某型涡扇发动机测量数据融合模型

为提高传感器测量数据的有效性、可信性,基于共同工作方程,采用原始对偶内点法对某型涡扇发动机测量数据进行了融合分析。通过案例研究了当可测量参数存在误差时融合模型对流量、温度及压力等参数的预测效果;使用两种初值更新法,测试了不同工况下的物理运算时间;研究了约束违反程度对数据融合效果的影响;测试了关键传感器失效情况下,动态数据融合模型对缺失参数的预测效果,提出了进一步加快计算速度的方法。结果表明:通过数据融合,测量数据和未测量参数的不确定度下降到1%以内;通过算法优化,运算时间减小到5s,为发动机状态监控、传感器维护和传感器失效情况下发动机控制策略的制定提供了支持。     

Resistance welding of glass fiber reinforced thermoplastic composite: Experimental investigation and process parameter optimization

The utilization of fiber reinforced thermoplastics (FRTP) is expected to fulfill lightweight demand in mass-produced aerospace products. Facing the unavoidable assembly of FRTP parts, fusion bonding methods such as resistance welding are promising compared with mechanical joint and adhesive bonding. In this paper, a procedure has been brought out to understand the relationship between processing conditions and performance of the FRTP welding joints. The adherends were continuous glass fiber reinforced polypropylene (GF/PP) laminates fabricated by hot-pressing method. The influences of time, current and pressure on the bending strength of the resistance welding joints were investigated. A processing window was drawn based on the optical observation of welded surfaces. The quantitative relationship between process parameters and mechanical property of GF/PP welding joint was established by Response Surface Method (RSM) with high accuracy. It was found that bending strength of GF/PP welding joint was improved by 31% compared with hot-pressing benchmark.     

空间机械臂视觉相机内参标定技术研究

针对空间机械臂视觉相机的任务需求与配置,内参标定技术是相机高精度获取合作目标位置、方向等运动信息的首要前提和重要保障。文章设计了一种基于二维平面靶的机械臂相机内参标定方法,用于解算焦距、主点坐标、畸变系数等。首先,利用相机拍摄多幅平面靶图像,求解平面靶与相机图像之间的映射矩阵;其次,构建相机内参约束方程;再次,利用特征值分解,解算焦距、主点坐标等参数值;最后,引入径向、切向畸变构建非线性模型,将解得的内参作为初值,利用Levenberg-Marquardt优化算法即可计算出相机内参最优解。试验结果表明,该方法完全适用于机械臂相机内参标定,标定结果均满足机械臂视觉相机获取合作目标三维位姿的测量精度要求。     

碳纤维与芳纶纤维复合材料机械加工刀具选用

通过对复合材料特性和加工机理的分析,论述了复合材料机械加工对刀具材质、结构和几何参数的要求,介绍了几种适合于碳纤维和芳纶纤维复合材料机械加工的钻削和铣削刀具.     

Springback prediction of thick-walled high-strength titanium tube bending

Significant springback occurs after tube rotary-draw-bending （RDB）, especially for a high-strength Ti-3A1-2.5V tube （HSTT） due to its high ratio of yield strength to Young＇s modulus. The combination scheme of explicit and implicit is preferred to predict the springback. This simulation strategy includes several numerical parameters, such as element type, number of elements through thickness （NEL）, element size, etc. However, the influences of these parameters on spring- back prediction accuracy are not fully understood. Thus, taking the geometrical specification 9.525 mm × 0.508 mm ofa HSTT as the objective, the effects of numerical parameters on prediction accuracy and computation efficiency of springback simulation of HSTT RDB are investigated. The simulated springback results are compared with experimental ones. The main results are： （1） solid and continuum-shell elements predict the experimental results well; （2） for C3DSR elements, NEL of at least 3 is required to obtain reliable results and a relative error of 29% can occur as NEL is varied in the range of 1-3; （3） specifying damping factor typically works well in Abaqus/Emplicit simulation of springback and the springback results are sensitive to the magnitude of damping factor. In addition, the explanations of the effect rules are given and a guideline is added.     

Estimation of the Love and Shida numbers: h2, l2 using SLR data for the low satellites

In this paper we present results for the global elastic parameters: Love number h₂ and Shida number l₂ derived from the analysis of Satellite Laser Ranging (SLR) data. SLR data for the two low satellites STELLA (H = 800 km) and STARLETTE (H = 810 km) observed during 2.5 years from January 3, 2005 until July 1, 2007 with 18 globally distributed ground stations were analyzed. The analysis was done separately for the two satellites. We do a sequential analysis and study the stability and convergence of the estimates as a function of length of the data set used.     

降低气动非线性的高超飞行器总体优化方法研究

针对高超声速飞行器严重气动非线性特性给控制系统设计提出的高要求,基于推广的随控布局思想,从控制系统设计角度对高超声速飞行器总体提出气动非线性程度低的优化设计指标。引入高超声速飞行器气动非线性特性度量——非线性度的定义,通过气动工程估算建立非线性度与飞行器总体外形参数关系的表征模型,将非线性度表示为总体外形参数的函数;采用遗传算法求解以总体外形参数为决策变量和以非线性度最小为目标函数的优化问题;最终确定随控优化思想下的高超声速飞行器总体优化策略。算例分析表明,本文提出的总体随控优化方法对于改善高超声速飞行器的气动非线性特性简单有效。     

Correction of B2bot for NeQuick during low solar activity at Hainan station

This work is a continuation of the previous article and it focuses on low solar activity and modeling effort. NeQuick model uses Epstein layer formalism to model each part of the profile. We study the diurnal and seasonal variations of B2_bot, ΔB2 (B2_best − B2_NeQuick2) and R (B2_best/B2_{NeQuick 2}) at Hainan station during low solar activity. The results show it is possible to improve the B2_bot parameter of the NeQuick model at that region during low solar activity. Then, we use a function ?(t) with LT in different seasons to correct the B2_bot formula of NeQuick 2. The correction shows that (1) By the correction formula, the B2_bot of NeQuick is improved. The maximum standard deviation is improved for 9 km. (2) The correction formula is more effective in summer than in equinox and winter and performs better during early morning hours than during the rest of the day.     

月壤剖面锥型螺旋刃成孔钻头设计

针对月壤剖面钻进成孔探测需求,提出一种锥型螺旋刃成孔钻头,建立其钻进排屑性能的理论模型,并以此开展钻头结构参数的优化设计。在此基础上,分析螺旋刃切削姿态及其切削参数,基于直线刃平面切削理论建立锥型螺旋刃成孔钻头钻进切削负载预估模型,开展锥型螺旋刃成孔钻头模拟月壤剖面钻进负载特性试验验证。研究结果表明,相比于直线刃钻头,锥型螺旋刃成孔钻头的钻进排屑性能更优,而且钻进切削负载模型与试验结果具有较好的吻合度。研究成果对我国拟实施的月面钻取采样工程具有重要的借鉴价值。