嫦娥二号卫星轨道设计

嫦娥二号卫星的轨道设计是在充分继承嫦娥一号轨道设计的理论和方法的基础上进行的,并在此基础上做了适应性改进。轨道设计的主要内容包括参数选择、发射窗口、速度增量需求以及嫦娥二号卫星和嫦娥一号卫星不同点的对比,提出了整个飞行轨道的设计思想。     

Effects of in-track maneuver on Sun illumination conditions of near-circular low Earth orbits

By developing approximate analytical models considering the J₂ perturbation, the effects of an in-track maneuver on the orbital Sun illumination conditions of near-circular low Earth orbits are analyzed. First, two approximate models for the variations in orbital sunshine angles are developed, one for variations at a given time and the other for variations at a given argument of latitude. Next, two approximate models for variations in orbital arc in Earth shadow are developed, one considers the small eccentricity and the other uses the zero eccentricity. Finally, the developed approximate models are applied to analyzing the Sun illumination conditions of a typical in-track maneuver mission on a near-circular low Earth orbit. From the results obtained, three major conclusions can be drawn. First, the variations in orbital sunshine angles at a given time may reach tens of degrees when the drifting time reaches hundreds of orbital periods, and the approximate model for that situation cannot effectively approach the numerical results. Second, the variations in orbital sunshine angles for any given argument of latitude are only a couple of degrees even when the drifting time reaches 500 orbital periods, and the approximation model developed can effectively approach the numerical results. Third, for variations in orbital arc in Earth shadow, the approximate model considering the small eccentricity has simple expressions and can effectively approach the numerical results; in contrast, the approximate model using the zero eccentricity has relatively worse precision.     

典型轨道环境效应及对在轨卫星影响分析

近年来,各航天大国对空间轨道资源的挖掘与应用不断拓展.超低轨道、椭圆轨道、坟墓轨道、拉格朗日点等,因其在快速重访、定点观测、空间攻防、科学探索等方面的优势,逐步纳入各国防灾减灾、战事快响、导弹预警、空间突防和太阳观测等应用领域.随着卫星在轨经历的空间环境变得更加复杂,空间环境效应引发的卫星故障和异常情况日益突出.本文围...     

基于混合遗传算法的多冲量最优变轨

针对航天器多冲量最优变轨问题,建立了多冲量最优变轨的数值优化模型,给出了一种遗传算法(GA)与序列二次规划算法(SQP)结合的混合优化算法.该算法不需初值猜测,全局和局部搜索能力强并且计算效率高.仿真计算了燃料最优交会和时间最短拦截问题,比较了GA,SQP以及混合遗传算法的性能.针对混合遗传算法得到的不同冲量次数变轨的优化结果,分析了冲量次数对变轨性能指标的影响.结果表明混合遗传算法综合性能最高,冲量次数对不同性能指标的影响不同.仿真算例验证了模型和算法的有效性.     

部署retro-GEO巡视器的月球借力飞行轨道分析

retro-GEO是指逆行(retrograde)地球静止轨道(geostationary Earth orbit,GEO),该轨道与GEO轨道高度相同或相近,但倾角为180°,安装在retro-GEO卫星上的巡视器可每12 h对GEO带空间资产附近碎片环境安全预警.直接西向发射retro-GEO卫星存在地面测控和发射...     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

DORIS processing at the European Space Operations Centre

This paper gives an overview of the DORIS related activities at the Navigation Support Office of the European Space Operations Centre. The DORIS activities were started in 2002 because of the launch of the Envisat satellite where ESOC is responsible for the validation of the Envisat Precise Orbits and a brief overview of the key Envisat activities at ESOC is given. Typical orbit comparison RMS values between the CNES POE (GDR-C) and the ESOC POD solution is 6.5, 18.8 and 23.1 mm in radial-, along- and cross-track direction. In the framework of the generation of the ITRF2008 ESOC participated in the reprocessing of all three space geodetic techniques; DORIS, SLR, and GPS. Here the main results of our DORIS reprocessing, in the framework of the International DORIS Service (IDS), are given. The WRMS of the weekly ESOC solution (esawd03) for the 2004–2009 period compared to the IDS-1 combined solution is of the order of 12 mm. Based on the long time series of homogeneously processed data a closer look is taken at the estimated solar radiation pressure parameters of the different satellites used in this DORIS analysis. The main aim being the stabilization of the Z-component of the geocentre estimates. We conclude that the ESOC participation to the IDS ITRF2008 contribution has been beneficial for both ESOC and the IDS. ESOC has profited significantly from the very open and direct communications and comparisons that took place within the IDS during the reprocessing campaign.     

基于混合编程技术的AOCC应用软件快速仿真平台

介绍基于混合编程技术的AOCC应用软件的快速仿真平台的整体框架设计以及具体实现．基于该方法构建的快速仿真平台，能够满足软件开发人员对基于8086汇编语言开发的AOCC应用软件开、闭环调试和测试的要求，对提高软件的开发效率和保证软件的质量有积极意义．     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

连续推力机动轨道优化设计的贝塞尔曲线法

提出一种基于贝塞尔曲线的平面机动轨道设计方法。该方法将贝塞尔曲线方程与轨道形状方程相结合，利用得到的复合函数作为轨道方程来对机动轨道进行数学描述；通过约束条件获得可行的机动轨道族，由控制点设计给出具体的优化变量，将累积速度增量作为优化指标函数；并利用优化算法完成参数优化，从而得到最优机动轨道。最后针对设计的机动轨道推力峰值较大的问题，进一步提出了分段贝塞尔曲线法，在降低推力峰值的同时，可进一步降低燃料消耗，并在平面机动转移轨道设计的基础上，通过梯度下降对自由控制点进行修正，解决了考虑时间约束的平面轨道交会问题。