Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

长矩形盒零件超塑性胀形工艺加载规律的优化

本文通过对长矩形盒零件的力学解析，得到了优化加载规律的数学表达形式。按此规律进行气压胀形，与恒压胀形实验结果相比，能有效地提高成形极限，并使厚度分布情况有明显的改善。     

薄壁内、外半管冲压成形工艺参数模拟优化设计

针对内、外半管的结构特点,分析计算冲压成形主要工艺参数及毛坯尺寸,运用有限元分析软件ANSYS/LS-DYNA,对内、外半管的成形过程进行了模拟。研究了不同压边力及不同冲压速度对零件拉深成形的影响,分析了零件的成形工艺及其起皱缺陷,优化了毛坯形状,避免了成形过程中的缺陷,获得了理想的毛坯形状和工艺参数。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

Optimization of entry-vehicle shapes during conceptual design

During the conceptual design of a re-entry vehicle, the vehicle shape and geometry can be varied and its impact on performance can be evaluated. In this study, the shape optimization of two classes of vehicles has been studied: a capsule and a winged vehicle. Their aerodynamic characteristics were analyzed using local-inclination methods, automatically selected per vehicle segment. Entry trajectories down to Mach 3 were calculated assuming trimmed conditions. For the winged vehicle, which has both a body flap and elevons, a guidance algorithm to track a reference heat-rate was used. Multi-objective particle swarm optimization was used to optimize the shape using objectives related to mass, volume and range. The optimizations show a large variation in vehicle performance over the explored parameter space. Areas of very strong non-linearity are observed in the direct neighborhood of the two-dimensional Pareto fronts. This indicates the need for robust exploration of the influence of vehicle shapes on system performance during engineering trade-offs, which are performed during conceptual design. A number of important aspects of the influence of vehicle behavior on the Pareto fronts are observed and discussed. There is a nearly complete convergence to narrow-wing solutions for the winged vehicle. Also, it is found that imposing pitch-stability for the winged vehicle at all angles of attack results in vehicle shapes which require upward control surface deflections during the majority of the entry.     

应用模糊变权的启发式搜索进行飞行轨迹优化

回顾了军机轨迹优化问题的提出及研究历史，介绍了几种主要方法的特点，特别是启发式搜索算法应用于飞行轨迹优化问题时存在的主要问题。提出为了得到较好的近优路径而采取的模糊变权处理方法。通过计算不同加权下解的情况，说明模糊变权方法是使加权随具体情况作相应调整的有效手段，为提高飞行路径规划系统的有效性开辟了一个新思路。     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

To improve performances of multi-objective optimization algorithms, such as convergence and diversity, a hybridization- encouraged mechanism is proposed and realized in elitist nondominated sorting genetic algorithm （NSGA-Ⅱ）. This mechanism uses the normalized distance to evaluate the difference among genes in a population. Three possible modes of crossover operators--＂Max Distance＂, ＂Min-Max Distance＂, and ＂Neighboring-Max＂--are suggested and analyzed. The mode of ＂Neighboring-Max＂, which not only takes advantage of hybridization but also improves the distribution of the population near Pareto optimal front, is chosen and used in NSGA-Ⅱ on the basis of hybridization-encouraged mechanism （short for HEM-based NSGA-Ⅱ）. To prove the HEM-based algorithm, several problems are studied by using standard NSGA-Ⅱ and the presented method. Different evaluation criteria are also used to judge these algorithms in terms of distribution of solutions, convergence, diversity, and quality of solutions. The numerical results indicate that the application of hybridization-encouraged mechanism could effectively improve the performances of genetic algorithm. Finally, as an example in engineering practices, the presented method is used to design a longitudinal flight control system, which demonstrates the obtainability of a reasonable and correct Pareto front.     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

电火花加工计算机辅助工艺过程设计系统

介绍电火花计算机辅助工艺过程设计系统（ＣＡＰＰＳ），用于为一个给定目标选择最佳操作。同时，还考虑了其它的会影响ＥＤＭ加工过程的加工方法（如铣削等）。系统的输入信息是在已有的ＣＡＤ信息的基础上产生的基于ＣＡＰＰ特征的工件描述。每个特征类对应于一个特定的一般工艺规程，并由系统对其进行评价，然后基于最低成本的原则，计算出最优工艺规程。同时还介绍了一种计算工时的通用方法。