行轨道,装订在箭载计算机内.火箭发射后,利用箭载惯性导航系统确定自身当前的位置与速度,比对标称飞行轨道参数得出飞行偏差,通过控制火箭推力偏斜调整飞行轨道,使探空火箭在交会时刻到达交会点,并在交会时刻相对与惯性空间的速度为0.定义了研究所用的各种坐标系,建立了火箭飞行动力学方程.研究了标称飞行轨道最优交会点选取,交会时间与发射时间计算等问题.给出了发射后动力飞行段的制导控制规律,核心思想是将控制信号分解为时间控制、当地水平面上的海拔高度控制、南北控制与东西控制,通过设置偏置量减小关机后轨道摄动因素引起的漂移.利用计算机数值仿真验证了这种制导控制规律的可行性.     

磁等离子体推力器工作机理与应用前景研究

研究了发动机能量输入、工质电离、等离子体加速及能量转换过程及机理,同时分析了磁等离子体推力器在空间推进任务中的应用前景.研究表明磁等离子体推力器主要利用电磁力加速和磁喷管的能量转换作用来实现加速,这种方式在大功率条件下,能够获得大推力、高功率和较长工作时间,在大功率轨道航天器和深空任务中有广阔的应用前景.     

Concept options for the aerial survey of Titan

Various aerial platforms intended for long endurance survey of the Titan surface are presented. A few novel concepts are introduced, including a heated methane balloon and a balloon with a tethered wind turbine. All the concept options are predicted to have lower scientific payload fractions than the Huygens probe. It is concluded that the selection of the best aerial platform option depends on more accurate mass estimates and a clear decision on whether, or not, in situ surface composition measurements are required in conjunction with aerial remote sensing.     

A novel wireless light sensing device for planetary and astronomical observations

A novel and versatile wireless light sensing device has been designed and tested for stellar and planetary photometric observations. The device weighing few 10 s of grams finds a number of potential applications in the fields of astronomy and in situ planetary exploration. A Wireless Sensor Network (WSN) using a number of these devices has been deployed to successfully carry out simultaneous photometric observations under different conditions viz. sunlight, twilight, moonlight etc. Observation of a star of known magnitude for flux calibration at low intensity has been carried out by coupling the device to a 1.2 m telescope which demonstrates its sensitivity. A WSN using these devices is further capable of spatio-temporal investigations of sky background intensities. Such a network can also be used to effectively monitor certain astronomical events (lunar eclipse, asteroid occultation etc.) simultaneously from several locations. The capability of the device, level of miniaturization and its versatility makes it a potential tool for many photometric applications.     

深空探测航天器巡航段自主导航方法研究

对深空探测航天器自主导航方法进行了研究。为了应对深空探测中航天器轨道动力学模型的误差，在分光计测量航天器相对于太阳径向速度基础上，引入了小行星的视线矢量测量。通过最小二乘法计算出由小行星视线矢量所得到的位置信息，采用改进的信息融合方法修正扩展卡尔曼滤波中不精确的动力学模型造成的状态估计误差。同时计算了模型的能观度，对模型的可观性进行了分析。最后对算法进行了仿真分析，仿真结果表明，该算法对动力学模型的依赖性明显低于其他算法，在相同模型精度下，可获得更好的滤波精度。     

空间探测磁强计安装部件的力学特性分析

对某深空探测器中的有效载荷-高精度磁强计的安装部件进行了有限元分析,分别获取了磁强计安装部件在升空过程中承受40g加速度冲击载荷以及-180～75℃的极限温度情况下,在x,y,z方向上的最大应力和最大位移,给出了由于磁强计安装部件的变形而导致的三个探头在x,y,z方向上的偏转角度,采用扫频实验法分析了磁强计安装部件的频谱特性,为空间探测磁强计的设计提供了依据.