民机节油策略研究

节油是航空公司的长效措施,各航空公司均很重视。从飞行具体环节出发,基于性能研究民机节油策略,给出飞行前重量、重心、APU 使用和滑行等措施分析和建议,并给出起飞、爬升、巡航、下降和进近着陆的经济飞行节油策略分析和建议。通过对飞行具体环节节油策略的研究,提出重视飞行计划优化和执行的思路,案例分析优化效果,对比分析现有飞行计划方法,得出飞机制造商提供包含飞行计划和QAR(Quick Access Recorder)分析系统等的整体IT解决方案,是提升节油效果的一个性价比很高的选择的结论。     

基于Fibonacci搜索方法的航空发动机性能寻优

介绍了Fibonacci搜索方法应用于发动机性能优化中的原理,建立带两个出口面积、气流马赫数可变的引射器的涡喷发动机的总体性能计算模型,应用Fibonacci搜索方法在优化参数区间内对该发动机进行了最大推力、最低油耗、最低涡轮前温度模式的寻优.举例说明了Fibonacci搜索方法应用的具体过程.给出了不同高度、马赫数下的寻优结果.结果表明:最优目标性能满足的约束边界与飞行高度、马赫数密切相关.不同的飞行高度、马赫数对应了不同的最优控制策略.但不论飞行任务如何,根据该方法进行的优化控制所获得的目标性能是最佳的.该优化方法不仅适用于该类涡喷发动机,也为其他类型航空发动机的优化控制打下一定的基础.      

基于离散粒子群算法的航空发动机总装工艺优化方法

为了提高航空发动机总装工作的效率与质量,加强对总装工序和总装机件的管控,量化不同总装人员工作任务量,提高发动机总装的一致性和可追溯性,提出了1种发动机总装分区优化方法。以改进的2进制粒子群算法为基础,平衡了发动机总装各区域的工作内容,最小化各总装区域的工作差异,增强了每个区域装配机件的关联度,提高了总装工作的并行度,从而提高了装配质量。以某型发动机总装区域划分工作为实例,通过上述算法进行了总装区域划分,量化了所有装配区域每一工序的具体装配内容,减小了不同装配区域间的机件差异,杜绝了缺件、剩件等装配问题。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

多变量全局寻优与智能优化在星座组网中的应用

顶层任务规划通常与星座组网紧密结合,小卫星分散灵活的特性尤其适用于星群规模化在轨运行。针对热点区域覆盖和全球覆盖的不同任务需求,提出了对构型多变量进行全局寻优和利用智能优化技术进行星座构型优化的方法,两种优化方法可分别获得小规模星群最优效能与超大型星群的较优效能。优化方法不受轨道类型和任务目标分布的约束,具有良好的鲁棒性。     

100 kWe级空间快堆核电源系统仿真平台开发与应用

空间核反应堆电源作为一种具有竞争力的空间电源方案,正逐渐受到关注及应用。本文针对一个100 kWe级锂冷快堆耦合布雷顿循环的空间堆核动力系统方案,修改了RELAP5程序中的物性程序、换热模型,程序中的中子动力学模块使用蒙特卡洛方法计算快堆物理参数与堆芯控制调节参数,由此集成并建立一个空间快堆核动力系统综合仿真平台,应用该平台对100 kWe级空间堆核动力系统进行了稳态模拟与事故分析。结果表明:在瞬态发生后系统各参数变化符合预期,验证了各部件及控制系统的功能性及有效性;同时,还初步进行了仿真平台用于100 kWe级空间反应堆核动力系统设备的设计优化的实践,为空间快堆设计与安全分析提供了技术储备。     

基于姿态偏置的卫星天线方向图在轨测试实现

针对静止轨道通信卫星在轨测试期间天线方向图测试的需求,分析了天线方向图测试的方法。针对利用姿态机动进行天线方向图测试问题,给出了地面操作及操作计划制订方法,并通过工程实际验证了该方法的有效性。     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.