涡轮叶片疲劳-蠕变寿命稳健性优化方法

为了清晰地反映涡轮叶片的疲劳-蠕变交互作用,提高寿命预测结果的准确性及可靠性,并改善涡轮叶片疲劳寿命对随机变量的敏感程度,分别采用Manson-Coffin公式和Larson-Miller方程计算了涡轮叶片的低循环疲劳寿命和蠕变持久寿命,利用修正的时间-寿命分数法计算了涡轮叶片疲劳-蠕变损伤,在此基础上,将响应面法(RSM)与果蝇优化算法(FFOA)相结合,考虑载荷、材料参数、疲劳-蠕变交互程度的不确定性,对涡轮叶片疲劳寿命进行了稳健性优化设计。优化结果表明:涡轮叶片疲劳-蠕变小时寿命的概率区间减小了8.48%,验证了该优化方法的工程可行性。     

基于UKF的实时弹道解算参数稳健设计

在基于UKF(Unscented Kalman Filter,无迹卡尔曼滤波)的实时弹道解算应用中,外部环境不稳定的影响以及观测过程中野值的存在,使得基于经验参数设置的滤波易于发散.因此,需要针对指定型号调节和设置滤波器参数的取值,使其克服上述现象.针对这一问题,提出了基于理论弹道先验的参数稳健设计方法,对滤波器参数最优值进行预测.从滤波器的架构出发,梳理出影响滤波器性能的相关参数,结合稳健设计思想,外设计部分基于理论弹道先验信息,通过模拟弹道特征点构造弹道观测模型;而内设计部份,构造模型的测元数据进行正交试验,判断参数的显著性,获取相应的最优参数取值,从而为实时解算弹道的参数设置提供指导.实际数据试验结果表明,该方法可显著提高滤波器的实算稳健性和收敛性能.     

民用飞机虚拟维修可达性技术研究

结合民用飞机维修性设计的要求和特点,将虚拟现实技术引入到飞机维修性设计、分析与验证工作中,阐述了虚拟维修仿真的流程。通过可视性分析、实体可达分析、操作空间分析,给出了虚拟维修的可达性验证方法,实现设计中的维修性设计评价,从中找出影响维修性设计的因素进而及时改进,以提高整机维修性。     

基于永磁无刷电机磁场定向控制的平台伺服控制设计

介绍了基于永磁无刷电机(Brushless DC Motor,BLDC)和磁场定向控制(FOC)的平台伺服控制系统方案.阐述了一种基于FOC的伺服控制设计方法,描述了嵌入式系统的硬件与软件实现.通过实测对比了BLDC采用FOC方法与三相六拍法时伺服控制系统的转速波动情况,结果显示采用FOC显著提高了基于BLDC的伺服控制系统性能.     

可制造性设计在系统工程过程中的应用研究

本文针对复杂产品协同设计、开发与验证过程中的可制造性共性问题,以航空电子系统为典型的复杂系统对象,探讨了可制造性的概念内涵、工作边界、组织架构和开展时机,着重从系统设计和开发策划、系统需求捕获与定义、系统架构定义、系统详细设计与实现和系统验证子过程的角度,详细阐释了可制造性设计融入系统工程过程的实施思路,并结合具体的应用实例,对可制造性设计对产品高质量交付的正向影响进行了阐释,为可制造性工作在系统开发与设计中的落地推广指明了方向、奠定了基础。     

部署retro-GEO巡视器的月球借力飞行轨道分析

retro-GEO是指逆行(retrograde)地球静止轨道(geostationary Earth orbit,GEO),该轨道与GEO轨道高度相同或相近,但倾角为180°,安装在retro-GEO卫星上的巡视器可每12 h对GEO带空间资产附近碎片环境安全预警.直接西向发射retro-GEO卫星存在地面测控和发射...     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

DORIS processing at the European Space Operations Centre

This paper gives an overview of the DORIS related activities at the Navigation Support Office of the European Space Operations Centre. The DORIS activities were started in 2002 because of the launch of the Envisat satellite where ESOC is responsible for the validation of the Envisat Precise Orbits and a brief overview of the key Envisat activities at ESOC is given. Typical orbit comparison RMS values between the CNES POE (GDR-C) and the ESOC POD solution is 6.5, 18.8 and 23.1 mm in radial-, along- and cross-track direction. In the framework of the generation of the ITRF2008 ESOC participated in the reprocessing of all three space geodetic techniques; DORIS, SLR, and GPS. Here the main results of our DORIS reprocessing, in the framework of the International DORIS Service (IDS), are given. The WRMS of the weekly ESOC solution (esawd03) for the 2004–2009 period compared to the IDS-1 combined solution is of the order of 12 mm. Based on the long time series of homogeneously processed data a closer look is taken at the estimated solar radiation pressure parameters of the different satellites used in this DORIS analysis. The main aim being the stabilization of the Z-component of the geocentre estimates. We conclude that the ESOC participation to the IDS ITRF2008 contribution has been beneficial for both ESOC and the IDS. ESOC has profited significantly from the very open and direct communications and comparisons that took place within the IDS during the reprocessing campaign.     

基于混合编程技术的AOCC应用软件快速仿真平台

介绍基于混合编程技术的AOCC应用软件的快速仿真平台的整体框架设计以及具体实现．基于该方法构建的快速仿真平台，能够满足软件开发人员对基于8086汇编语言开发的AOCC应用软件开、闭环调试和测试的要求，对提高软件的开发效率和保证软件的质量有积极意义．     

Method of virtual trajectories for the design of gravity assisted missions

A method of virtual trajectories is proposed for the design of multiple gravity assist trajectories. The method comprises two principal stages. First, for a chosen planetary sequence, a database of virtual trajectories is tabulated. Then the database screening and refinement are performed. The design of trajectory to Jupiter is presented.