Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

聚氨酯改性环氧树脂形状记忆材料

以甲基四氢邻苯二甲酸酐(METHPA)为固化剂,利用自制的聚氨酯预聚体(PU)改性环氧树脂(TDE-85)制备形状记忆聚合物。研究了形状记忆环氧树脂的力学性能、Tg和形状记忆性能。研究表明,形状记忆环氧树脂的韧性得到明显的提高,Tg得到了相应的下降,形状记忆性能良好,形状回复率皆在96%以上,形状固定率约达100%。     

α、β相分布形态对TC11钛合金高温循环蠕变速率的影响

对TC1 1钛合金施行了不同的热处理制度 ,得到 3种组织形态 ,研究了不同的组织形态的高温循环蠕变。结果表明 ,晶间 β组织具有低的循环蠕变速率 ,而随最大应力的增加 ,蠕变速率增加快 ;而等轴组织和片状组织循环蠕变速率较高 ,但随应力的增加 ,蠕变速率增加较慢。分析认为 ,晶界滑移行为对高温循环蠕变有重要影响     

高超声速边界层的转捩及预测

首先描述了边界层转捩的基本过程及研究内容。在此基础上,指出了高超声速边界层不同于不可压缩边界层的流动不稳定性特性,并介绍了边界层的转捩机理与感受性特征;给出了高超声速三维边界层中预测转捩的常用方法,并着重介绍了多用于工程实际的e N方法以及对e N方法的理性改进,同时列举了在高超声速三维边界层中应用e N方法实现转捩预测的多个实例。最后,分析并总结了高超声速边界层转捩预测所存在的困难及需要解决的问题。     

高超声速边界层转捩机理及应用的若干进展回顾

高超声速边界层转捩对飞行器的热传递、表面摩阻和流动分离等有重要影响,尤其是再入飞行器和吸气式巡航飞行器。然而,人们对边界层转捩机理中的很多问题认识还不清楚,或存在争议。本文从扰动波演化的角度回顾了高超声速边界层感受性、线性稳定性和非线性作用的国内若干研究进展,并以基于谐波共振的人工转捩技术为例示范了这些机理认识在转捩控制上的应用。扰动的产生和发展是认识边界层转捩机理的核心。通过研究扰动波来认识边界层转捩机理,开展应用创新研究对提升飞行器性能具有重要意义。     

民机高速风洞试验的阻力雷诺数效应修正

在飞机设计阶段,获得准确的气动特性数据对设计者是十分重要的,采用缩比模型的风洞试验是主要途径之一。但是风洞条件限制了试验的Re数,从而影响了对跨音速巡航阻力的评估,因此需要对风洞试验结果的阻力进行Re数效应修正。分析了风洞试验结果阻力的误差构成,提出了Re数效应修正的风洞试验数据基础;进一步就跨音速巡航阻力的构成进行分析,论述了对最小阻力和升致阻力分项修正的方法,并对修正结果进行了验证,得到了一种可靠的工程方法。     

飞错高度原因及其防范措施

针对飞错高度这一导致空中危险接近、空中相撞、可控飞行撞地等一系列事故或事故征候的主要根源，通过对具体实例和数据进行分析，找出飞错高度的原因，归纳飞错高度类型，并提出一系列避免措施，以期减少或消除因高度错误而造成的飞行事故征候或飞行事故率。从根本上提高飞行安全性。     

再入飞行器和模型转换雷诺数计算

本文采用近似的激波关系、球锥体压力分布、平衡气体状态方程、边界层厚度计算公式及转捩准则等,按照流管法计算了4种再入飞行器的外流转捩雷诺数和转捩距离,并给出了高硅氧、碳石英、碳碳球锥模型的转捩雷诺数范围,对再入飞行器和模型的计算结果作了分析和比较。     

用低纯原料制备电冰箱起动器PTCR的重要途经——热敏钛酸钡陶瓷第二相结晶

根据Al_2O_3-SiO_2系统相图,调整Al_2O_3,SiO_2添加剂比例,可在热敏钛酸钡陶瓷显微结构中形成莫来石结晶相,莫来石的形成改善了用国产低纯原料制备电冰箱起动器PTCR的性能。本文就莫来石第二相与PTCR性能关系进行了讨论。     

Effect of wall suction on leading edge contamination

This paper is devoted to an experimental study of swept wing leading edge contamination by the turbulence emanating from the wing-wall junction. The main objective is to delay the contamination onset by applying surface suction along the attachment line. Two series of experiments are described; the first one was performed in a small wind tunnel at CERT ONERA, the second one was carried out in the F2 wind tunnel at Le Fauga Mauzac centre. Hot film measurements showed that leading edge contamination could be delayed up to very large Reynolds numbers. We also studied the behaviour of the relaminarized boundary layer downstream of the sucked region, along the span as well as in the chordwise direction.