航天器空间交会过程综合变轨策略研究

文章研究了空间交会远程导引阶段综合变轨问题的变轨策略方法和实用理论模型。文章首先简要描述了综合变轨的技术条件和策略方法 ;然后重点建立了多脉冲综合变轨的轨道动力学模型 ,并给出了数值求解方法 ;最后用自行开发的仿真程序进行了远程导引多脉冲综合变轨的算例仿真。仿真结果表明 ,该模型和算法具有工程实用性     

加油控制失效时飞机通气系统性能计算

飞机地面压力加油系统通气能力计算是飞机燃油系统设计的重要环节.基于流体网络算法,给出了飞机地面压力加油系统和通气系统的计算模型,并对某型飞机地面压力加油控制失效时,油箱通气系统的通气能力进行了计算,获得了油箱承受的压力.通过计算结果与最大压力限制的比较,验证了地面加油通气系统的通气能力.模型对飞机地面压力加油通气系统的设计具有指导意义.     

航天飞机气动力辅助异面轨道变换

本文研究了以气动力作为辅助动力,实现异面圆轨道的最优变换。以目标轨道面倾角最大为优化性能指标,获得了升力和滚转角的最优控制规律。文中提出了优化问题的一种参数搜寻方法,有利于问题的求解。文末对结果作了分析,讨论,并就有关的多种变换模态作了分析、对比,表明在一定条件下,气动力辅助变换有明显的优越性。     

Modeling and simulation of bow wave effect in probe and drogue aerial refueling

In a probe and drogue aerial refueling system, the bow wave of the receiver aircraft will produce a strong aerodynamic effect on the drogue once the receiver follows the drogue at a close distance. It is a major difficulty of docking control in the probe and drogue refueling. This paper analyses the bow wave effect and presents a simple method to model it. Firstly, the inviscid flow around the receiver is modeled based on the stream function defined by basic stream singularities.Secondly, a correction function is developed to eliminate the error caused by the absence of air viscosity. Then, the aerodynamic coefficients are used to calculate the induced aerodynamic force on the drogue. The obtained model is in an analytical form that can be easily applied to the controller design and the real-time simulations. In the verification part, computational fluid dynamics(CFD)simulation tests are conducted to validate the obtained flow fields and aerodynamic forces. Finally,the modeling method is applied to an F-16 receiver aircraft in a previously developed autonomous aerial refueling simulation system. The simulations results are analyzed and compared with the NASA flight-test data, which demonstrates the effectiveness of the proposed method.     

伴随卫星轨道保持

文中利用伴随轨道方程推导出伴随卫星相对运动状态转移方程。基于这一状态转移方程，研究了双脉冲校正中的伴随运动状态的变化，并得出需要的脉冲控制量的解析式。利用遗传算法对脉冲控制量进行了优化设计，求得使总脉冲最小的最优变轨时间，脉冲控制量和轨迹。     

Use of Optical Characteristics to Identify Orbiting Material

Knowledge of the observable properties of orbital debris is necessary to validate debris models for both the low Earth orbit (LEO) and the geosynchronous Earth orbit (GEO). Current methods determine the size and mass of orbital debris based on knowledge or assumption of the material type of the piece. Improvement in the knowledge of material is the goal of the research described herein. The process of using spectral absorption features to determine the material type is explored. A review of the optical measurements of orbital debris as well as current research in the area is discussed. Reflectances of common spacecraft materials are compared. The need for, and advances made possible by obtaining real data are explored. The prospects of the venture are investigated.     

多级航天器在有限推力情况下的最优变轨问题探讨

与航天运载器类似,航天器也可以有单级与多级之分。一个多级航天器是由几个具有动力装置的航天器经串联而成的组合体。本文研究这类航天器的最优变轨问题。多级航天器在有限推力情况下的最优变轨问题,实质上属于多级最优控制问题。本文应用多级最优控制问题的求解原理,讨论有限推力情况下,两级航天器在两共面圆轨道之间的两类最优转移问题,给出了确定最优推力程序和最优转移轨迹的定解方程和定解条件,特别考察了级间分离时刻应满足的条件。本文给出的原理同样适用于非圆形、非共面轨道之间的最优转移问题。     

Predictive Modeling and Parameter Optimization of Cutting Forces During Orbital Drilling

To optimize cutting control parameters and provide scientific evidence for controlling cutting forces,cutting force modeling and cutting control parameter optimization are researched with one tool adopted to orbital drill holes in aluminum alloy 6061.Firstly,four cutting control parameters(tool rotation speed,tool revolution speed,axial feeding pitch and tool revolution radius)and affecting cutting forces are identified after orbital drilling kinematics analysis.Secondly,hybrid level orthogonal experiment method is utilized in modeling experiment.By nonlinear regression analysis,two quadratic prediction models for axial and radial forces are established,where the above four control parameters are used as input variables.Then,model accuracy and cutting control parameters are analyzed.Upon axial and radial forces models,two optimal combinations of cutting control parameters are obtained for processing a13mm hole,corresponding to the minimum axial force and the radial force respectively.Finally,each optimal combination is applied in verification experiment.The verification experiment results of cutting force are in good agreement with prediction model,which confirms accracy of the research method in practical production.     

广义轨道根数空间的轨道机动可达性

在由动量矩矢量和偏心率矢量定义的广义轨道根数度量空间内,研究了在初始轨道的任意点施加幅值固定的单脉冲后卫星的可达区域,包括脉冲施加的位置任意、方向固定和位置固定、方向任意2种情况,给出了广义轨道根数空间中轨道机动的可达性判据.通过比较脉冲作用前后的广义轨道根数,评估了单脉冲对广义轨道根数的影响,并且利用数值仿真分析了脉冲作用位置、方向与广义轨道根数空间中度量的关系.最后,在广义轨道根数空间中给出了轨道到轨道的机动策略,验证了广义轨道根数的可行性.     

中轨道Walker导航星座在轨备份方案优化设计

针对中轨道Walker导航星座在轨备份方案的优化问题,首先提出了在轨备份星轨位优化设计方法,考虑星座运行期间在轨备份星与工作卫星存在共同提供服务的情况,选取PDOP值和可见卫星数作为轨位优化指标,建立了轨位优化模型,并基于NSGA-Ⅱ算法对不同轨位下在轨备份星对导航星座服务性能的提升效果进行仿真分析;然后,基于在轨备份星轨位的优化结果,建立在轨备份星替换的轨道机动模型,并综合考虑速度增量和替换时间,确定了以替换时间最少为优化目标的在轨备份星替换方案。结果表明,提出的在轨备份方案能有效满足备份星的设计需求,增强导航星座的服务性能,实现故障卫星的快速替换,可为导航星座备份星的建设提供借鉴。