浅谈温度变化对光学镜面的影响

环境温度变化将导致光学镜内的温度分布发生变化,文章分析了光学镜内不同的温度分布对其面形造成的危害,以及对光学系统成像质量的影响,对空间光学系统光学镜温度场设计具有一定参考价值.     

实现快速轨道大机动的混合制导策略研究

主要研究了在有限推力情况下远程快速轨道交会的制导控制问题,提出了采用速度增益制导结合E制导的混合轨控方案实现两冲量轨道精确交会。通过仿真验证,各方向制导位置控制精度在100 m量级,各方向速度控制精度在m/s量级,2种制导方法能很好地实现交班转换。该方法工程可实现性好,可满足远程快速轨道交会制导要求。     

激光驱动飞片速度的理论分析

激光驱动飞片技术是模拟微流星体/空间碎片对航天器外露材料/部件超高速撞击,用于开展撞击累积损伤效应与材料性能退化的研究,也是进行航天器在轨寿命预估和空间碎片防护研究的重要技术手段。飞片速度是衡量激光驱动飞片技术水平的关键性参数之一。文章从Lawrence改进的Gurney模型出发,着重分析了激光输出能量、脉宽、聚焦光斑大小以及飞片靶厚度等参数与飞片速度大小的关系,提出激光驱动飞片技术中提高飞片速度的主要途径:其他条件一定时,薄靶较厚靶更易获取高速飞片;小光斑较大光斑更易获取高速飞片;长脉宽高能激光器或短脉宽低能激光器比较适合获取高速飞片。以上结论对从试验上获取高速飞片具有重要指导意义。     

三叉杆式万向联轴器采用调心轴承时的运动分析

分析了三叉杆式万向联轴器采用调心轴承时输出转角和输入转角之间的关系式,并得出这种联轴器为准等角速传动万向联轴器的结论;讨论了轴偏转角大小对输出输入转角差值的影响,分析表明,这种联轴器中转角差值的变化周期是输入轴自转周期的3倍。     

多级最优控制问题的提法与求解变分法的应用

本文讨论多级最优控制问题,给出该问题的数学提法以及变分法求解原理。特别,详细研究了级间分离时刻的连接条件。本文的工作为解决多级最优控制问题提供了途径。     

热流限制下的最优气动力辅助变轨

以变轨能量消耗最小为优化目标，应用极大值原理研究了飞行过程受热流限制和升力系统约束下的气动力辅助共面变轨问题，飞行过程成分第一自由弧段，约束弧段，第二自由弧段三个部分，讨论了升力系数的最优表达式，分析了飞行过程中两种约束的相互作用，给出了约束弧起始位置的角点条件和终端的横截条件下，对不同的初值选取方法讨论了三种计算策略，并给出了数值算例。     

A non-local vectorial total variational model for multichannel SAR image speckle suppression

This paper aims at the multichannel synthetic aperture radar(SAR)image speckle reduction.This paper proposes a novel energy minimized regularization model for multichannel image denoising,which is an extension of the non-local total variational model for gray-scale image.It contains two terms,namely the vectorial data fidelity term and the non-local vectorial total variation term.The latter is constructed by high-dimensional non-local gradient that contains the structure information of the multichannel image.The existence and the uniqueness of the solution of the model are proved.A fixed point iterative algorithm is designed to acquire the solution of this model.The convergence property of this algorithm is proved as well.This model is applied to the multipolarimetric and multi-temporal RADARSAT-2 images despeckling.The result shows that this model performs better than the original vectorial total variational model on texture preserving.     

微小推力下小卫星的轨道递推与推力标定

针对采用微小推力进行轨道机动的小卫星,考虑复杂摄动力的基础设计了一种高精度轨道外推和推力在轨标定算法.首先,建立了考虑地球复杂摄动力和微小推力的小卫星轨道动力学模型;然后基于动力学模型,利用变步长龙格库塔算法,设计了对微小推力小卫星进行高精度轨道外推的方法.随后通过无迹卡尔曼滤波器(UKF),设计在轨标定算法,对存在误...     

Rigidity spectrum of the 27-day variation of the galactic cosmic ray intensity in different epochs of solar activity

We study the temporal evolution of the power rigidity spectrum of the first (27 days) and the second (14 days) harmonics of the 27-day variation of the galactic cosmic ray intensity measured by neutron monitors in the period of 1965–2002. The rigidity spectrum of these variations can be approximated by a power law. We show the rigidity spectra of the first and the second harmonics of the 27-day variation of the galactic cosmic ray intensity have similar time profiles. These spectra are hard (γ ≈ 0.5 ± 0.1) and soft (γ ≈ 1.1 ± 0.2) during solar maximum and minimum activity, respectively. We ascribe this to the alternation of the sizes of the modulation regions responsible for the 27-day variation of the galactic cosmic ray intensity in different epochs of solar activity. Especially, the average radial sizes of the modulation regions of the 27-day variation and the heliolatitudinal extension of the heliolongitudinal asymmetry are smaller during solar minimum than during solar maximum. We show also, that the temporal changes of the power rigidity spectra of the first and the second harmonics of the 27-day variation of the galactic cosmic ray intensity are in a negative correlation with the changes of the rigidity spectrum of the corresponding 11-year variation.     

校罗差时磁偏差设定为零的机理分析

在飞机地面通常检查时,磁差给定器磁偏差值往往设定为当地磁差,才能得到正确的航向。校正磁罗差时,只有将磁差给定器设定为000.0,不然罗差计算会大大溢出指标。文章通过磁罗差校正的原理和校正方法的论述,进一步分析了校罗差时将磁偏给定器设定为000.0的工作机理。