应用约束条件快速解算整周模糊度

ＧＰＳ载波相位测量用于解算载体的航向和姿态时必需解决的问题之一就是整周模糊度的确定。近年来提出了多种模糊度的解算法方法,但对ＧＰＳ航姿系统来说,若能利用固有的约束条件则会使模糊度问题变得简单且快速有效。在详细分析了几种约束条件的基础上,文中探讨了如何合理 这些约束条件来减小模糊度的搜索范围,以加快模糊度的解算速度,并对检验方法作了改进。通过仿真结果对文中方法进行了检验。     

改善荧光灯照明问题初探

本文对我院大学生视力减弱情况作了调查统计,并提出了保护学生视力的具体建议。文中还就照明与视力的关系,荧光灯接入移相电路、三相电路的方法及优点作了阐述。     

基于覆盖圆的太阳同步回归轨道卫星目标轨迹调整方法

遥感卫星星座在环境监测、地理测绘等领域运用中,需要考虑目标轨迹分布的优化问题.轨迹分布与星座的重访能力和进出站间隔保持等应用需求密切相关.目前对星下点轨迹分布的优化和调整还缺乏准确实用的方法,存在卫星数目增多带来的计算量增加问题和对多种需求综合考虑不够的问题.为了克服现有技术的不足,解决太阳同步回归轨道遥感卫星星座的目...     

深化失效学的哲学理念探索,强化材料失效交叉技术研究

力图从哲学的高度,对失效学的认识论、矛盾论、系统论和方法论进行简要的阐释,从中提出一些要点,并对失效学哲学理念在失效事故分析诊断预防技术中的应用提出建议,为深化失效学的哲学理念探讨奠定初步基础。从失效学的理论基础、应用基础和工程技术等3个方面总结提出了失效学的理论和技术体系,为失效学的体系建设提供了技术框架;还从材料服役前、使用中和失效后等3个阶段归纳了材料失效交叉技术领域中的科学问题或关键技术,为加强其交叉技术的研究提炼出了若干重点方向。     

液体火箭发动机初始雾化液滴分布预测

在简要描述使用最大熵原理预测初始雾化液滴分布的基础上,发展了较传统方法具有更大收敛域的数值计算方法,建立了离心式喷嘴雾化特性研究实验台,使用激光相位粒子分析仪进行了雾化粒径分布研究,结果显示实验数据同使用最大熵原理预测的分布吻合性较好,在此基础上最后提出了在液体火箭发动机雾化粒径分布预测应用中的策略。     

Mechanical behavior and properties of fiber reinforced ceramic matrix composites for high temperature use

Ceramics can keep their mechanical characteristics up to 2 000℃ or higher.In this paper,A model to predict ultimate strength of continuous fiber-reinforced brittle matrix composites is developed.A statistical theory for the strength of a uni-axially fiber-reinforced brittle matrix composite is presented.Also a semi-empirical frictional heating method for estimating in-situ interfacial shear in fiber-reinforced ceramic matrix composites was improved.Local uneven fiber packing variation as well as uneven micro-damage during fatigue can be expected to have effects on the composites:generation of frictional heating,thermal gradients,and residual stresses around local fiber breaks.This study examined those engineering interests by the finite element method.      

航空发动机过渡态全局寻优控制方法研究

为了对发动机的动态过程进行控制, 提出了一种基于SQP的全局寻优控制方法.每一步寻优过程分为长程优化和短程优化两个阶段.根据长程优化结果, 重构了关联目标函数, 在此基础上, 进行了短程优化修正, 并利用修正结果进行控制.将这种方法应用于某型航空发动机的过渡态控制中, 得到了理想的控制结果.仿真结果表明该方法能较好地解决一般局部优化方法在有纯延迟、模型失配等情况下的优化控制效果下降的问题.      

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

航空发动机双转子系统的拍振分析

 在双转子航空发动机中,由于转子系统不可避免地存在不平衡量,当两个转子的转速比较接近时,发动机会出现拍振现象,拍振将引起振动强度过大问题。对双转子系统的拍振进行了研究,分析了拍振的周期性、信号强度及其反向转子特性,阐明了拍振产生的机理和特征,并采用数值仿真和试验对拍振进行了定量分析和验证。研究表明,拍振与双转子转速差和不平衡量的相位因素有关,当转速差小于工作转速的20%时,双转子系统拍振信号的强度较大。