Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

离箱扰动和折叠翼展开数学模型研究

根据箱式发射导轨与导弹，导弹与折叠翼的约束特点，应用动力学普遍定理和解除约束原理，创建了离箱扰动运动数学模型和拆卸叠翼展开过程计算数学模型，并将计算结果与飞行试验结果作了比较。     

基于有限元法的隧道荷载模型位移反分析

介绍了一种以荷载模型为求解对象的位移反分析法。它是以通用有限元软件为实验平台，利用隧道位移实测值建立荷载灵敏系数方程，根据最小二乘法原理反求隧道模型的荷载，再将正分析结果和实际值进行对比分析井重新调整隧道荷载模型，最终获得较为符合实际的隧道荷载模型。该方法的优点是既考虑了岩土松动荷载效应又能体现支护结构与周围岩土体的共同作用，且具有较好的操作性。     

掠海飞行导弹击水概率的仿真研究

本文对掠海导弹的击水概率问题进行了研究,提出了用均匀设计、Monte—Carlo法和逐步回归法建立击水概率预报公式的仿真方法,并结合某型号的反舰导弹进行计算,得到了满意的结果。本文还利用表观频率和表观频谱的概念,建立起飞航导弹的背景干扰——海浪和阵风的数学模型,并用波叠加法进行了数字仿真。     

浅谈消费心理与购买模式的逻辑关系--兼论技术类人员营销素质的培养

本文针对目前市场上对营销人员的需求旺盛情况，主要谈了从非专业人员中培养营销人员的方法。强调了学习创新的重要性。用通俗的引例，解释了复杂的心理学有关术语及认识过程与消费者购买行为的关系。培养营销人员准确把握消费者心理活动的能力，提高营销人员自身的生存能力和企业的竞争能力。     

H-6部件与外挂天平的研制

介绍了H 6部件与外扌圭物测力试验的难点 :一是天平的设计载荷极不匹配 ,如机翼天平的滚转力矩是常规天平的 1 0多倍 ;二是模型尾部是船形尾段。采用常规的支撑方式 ,支杆强度太弱 ,试验不安全 ,同时也不利于多台天平的敷线 ,总体方案采用模型尾部与支杆合为一体的结构形式 ,既保证了试验安全又便于多台天平的敷线。天平设计首先保证试验安全 ,用双电桥提高天平的输出。试验结果表明 :总体试验方案正确 ,天平设计合理 ,支撑刚度好 ,测量精度高。     

用Monte-Carlo法作Bézier曲线

本文主要内容是用Monte-Carlo法作Bézier曲线,以及Monte-Carlo法和Bézier曲线的联系。     

二维通道内湍流边界层分离的实验研究

用激光多普勒技术测量了二维扩压器中不可压湍流边界层分离流动，得到了时均速度和雷诺剪应力分布。实验结果分析表明：以Ｃｏｌｅｓ速度律发展的Ｂａｒｄｉｎａ速度分布可以描述瞬时间歇分离点以前和瞬时间歇再附点以后的时均速度分布，但无法描述分离区的边界层速度型。Ｃｒｏｓｓ速度分布可描述分离区的边界层速度分布。Ｃｅｂｅｃｉ＆Ｓｍｉｔｈ涡粘性代数模型难以正确地描述分离边界层的雷诺剪应力。